Learning Materials
Features
Discover
Have you ever watched birds perched happily on a power line? Why is it that the approximately 500 000 volts of electricity do nothing to them? We know that the 120 volts in our outlets at home are deadly to us, so can it be that birds are highly insulated? I agree that birds are not great conductors, I mean, have you ever seen one leading an orchestra? Jokes aside, the answer to this conundrum is that there is no voltage difference between the feet of the birds on the cable. The current will pass through the wire instead of through the birds (which would require extra energy). An understanding of voltage is fundamentally important to gaining a complete understanding of electricity.
Millions of flashcards designed to help you ace your studies
Sign up for freeWhat is Ohm's law in mathematical form?
AC voltages vary ... with time.
Voltage is always measured at a single point in a circuit.
What is the derived unit of voltage?
What is the equation for the voltage \(V\) between two points in terms of the work done \(W\) on a charge \(Q\) moved between those points?
What instrument is used to measure voltage?
A voltmeter must be connected in ... to a specific component in an electric circuit.
The work done to move \(8.0\,\mathrm{mC}\) of charge through a resistor is \(160\,\mathrm{mJ}\). What is the voltage across the resistor?
A battery converts chemical potential energy to electrical energy.
How much work is done in moving a \(3.0\,\mathrm{C}\) charge through a voltage of \(10\,\mathrm V\)?
... voltages remain constant for a simple circuit with just a resistor.
What is Ohm's law in mathematical form?
AC voltages vary ... with time.
Voltage is always measured at a single point in a circuit.
What is the derived unit of voltage?
What is the equation for the voltage \(V\) between two points in terms of the work done \(W\) on a charge \(Q\) moved between those points?
What instrument is used to measure voltage?
A voltmeter must be connected in ... to a specific component in an electric circuit.
The work done to move \(8.0\,\mathrm{mC}\) of charge through a resistor is \(160\,\mathrm{mJ}\). What is the voltage across the resistor?
A battery converts chemical potential energy to electrical energy.
How much work is done in moving a \(3.0\,\mathrm{C}\) charge through a voltage of \(10\,\mathrm V\)?
... voltages remain constant for a simple circuit with just a resistor.
Achieve better grades quicker with Premium
Geld-zurück-Garantie, wenn du durch die Prüfung fällst
Did you know that StudySmarter supports you beyond learning?
Review generated flashcards
Start learning or create your own AI flashcards
Team Voltage Teachers
Voltage is a quantity that is always measured between two points in a circuit and no current can flow without a voltage present.
The voltage (or potential difference) between two points in a circuit is the work done per unit charge as the unit charge moves between those two points.
From the definition, we see that the unit for voltage is the joule per coulomb (\(\mathrm{JC}^{-1}\)). The derived unit of voltage is the volt, denoted as \(\mathrm V\), which is the same as a joule per coulomb. That is
\[1\,\mathrm{V}=1\,\mathrm{JC}^{-1}\]
where we see that charge relates voltage to energy. Voltage is measured by a voltmeter but a modern alternative is a digital multimeter that can be used to measure voltage, current and other electric quantities. The figure below is of a typical analog voltmeter.
A typical analog voltmeter is used to measure the voltage between two points in an electric circuit, Pxhere.
The definition of voltage is the work done per unit charge and hence we can use this to write a basic formula for a voltage as below:
\[\text{voltage}=\dfrac{\text{work done (energy transferred)}}{\text{charge}}\]
or
\[V=\dfrac{W}{Q}\]
where the voltage (\(V\)) is measured in volts (\(\mathrm V\)), the work done (\(W\)) is measured in joules (\(\mathrm J\)) and the charge (\(Q\)) is measured in coulombs (\(\mathrm C\)). Looking at the formula above, we are reminded that work done and energy transferred are the same. The amount of energy transferred to a circuit component per unit charge that flows through it gives us the voltage measured across that circuit component. Look at the following example.
A lamp has a voltage rating of \(2.5\,\mathrm V\). How much energy is transferred to the lamp when \(5.0\,\mathrm C\) of charge passes through it?
Solution
To solve this problem, we can use the equation
\[V=\dfrac{W}{Q}\]
where the voltage of the lamp \(V=2.5\,\mathrm V\) and the charge passing through the lamp \(Q=5.0\,\mathrm C\). We can then rearrange the equation to solve for the unknown energy as follows:
\[\begin{align}W&=QV=\\&=5.0\,\mathrm C\times 2.5\,\mathrm V=\\&=13\,\mathrm J\end{align}\]
which means that the lamp receives \(13\,\mathrm J\) of energy for every \(5.0\,\mathrm C\) of charge that passes through it.
We have stated that voltage is measured over two different points in an electric circuit. This is because energy will be transferred to devices in that circuit, so the work done must be measured by an energy difference between two points on either side of those devices. This means that a voltmeter must be connected in parallel in a circuit. The figure below shows a simple circuit with a voltmeter (labelled with a V) connected in parallel to a lamp to measure the voltage across the lamp. This voltage is simply the energy transferred to the lamp per unit charge that flows through it.
A voltmeter is connected in parallel to a lamp to measure the voltage across it, Wikimedia Commons CC BY-SA 4.0.
The law of conservation of energy states that energy can neither be created nor destroyed but simply converted from one form to another. If the provided voltage in a circuit is the energy available to be transferred per unit charge, where does this energy come from? In the case of many electric circuits, the answer to this question is a battery. A battery converts chemical potential energy to electrical energy, allowing charge to be driven around the circuit. This energy per unit charge is called the electromotive force (emf) of a circuit. Remember that energy per unit charge is simply voltage, so the emf in a circuit is the voltage across the battery when there is no current flowing.
This is why we typically think of the voltage of everyday appliances as being related to the energy usage of that appliance. In the context of electricity, it's more correct to think of voltage as the energy per unit charge across the appliance.
We have thus far considered simple circuits in which current always flows in one direction. This is called direct current (DC). There is another type of current that is more common; alternating current (AC).
A circuit in which current flows in one direction is a DC circuit. A typical battery has a positive and a negative terminal and can only push charge in one direction in a circuit. Batteries, therefore, can provide the electromotive force (emf) for DC circuits. If a DC circuit has a fixed resistance, the current will remain constant. The energy transferred to the resistor will therefore remain constant and so will the work done per unit charge. For a circuit with a fixed resistance, the DC voltage is always constant; it does not change with time.
The type of electricity that is supplied to homes around the world comes in the form of alternating current (AC). Alternating current can be transported long distances making it ideal for this purpose. In an AC circuit, the current flows in two directions along wires; they oscillate back and forth. The electrical energy still only flows in one direction so appliances can still be powered. Since the direction of the current is constantly changing, the amount of energy transferred to each circuit component must also be constantly changing, which means the voltage between any two points in the circuit is always changing. The AC voltage varies sinusoidally with time. The figure below shows a sketch of both AC and DC voltage vs time.
A sketch that shows the shape of a DC voltage vs time graph as well as an AC voltage vs time graph, Vaia Originals.
We have studied the definition of voltage and seen its relation to the energy transfer in an electric circuit. We can also relate the voltage to other electrical quantities; in our case resistance and current. Ohm's Law describes this relationship as follows; the voltage across a conductor (\(V\)) at a constant temperature is directly proportional to the current (\(I\)) in the conductor. That is
\[V\propto I\]
\[V=IR\]
where the constant of proportionality, in this case, is the resistance of the conductor. There are many other expressions for the voltage in electric circuits that depend on the specific circuit. The basic understanding of voltage and the volt, however, does not change between scenarios.
Sign up for free to gain access to all our flashcards.
What is voltage in physics?
The voltage between two points in a circuit is the work done per unit charge as the unit charge moves between those two points.
What is the unit for voltage?
The unit for voltage is the volt (V).
What are the two types of voltages?
Direct current voltage (DC voltage) and alternating current voltage (AC voltage).
What is an example of voltage?
A typical AA battery has a voltage of 1.5 V.
How to calculate voltage in physics?
To calculate voltage in physics, we can use other known quantities in an equation. For example, if we know the work W done by a voltage on a particle with charge Q, then we know that that particle went through a voltage V of V=W/Q.
At StudySmarter, we have created a learning platform that serves millions of students. Meet the people who work hard to deliver fact based content as well as making sure it is verified.
Lily Hulatt is a Digital Content Specialist with over three years of experience in content strategy and curriculum design. She gained her PhD in English Literature from Durham University in 2022, taught in Durham University’s English Studies Department, and has contributed to a number of publications. Lily specialises in English Literature, English Language, History, and Philosophy.
Get to know Lily
Gabriel Freitas is an AI Engineer with a solid experience in software development, machine learning algorithms, and generative AI, including large language models’ (LLMs) applications. Graduated in Electrical Engineering at the University of São Paulo, he is currently pursuing an MSc in Computer Engineering at the University of Campinas, specializing in machine learning topics. Gabriel has a strong background in software engineering and has worked on projects involving computer vision, embedded AI, and LLM applications.
Get to know Gabriel
Vaia is a globally recognized educational technology company, offering a holistic learning platform designed for students of all ages and educational levels. Our platform provides learning support for a wide range of subjects, including STEM, Social Sciences, and Languages and also helps students to successfully master various tests and exams worldwide, such as GCSE, A Level, SAT, ACT, Abitur, and more. We offer an extensive library of learning materials, including interactive flashcards, comprehensive textbook solutions, and detailed explanations. The cutting-edge technology and tools we provide help students create their own learning materials. StudySmarter’s content is not only expert-verified but also regularly updated to ensure accuracy and relevance.
Learn moreSave explanations to your personalised space and access them anytime, anywhere!
Sign up with Email Sign up with AppleBy signing up, you agree to the Terms and Conditions and the Privacy Policy of Vaia.
Already have an account? Log in
Sign up to highlight and take notes. It’s 100% free.
Explanations 
Textbooks 
Exams 
GCSE 
IGCSE 
AS 
A Level 
International A Level 
University Admissions Tests 
Flashcards 
Vaia AI 
Notes 
Study Plans 
Study Sets 
Find a job 
Find a degree 
Student Deals 
Magazine 
Mobile App 
