Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 12: Problem 84

What molecular structural features cause high-density polyethylene to be denser than low-density polyethylene?

Short Answer

Expert verified
The key molecular structural features causing high-density polyethylene (HDPE) to be denser than low-density polyethylene (LDPE) are the differences in their polymer chain structures. HDPE has a linear molecular structure, resulting in closely packed and well-aligned polymer chains with strong intermolecular forces, leading to a higher density. In contrast, LDPE has a branched molecular structure, causing irregular packing and misaligned polymer chains with weaker intermolecular forces, resulting in a lower density.

Step by step solution

01

Understanding HDPE and LDPE Polymers

High-density polyethylene (HDPE) and low-density polyethylene (LDPE) are both thermoplastic polymers made from the monomer ethylene (C2H4). They have different densities due to the variations in their molecular structures, which is a result of the polymerization process. HDPE has a linear molecular structure, while LDPE has a branched molecular structure.
02

Linear Molecular Structure of HDPE

HDPE is produced using a low-pressure process and contains little to no branching in its molecular structure. This means that the polymer chains are closely packed and aligned, leading to stronger intermolecular forces and crystallinity. As a result, HDPE has a higher density compared to LDPE. The density of HDPE typically ranges between 0.941 to 0.965 g/cm³.
03

Branched Molecular Structure of LDPE

LDPE, on the other hand, is produced using a high-pressure process, which results in a highly branched molecular structure. The branching in LDPE leads to irregular packing and alignment of the polymer chains, causing weaker intermolecular forces and lower crystallinity. Consequently, LDPE has a lower density compared to HDPE. The density of LDPE typically ranges between 0.910 to 0.940 g/cm³.
04

Summary

The molecular structural features causing high-density polyethylene (HDPE) to be denser than low-density polyethylene (LDPE) lies in the differences in their polymer chain structures: 1. HDPE has a linear molecular structure, leading to closely packed and well-aligned polymer chains with strong intermolecular forces. This results in a higher density. 2. LDPE has a branched molecular structure, leading to irregular packing and misaligned polymer chains with weaker intermolecular forces. This results in a lower density.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

For each of the following pairs of semiconductors, which one will have the larger band gap: (a) CdS or CdTe, (b) GaN or InP, (c) GaAs or InAs?

Iridium crystallizes in a face-centered cubic unit cell that has an edge length of \(3.833 \AA\). (a) Calculate the atomic radius of an iridium atom. (b) Calculate the density of iridium metal.

What type of lattice-primitive cubic, body-centered cubic, or face-centered cubic-does each of the following structure types possess: (a) \(\mathrm{CsCl},(\mathbf{b}) \mathrm{Au},\) (c) \(\mathrm{NaCl}\) (d) Po, (e) \(\mathrm{ZnS?}\) ?

The coordination number for the \(\mathrm{Al}^{3+}\) ion is typically between four and six. Use the anion coordination number to determine the \(\mathrm{Al}^{3+}\) coordination number in the following compounds: (a) \(\mathrm{AlF}_{3}\) where the fluoride ions are two coordinate, (b) \(\mathrm{Al}_{2} \mathrm{O}_{3}\) where the oxygen ions are six coordinate, (c) AlN where the nitride ions are four coordinate.

Define the term alloy. Distinguish among solid solution alloys, heterogeneous alloys, and intermetallic compounds.
See all solutions

Recommended explanations on Chemistry Textbooks

Ionic and Molecular Compounds

Read Explanation

Physical Chemistry

Read Explanation

Making Measurements

Read Explanation

Inorganic Chemistry

Read Explanation

Chemical Reactions

Read Explanation

The Earths Atmosphere

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free