A bag of potato chips is packed and sealed in Los Angeles, California, and then shipped to Lake Tahoe, Nevada, during ski season. It is noticed that the volume of the bag of potato chips has increased upon its arrival in Lake Tahoe. What external conditions would most likely cause the volume increase?

Short Answer

Expert verified
The most likely external condition causing the volume increase in the bag of potato chips is the difference in altitude and consequent air pressure between Los Angeles and Lake Tahoe. Lower air pressure at higher altitudes, such as in Lake Tahoe, causes the gas inside the sealed container to expand, leading to a noticeable increase in volume.

Step by step solution

01

Analyze changes in temperature

Temperature can affect the volume of gases inside a sealed container. Typically, when the temperature of a gas increases, its volume also increases. We should compare the average temperatures in Los Angeles and Lake Tahoe to see if there is a significant difference that could have caused the volume increase.
02

Analyze changes in altitude

Altitude can affect air pressure, which in turn can affect the volume of gases in a sealed container. As we move higher in altitude, the air pressure decreases. Lake Tahoe is at a higher altitude than Los Angeles, so there should be a lower air pressure in Lake Tahoe.
03

Analyze changes in air pressure

Air pressure changes can directly affect the volume of a gas inside a sealed container. When external air pressure decreases, the gas inside the container will expand until it equalizes with the external pressure. We can consider the difference in air pressure between the two locations to determine if it's a likely cause for the volume increase.
04

Identifying the most likely cause

Based on our analysis, it's likely that the difference in altitude and consequent air pressure are the main external factors contributing to the increase in the volume of the bag of potato chips. Lower air pressure at higher altitudes causes the gas inside the sealed container to expand, leading to a noticeable increase in volume.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Draw a qualitative graph to show how the first property varies with the second in each of the following (assume 1 mole of an ideal gas and \(T\) in kelvin). a. \(P V\) versus \(V\) with constant \(T\) b. \(P\) versus \(T\) with constant \(V\) c. \(T\) versus \(V\) with constant \(P\) d. \(P\) versus \(V\) with constant \(T\) e. \(P\) versus \(1 / V\) with constant \(T\) f. \(P V / T\) versus \(P\)

A \(15.0-\mathrm{L}\) tank is filled with \(\mathrm{H}_{2}\) to a pressure of \(2.00 \times 10^{2}\) atm. How many balloons (each \(2.00 \mathrm{L}\) ) can be inflated to a pressure of 1.00 atm from the tank? Assume that there is no temperature change and that the tank cannot be emptied below \(1.00\) atm pressure.

Some very effective rocket fuels are composed of lightweight liquids. The fuel composed of dimethylhydrazine \(\left[\left(\mathrm{CH}_{3}\right)_{2} \mathrm{N}_{2} \mathrm{H}_{2}\right]\) mixed with dinitrogen tetroxide was used to power the Lunar Lander in its missions to the moon. The two components react according to the following equation: $$\left(\mathrm{CH}_{3}\right)_{2} \mathrm{N}_{2} \mathrm{H}_{2}(l)+2 \mathrm{N}_{2} \mathrm{O}_{4}(l) \longrightarrow 3 \mathrm{N}_{2}(g)+4 \mathrm{H}_{2} \mathrm{O}(g)+2 \mathrm{CO}_{2}(g)$$ If 150 g dimethylhydrazine reacts with excess dinitrogen tetroxide and the product gases are collected at \(127^{\circ} \mathrm{C}\) in an evacuated \(250-\mathrm{L}\) tank, what is the partial pressure of nitrogen gas produced and what is the total pressure in the tank assuming the reaction has \(100 \%\) yield?

Xenon and fluorine will react to form binary compounds when a mixture of these two gases is heated to \(400^{\circ} \mathrm{C}\) in a nickel reaction vessel. A \(100.0\) -\(\mathrm{mL}\) nickel container is filled with xenon and fluorine, giving partial pressures of \(1.24\) atm and \(10.10\) atm, respectively, at a temperature of \(25^{\circ} \mathrm{C}\). The reaction vessel is heated to \(400^{\circ} \mathrm{C}\) to cause a reaction to occur and then cooled to a temperature at which \(\mathrm{F}_{2}\) is a gas and the xenon fluoride compound produced is a nonvolatile solid. The remaining \(\mathrm{F}_{2}\) gas is transferred to another A \(100.0\) -\(\mathrm{mL}\) nickel container, where the pressure of \(\mathrm{F}_{2}\) at \(25^{\circ} \mathrm{C}\) is \(7.62\) atm. Assuming all of the xenon has reacted, what is the formula of the product?

A compound contains only \(\mathrm{C}, \mathrm{H},\) and \(\mathrm{N}\). It is \(58.51 \%\) C and \(7.37 \%\) H by mass. Helium effuses through a porous frit \(3.20\) times as fast as the compound does. Determine the empirical and molecular formulas of this compound.

See all solutions

Recommended explanations on Chemistry Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free