Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 9: Problem 24

Why is a burn from steam typically much more severe than a burn from boiling water?

Short Answer

Expert verified
A burn from steam is typically more severe than a burn from boiling water because steam carries more heat energy due to the absorbed latent heat during the phase change from water to steam. When steam comes into contact with our skin, it condenses back into water and releases this additional latent heat, transferring more heat energy to our skin than boiling water at the same temperature, resulting in a more severe burn.

Step by step solution

01

Consider the temperatures

Boiling water and steam both typically have the same temperature, around 100°C (212°F) at standard atmospheric pressure. However, if the steam is above boiling temperature (called superheated steam), it could cause more severe burns due to its higher temperature.
02

Understand heat transfer

When our skin comes into contact with boiling water or steam, a heat transfer occurs. Heat transfers from the hot substance (steam or boiling water) to our cooler skin. The greater the difference in temperature, the faster the heat transfer occurs and the more severe the burn.
03

Consider the energy involved

The crucial difference between boiling water and steam is the amount of energy they carry. When water turns into steam, it absorbs a large amount of energy called latent heat. This is the energy required for a substance to change its phase from liquid to gas without a change in temperature. As a result, steam carries significantly more heat energy compared to boiling water at the same temperature.
04

Steam releases additional energy upon contact

When steam at 100°C comes into contact with our skin, it condenses back into water while releasing the additional latent heat. This release of latent heat causes a larger amount of heat energy to be transferred to our skin compared to a burn from boiling water, resulting in a more severe burn. In conclusion, a burn from steam is typically more severe than a burn from boiling water due to the additional latent heat released when steam condenses back into water, transferring more heat energy to our skin than boiling water would at the same temperature.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

The second-order diffraction \((n=2)\) for a gold crystal is at an angle of \(22.20^{\circ}\) for \(\mathrm{X}\) rays of \(154 \mathrm{pm}\). What is the spacing between these crystal planes?

What type of solid will each of the following substances form? a. \(\mathrm{diamond}\) b. \(\mathrm{PH}_{3}\) c. \(\mathrm{H}_{2}\) d. \(\mathrm{Mg}\) e. \(\mathrm{KCl}\) f. quartz g. \(\mathrm{NH}_{4} \mathrm{NO}_{3}\) h. \(\mathrm{SF}_{2}\) i. \(\mathrm{Ar}\) j. \(\mathrm{Cu}\) k. \(\mathrm{C}_{6} \mathbf{H}_{12} \mathbf{O}_{6}\)

Selenium is a semiconductor used in photocopying machines. What type of semiconductor would be formed if a small amount of indium impurity is added to pure selenium?

Diethyl ether \(\left(\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{OCH}_{2} \mathrm{CH}_{3}\right)\) was one of the first chemicals used as an anesthetic. At \(34.6^{\circ} \mathrm{C},\) diethyl ether has a vapor pressure of \(760 .\) torr, and at \(17.9^{\circ} \mathrm{C},\) it has a vapor pressure of \(400 .\) torr. What is the \(\Delta H\) of vaporization for diethyl ether?

Superalloys have been made of nickel and aluminum. The alloy owes its strength to the formation of an ordered phase, called the gamma-prime phase, in which Al atoms are at the corners of a cubic unit cell and Ni atoms are at the face centers. What is the composition (relative numbers of atoms) for this phase of the nickel-aluminum superalloy?
See all solutions

Recommended explanations on Chemistry Textbooks

Chemistry Branches

Read Explanation

Kinetics

Read Explanation

Chemical Analysis

Read Explanation

Physical Chemistry

Read Explanation

Making Measurements

Read Explanation

Organic Chemistry

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free