The Alright Manufacturing Company in Rochester, Minnesota, assembles and tests electronic components used in smartphones. Consider the following data regarding component T24 (amounts are per unit):

Direct materials cost \( 80.00

Direct labor cost 20.00

Activity-based costs allocated ?

Total manufacturing product cost ?

The activities required to build the component follow:

Activity Allocation Base Cost Allocated to Each Unit

Start station Number of raw component chassis 4 * \) 1.50 = \( 6.00

Dip insertion Number of dip insertions ? * 0.30 = 9.60

Manual insertion Number of manual insertions 10 * 0.50 = ?

Wave solder Number of components soldered 4 * 1.90 = 7.60

Backload Number of backload insertions 7 * ? = 4.20

Test Number of testing hours 0.43 * 90.00 = ?

Defect analysis Number of defect analysis hours 0.15 * ? = 12.00

Total activity-based costs \) ?

Requirements

2. Why might managers favor this ABC system instead of Alright’s older system, which allocated all manufacturing overhead costs on the basis of direct labor hours?

Short Answer

Expert verified

Answer

The activity-based costing is preferred over traditional methods due to reasonable allocation based on different activities associated with different products.

Step by step solution

01

Activity-based costing system

Activity-based costing system is a procedure for allocating costs based on different tasks, operations, or procedures. Under activity-based costing, the overhead costs are segregated between different activities and then the different activities costs are allocated to different products or services.

02

Why activity-based costing is preferred over traditional costing

Under traditional costing, the overhead costs are allocated based on a single allocation base. That allocation base may or may not be relevant to all products. So, the cost ascertained under the traditional method may be relevant for some products but may not be relevant or fair for other products.

Under activity-based costing, the overheads are allocated based on the activities associated with different products. In this way, all products are charged for the relevant activities performed for that product. So, the cost ascertained for different products under this system is relevant and fair for all products.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Question:Treat Dog Collars uses activity-based costing. Treat’s system has the following features:

___________________________________________________________________

Activity Allocation BasePredetermined

Overhead Allocation Rate

Purchasing Number of purchase orders \( 60.00 per purchase order

Assembling Number of parts 0.36 per part

Packaging Number of finished collars 0.19 per collar

___________________________________________________________________

Each collar has three parts, direct materials cost is \)5.00 per collar, and direct laborcost is \(4.00 per collar. Suppose Animal Hut has asked for a bid on 30,000 dog collars.Treat will issue a total of 175 purchase orders if Animal Hut accepts Treat’s bid.

Requirements

1. Compute the total estimated cost Treat will incur to purchase the needed materialsand then assemble and package 30,000 dog collars. Also compute the cost percollar.

2. For bidding, Treat adds a 40% markup to total cost. What total price will the companybid for the entire Animal Hut order?

3. Suppose that instead of an ABC system, Treat has a traditional product costingsystem that allocates indirect costs at the rate of \)9.50 per direct labor hour. Thedog collar order will require 9,000 direct labor hours. What total price will Treat bidusing this system’s total cost?

4. Use your answers to Requirements 2 and 3 to explain how ABC can help Treatmake a better decision about the bid price it will offer Animal Hut.

Franklin, Inc. uses activity-based costing to account for its chrome bumper manufacturing process. Company managers have identified four manufacturing activities:

materials handling, machine setup, insertion of parts, and finishing. The budgeted activity costs for 2018 and their allocation bases are as follows:

Activity Total Budgeted Cost Allocation Base

Materials handling \( 12,000 Number of parts

Machine setup 3,100 Number of setups

Insertion of parts 42,000 Number of parts

Finishing 86,000 Finishing direct labor hours

Total \) 143,100

Franklin expects to produce 500 chrome bumpers during the year. The bumpers are expected to use 4,000 parts, require 10 setups, and consume 1,000 hours of finishing time.

Requirements

1. Compute the predetermined overhead allocation rate for each activity.

Haworth Company is a management consulting firm. The company expects to incur \(167,500 of indirect costs this year. Indirect costs are allocated based on the following activities:

Activity

Estimated cost

Allocation Base

Estimated quantity of allocation base

Predetermined

Overhead allocation rate

Site visits

\) 45,000

Number of visits

900 visits

\( 50 per visit

Documentation Preparation

122,500

Number of pages

3,500 Pages

\) 35 per page

Total Indirect costs

\( 167,500

Haworth bills clients at 120% of the direct labor costs. The company has estimated direct labor costs at \)240 per hour. Last month, Haworth completed a consulting job for Client 76 and used the following resources:

Allocation Base Client 76

Direct labor hours 60

Visits 5

Pages 50

Determine the total cost of the consulting job and the operating income earned.

Loiselle manufactures high-quality speakers. Suppose Loiselle is considering spending the following amounts on a new quality program:

___________________________________________________________________

Additional 20 minutes of testing for each speaker \( 625,000

Negotiating and training suppliers to obtain higher-quality

materials and on-time delivery 430,000

Redesigning the speakers to make them easier to manufacture 1,250,000

Loiselle expects this quality program to save costs as follows:

__________________________________________________

Reduce warranty repair costs \) 275,000

Avoid inspection of raw materials 580,000

Avoid rework because of fewer defective units 825,000_

It also expects this program to avoid lost profits from the following:

___________________________________________________

Lost profits due to disappointed customers $ 920,000

Lost production time due to rework 278,000

Requirements

1. Classify each of these costs into one of the four categories of quality costs (prevention, appraisal, internal failure, or external failure).

2. Should Loiselle implement the quality program? Give your reasons.

Martin, Inc. manufactures bookcases and uses an activity-based costing system. Martin’s activity areas and related data follow:

Activity

Budgeted Cost of Activity

Allocation Base

Predetermined Overhead Allocation Rate

Materials handling

\( 230,000

Number of parts

\)1.50

Assembly

3,200,000

Number of assembling direct labor hours

16.00

Finishing

150,000

Number of finished units*

3.00

*Refers to the number of units receiving the finishing activity, not the number of units transferred to Finished Goods Inventory

Martin produced two styles of bookcases in April: the standard bookcase and an unfinished bookcase, which has fewer parts and requires no finishing. The totals for quantities, direct materials costs, and other data follow:

Product

Total Units Produced

Total Direct materials Costs

Total Direct Labor Costs

Total Number of Parts

Total Assembling Direct Labor Hours

Standard bookcase

3,000

\(54,000

\)67,500

9,000

4,500

Unfinished bookcase

3,500

56,000

52,500

7,000

3,500

Requirements

1. Compute the manufacturing product cost per unit of each type of bookcase.

See all solutions

Recommended explanations on Business Studies Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free