Learning Materials
Features
Discover
In 1914, a pivotal result was obtained after the Franck-Hertz experiment that made even Albert Einstein say, "It's so lovely it makes you cry." James Franck and Gustav Hertz had multiple questions: Are there gaps between the amounts of energy an atom can have? Could the atom hit by the electron take some energy and store it as an internal energy gain? If it can store, can this energy take any value from small to large? Or is it selected in values that are strictly limited to certain amounts? To seek answers to their questions, James Franck and Gustav Hertz experimented with bombarding atoms with electrons. This article will help you understand the experiment and its applications.
Millions of flashcards designed to help you ace your studies
Sign up for free
Achieve better grades quicker with Premium
Geld-zurück-Garantie, wenn du durch die Prüfung fällst
Did you know that StudySmarter supports you beyond learning?
Review generated flashcards
Start learning or create your own AI flashcards
Team Franck Hertz Experiment Teachers
The Franck-Hertz experiment is a historically significant physics experiment. The Bohr-atom model, which pioneered quantum mechanics, was firmly supported by this experiment. Moreover, it is the first experimental verification of the existence of discrete energy states in atoms, performed (1914) by the German physicists James Franck and Gustav Ludwig Hertz.
The purpose of the experiment is to demonstrate the concept of quantization of the energy levels under Bohr's model of an atom.
Originally, the experiment was carried out with the help of a vacuum tube at a temperature of \(115 °C.\) The tube was placed with the help of three electrodes - a cathode which emits electrons, a metal grid and an anode. The voltage of the grid is kept positive with respect to the cathode to draw more electrons towards it.
Since the grid is kept at a positive potential, electrons are accelerated towards it after they are emitted by the cathode. The collecting plate is kept at a negative potential with respect to the grid. Reaching the grid, some will pass through it, and some will be slowed down and fall back into the grid. Those will reach the plate, and the equivalent current will be measured.
As long as the collision is elastic, there is no loss of energy. The current increases as the voltage increase till it reaches a particular value - \(4.9\;\mathrm{eV}\) for Mercury and \(19\;\mathrm{eV}\) for neon, where the collision becomes inelastic. The electron loses its energy and the measured current drops.
This resulted in the prediction of quantum theory that electrons occupy only discrete, quantized energy states.
In this section, we will learn more about the two types of collisions, elastic and inelastic, early quantum theory, and the Frank-Hertz experiment with neon gas.
Franck and Hertz explained the experiment in terms of collisions between the electrons and the mercury atoms. When the speed of elastic collision of electrons exceeds about 1.3 million meters per second, it becomes inelastic. This speed is equivalent to the kinetic energy of \(4.9\;\mathrm{eV}\). When the voltage reaches \(4.9\;\mathrm{eV}\), it results in the slowing down of electrons, resulting in a drop in current.
If the electron does not have enough energy to raise the atom to a higher energy level, the collision of the electron sent onto the atom will be elastic. The electron leaves the gas chamber without losing its energy.
If the energy of the electron is higher than the excitation energies of the atom, the atom receives the energy required for its excitation from the electron, and if there is, the electron leaves the gas chamber with its remaining energy. This collision is called an inelastic collision.
The basic principle of the Bohr model is that the possible binding energies of an electron to the nucleus of an atom are discrete. A positive ion will be produced as the collision happens at the binding energy, ejecting the electron from the atom.
The Bohr model of the atom, although not a completely up-to-date quantum model of the atom, describes many of the accepted features of atomic theory.
The Bohr model describes the atom as consisting of negatively charged electrons orbiting in circles, due to the Coulomb force, around a central positively charged nucleus. In Bohr's model, the electrons can only orbit at certain radii, and the electron's energy remains constant at each radius. The electron can move from one energy level to another by absorbing or emitting radiation. The Franck-Hertz experiment provided support for the Bohr model of the atom. In the Franck-Hertz experiment, electrons were accelerated through a low-pressure gas.
Hence, the Franck-Hertz experiment is the first direct experimental proof of the Bohr relation.
For Neon gas, when the accelerated voltage excites the electrons in the gas, it produces a glow. There are about ten exciting levels within the range of \(18.3\;\mathrm{eV}\) to \(19.5\;\mathrm{eV}\). The energy difference between excited and de excited levels gives the light in the visible range of the spectrum. Likewise, the scenario is observed in neon gas at about \(19\;\mathrm{eV}\). An additional advantage of neon for instructional laboratories is that the tube can be used at room temperature.
Atoms in excited states emit radiation at discrete frequencies. The frequency of the radiation \(\nu\) is mathematically represented as :
\[\Delta E = h\nu\]
where \(\Delta E\) is the change in the atomic energy levels and \(h\) is the Planck constant.
With the emission of radiation at discrete frequencies, it is direct evidence that energy levels are quantized.
If an electron with an energy of \(4.9\;\mathrm{eV}\) collides with a mercury atom, this gas atom gains energy and becomes unstable. After a short time, it scatters this energy as photons and returns to its ground state. The electron continues on its way with an energy of \(0.04\;\mathrm{eV}\)
An electron with an energy of \(3.85\;\mathrm{eV}\) does not change the energy of the mercury atom. In other words, this electron passes through the atom without excitation.
The largest value of the energy levels is called the ionization energy (\(10.40\;\mathrm{eV}\) for Mercury). If the energy of the electron is greater than or equal to the ionization energy, the atom is ionized. If the mercury atom is excited with an electron with an energy of \(12.00\;\mathrm{eV}\), an electron is removed from the atom and becomes a positively charged ion.
The state in which the atom is before any excitation energy is given is called the ground state. The smallest energy value that can remove an electron from an atom is called ionization energy.
Sign up for free to gain access to all our flashcards.
What is the purpose of franck hertz experiment?
The purpose is to demonstrate the concept of quantization of the energy levels under Bohr's model of an atom.
How many electrodes are used in Hertz experiment?
The tube was placed with the help of three electrodes - a cathode emitting electrons, a metal grid and an anode.
How density affects franck hertz experiment?
Density affects the shape of the Franck-Hertz curve.
Why argon is used in Franck-Hertz experiment?
The use of Argon, which is preferred as it is a noble gas, is because its atoms do not bind to each other to form molecules. Also, it does not require vaporization, unlike mercury.
What did Franck-Hertz experiment prove?
Franck-Hertz experiment is the first direct experimental proof of the Bohr relation.
At StudySmarter, we have created a learning platform that serves millions of students. Meet the people who work hard to deliver fact based content as well as making sure it is verified.
Lily Hulatt is a Digital Content Specialist with over three years of experience in content strategy and curriculum design. She gained her PhD in English Literature from Durham University in 2022, taught in Durham University’s English Studies Department, and has contributed to a number of publications. Lily specialises in English Literature, English Language, History, and Philosophy.
Get to know Lily
Gabriel Freitas is an AI Engineer with a solid experience in software development, machine learning algorithms, and generative AI, including large language models’ (LLMs) applications. Graduated in Electrical Engineering at the University of São Paulo, he is currently pursuing an MSc in Computer Engineering at the University of Campinas, specializing in machine learning topics. Gabriel has a strong background in software engineering and has worked on projects involving computer vision, embedded AI, and LLM applications.
Get to know Gabriel
Vaia is a globally recognized educational technology company, offering a holistic learning platform designed for students of all ages and educational levels. Our platform provides learning support for a wide range of subjects, including STEM, Social Sciences, and Languages and also helps students to successfully master various tests and exams worldwide, such as GCSE, A Level, SAT, ACT, Abitur, and more. We offer an extensive library of learning materials, including interactive flashcards, comprehensive textbook solutions, and detailed explanations. The cutting-edge technology and tools we provide help students create their own learning materials. StudySmarter’s content is not only expert-verified but also regularly updated to ensure accuracy and relevance.
Learn moreSave explanations to your personalised space and access them anytime, anywhere!
Sign up with Email Sign up with AppleBy signing up, you agree to the Terms and Conditions and the Privacy Policy of Vaia.
Already have an account? Log in
Sign up to highlight and take notes. It’s 100% free.
Explanations 
Textbooks 
Exams 
GCSE 
IGCSE 
AS 
A Level 
International A Level 
University Admissions Tests 
Flashcards 
Vaia AI 
Notes 
Study Plans 
Study Sets 
Find a job 
Find a degree 
Student Deals 
Magazine 
Mobile App 
