(Depreciation for Partial Period—SL, SYD, and DDB) Alladin Company purchased Machine #201 on May 1, 2017. The following information relating to Machine #201 was gathered at the end of May.

Price

\(85,000

Credit terms

2/10, n/30

Freight-in

\) 800

Preparation and installation costs

\( 3,800

Labor costs during regular production operations

\)10,500

It is expected that the machine could be used for 10 years, after which the salvage value would be zero. Alladin intends to use the machine for only 8 years, however, after which it expects to be able to sell it for $1,500. The invoice for Machine #201 was paid May 5, 2017. Alladin uses the calendar year as the basis for the preparation of financial statements.

Instructions

  1. Compute the depreciation expense for the years indicated using the following methods. (Round to the nearest dollar.)
    1. Straight-line method for 2017.
    2. Sum-of-the-years’-digits method for 2018.
    3. Double-declining-balance method for 2017.
  2. Suppose Kate Crow, the president of Alladin, tells you that because the company is a new organization, she expects it will be several years before production and sales reach optimum levels. She asks you to recommend a depreciation method that will allocate less of the company’s depreciation expense to the early years and more to later years of the assets’ lives. What method would you recommend?

Short Answer

Expert verified

Answer

a) Depreciation

  1. Straight-line method = $7,342
  2. Sum of years digits method = $17,131
  3. Double-declining–balance method = $14,683

b) Double declining method.

Step by step solution

01

Meaning of Depreciation

Depreciation is an accounting term used as an expense in the books of accounts for the assets whose value declines over time. It is computed at the end of the year or whenever an asset is sold.

02

(a 1) Calculation of depreciation using the straight-line method.

Computing cost of the machine

Purchase price

$85,000

Add: Freight-in

$800

Preparation and installation Cost

$3,800

Total Capital Cost of Machine

$89,600

Calculating depreciation as per the straight-line method annually

Depreciation=Costofasset-SalvagevalueUsefullife=$89,600-$1,5008=$88,1008=$11,013

Calculating depreciation for 2017 for eight months (from May to December)

Depreciation=Annualdepreciation×NumberofmonthsMonthsinayear=$11,013×812=$7,342

03

(a 2) Calculation of depreciation using the Sum-of-the-years’-digits method.

Calculating the sum of years’ digit

Sumofyeardigit=nn-12=88-12=36

Calculating depreciation for 2018

Depreciation=(Costofasset-Salvagevalue)×NumberofyearsofremaininglifeofassetTotalofalldigitsofthelifeofasset=($89,600-$1,500)×736=$88,100×736=$17,131


04

(a 3) Calculation of depreciation using the Double-declining-balance method.

Calculating straight-line depreciation rate

Straightlinedepreciationrate=AnnualdepreciationCostofasset-Salvagevalue×100=$11,01388,100×100=12.5%

Calculating depreciation for 2017

Depreciation=2×SLDP×BV×NumberofmonthsMonthsinayear=2×12.5%×$88,100×812=$14,683


Note: SLDP = Straight line depreciation percent

BV = Book value at the beginning of the period



05

(b) Explaining the methods that should be recommended for the company.

Early in the asset life, the double-declining balance approach results in a higher depreciation cost while the depreciation cost decreases later.

When dealing with assets that depreciate rapidly, this strategy makes sense.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

(Depreciation Concepts) As a cost accountant for San Francisco Cannery, you have been approached by Phil Perriman, canning room supervisor, about the 2017 costs charged to his department. In particular, he is concerned about the line item “depreciation.” Perriman is very proud of the excellent condition of his canning room equipment. He has always been vigilant about keeping all equipment serviced and well oiled. He is sure that the huge charge to depreciation is a mistake; it does not at all reflect the cost of minimal wear and tear that the machines have experienced over the last year. He believes that the charge should be considerably lower.

The machines being depreciated are six automatic canning machines. All were put into use on January 1, 2017. Each cost \(625,000, having a salvage value of \)55,000 and a useful life of 12 years. San Francisco depreciates this and similar assets using double-declining-balance depreciation. Perriman has also pointed out that if you used straight-line depreciation, the charge to his department would not be so great.

Instructions

Write a memo dated January 22, 2017, to Phil Perriman to clear up his misunderstanding of the term “depreciation.” Also, calculate year-1 depreciation on all machines using both methods. Explain the theoretical justification for double-declining-balance and why, in the long run, the aggregate charge to depreciation will be the same under both methods.

(Depreciation—Strike, Units-of-Production, Obsolescence) The following are three different and unrelated situations involving depreciation accounting. Answer the question(s) at the end of each situation.

Situation I: Recently, Broderick Company experienced a strike that affected a number of its operating plants. The controller of this company indicated that it was not appropriate to report depreciation expense during this period because the equipment did not depreciate and an improper matching of costs and revenues would result. She based her position on the following points.

1. It is inappropriate to charge the period with costs for which there are no related revenues arising from production.

2. The basic factor of depreciation in this instance is wear and tear. Because equipment was idle, no wear and tear occurred.

Instructions

Comment on the appropriateness of the controller’s comments.

Situation II: Etheridge Company manufactures electrical appliances, most of which are used in homes. Company engineers have designed a new type of blender which, through the use of a few attachments, will perform more functions than any blender currently on the market. Demand for the new blender can be projected with reasonable probability. In order to make the blenders, Etheridge needs a specialized machine that is not available from outside sources. It has been decided to make such a machine in Etheridge’s own plant.

Instructions

  1. Discuss the effect of projected demand in units for the new blenders (which may be steady, decreasing, or increasing) on the determination of a depreciation method for the machine.
  2. What other matters should be considered in determining the depreciation method? (Ignore income tax considerations.)

Situation III: Haley Paper Company operates a 300-ton-per-day kraft pulp mill and four sawmills in Wisconsin. The company is in the process of expanding its pulp mill facilities to a capacity of 1,000 tons per day and plans to replace three of its older, less efficient sawmills with an expanded facility. One of the mills to be replaced did not operate for most of 2017 (current year), and there are no plans to reopen it before the new sawmill facility becomes operational.

In reviewing the depreciation rates and discussing the salvage values of the sawmills that were to be replaced, it was noted that if present depreciation rates were not adjusted, substantial amounts of plant costs on these three mills would not be depreciated by the time the new mill came on stream.

Instructions

What is the proper accounting for the four sawmills at the end of 2017?

(Depreciation Computations—Four Methods) Robert Parish Corporation purchased a new machine for its assembly process on August 1, 2017. The cost of this machine was \(117,900. The company estimated that the machine would have a salvage value of \)12,900 at the end of its service life. Its life is estimated at 5 years, and its working hours are estimated at 21,000 hours. Year-end is December 31.

Instructions

Compute the depreciation expense under the following methods. Each of the following should be considered unrelated.

  1. Straight-line depreciation for 2017.
  2. Activity method for 2017, assuming that machine usage was 800 hours.
  3. Sum-of-the-years’-digits for 2018.
  4. Double-declining balance for 2018.

Silverman Company purchased machinery for \(162,000 on January 1, 2017. It is estimated that the machinery will have a useful life of 20 years, salvage value of \)15,000, production of 84,000 units, and working hours of 42,000. During 2017, the company uses the machinery for 14,300 hours, and the machinery produces 20,000 units. Compute depreciation under the straight-line, units-of-output, working hours, sum-of-the-years’-digits, and double-declining-balance methods.

(Depletion and Depreciation—Mining) Khamsah Mining Company has purchased a tract of mineral land for \(900,000. It is estimated that this tract will yield 120,000 tons of ore with sufficient mineral content to make mining and processing profitable. It is further estimated that 6,000 tons of ore will be mined the first and last year and 12,000 tons every year in between. (Assume 11 years of mining operations.) The land will have a salvage value of \)30,000.

The company builds necessary structures and sheds on the site at a cost of \(36,000. It is estimated that these structures can serve 15 years but, because they must be dismantled if they are to be moved, they have no salvage value. The company does not intend to use the buildings elsewhere. Mining machinery installed at the mine was purchased secondhand at a cost of \)60,000. This machinery cost the former owner $150,000 and was 50% depreciated when purchased. Khamsah Mining estimates that about half of this machinery will still be useful when the present mineral resources have been exhausted, but that dismantling and removal costs will just about offset its value at that time. The company does not intend to use the machinery elsewhere. The remaining machinery will last until about one-half the present estimated mineral ore has been removed and will then be worthless. Cost is to be allocated equally between these two classes of machinery.

Instructions

  1. As chief accountant for the company, you are to prepare a schedule showing estimated depletion and depreciation costs for each year of the expected life of the mine.
  2. Also compute the depreciation and depletion for the first year assuming actual production of 5,000 tons. Nothing occurred during the year to cause the company engineers to change their estimates of either the mineral resources or the life of the structures and equipment.
See all solutions

Recommended explanations on Business Studies Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free