Chapter 1

Use the following information to answer questions 25-28. A voltaic cell is created using the following half-cells: \(\begin{array}{ll}{\mathrm{Cr}^{3+}+3 e \rightarrow \mathrm{Cr}(s)} & {E^{\circ}=-0.41 \mathrm{V}} \\ {\mathrm{Pb}^{2+}+2 e \rightarrow \mathrm{Pb}(s)} & {E^{\circ}=-0.12 \mathrm{V}}\end{array}\) The concentrations of the solutions in each half-cell are 1.0 M. Based on the given reduction potentials, which of the following would lead to a reaction? (A) Placing some \(\operatorname{Cr}(s)\) in a solution containing \(\mathrm{Pb}^{2+}\) ions (B) Placing some \(\mathrm{Pb}(s)\) in a solution containing \(\mathrm{Cr}^{3+}\) ions (C) Placing some \(\mathrm{Cr}(s)\) in a solution containing \(\mathrm{Cr}^{3+}\) ions (D) Placing some \(\mathrm{Pb}(s)\) in a solution containing \(\mathrm{Pb}^{2+}\) ions

Which gas exerts the greatest pressure? (A) He (B) Ne (C) NO (D) All gases exert the same amount of pressure.

Use the following information to answer questions 29-31. Pennies are made primarily of zinc, which is coated with a thin layer of copper through electroplating, using a setup like the one above. The solution in the beaker is a strong acid (which produces H' ions), and the cell is wired so that the copper electrode is the anode and zinc penny is the cathode. Use the following reduction potentials to answer questions \(29-31 .\) $$\begin{array}{|l|l|}\hline \text { Half-Reaction } & {\text { Standard Reduction Potential }} \\ \hline \mathrm{Cu}^{2++2 e^{-} \rightarrow \mathrm{Cu}(s)} & {+0.34 \mathrm{V}} \\ \hline 2 \mathrm{H}^{++2 e^{-} \rightarrow \mathrm{H}_{2}(g)} & {0.00 \mathrm{V}} \\ \hline \mathrm{Ni}^{2++2 e^{-} \rightarrow \mathrm{Ni}(s)} & {-0.25 \mathrm{V}} \\\ \hline \mathrm{Zn}^{2++2 e^{-} \rightarrow \mathrm{Zn}(s)} & {-0.76 \mathrm{V}} \\ \hline\end{array}$$ When the cell is connected, which of the following reactions takes place at the anode? (A) \(\mathrm{Cu}^{2+}+2 e^{-} \rightarrow \mathrm{Cu}(\mathrm{s})\) (B) \(\mathrm{Cu}(s) \rightarrow \mathrm{Cu}^{2+}+2 e^{-}\) (C) \(2 \mathrm{H}^{+}+2 e^{-} \rightarrow \mathrm{H}_{2}(g)\) (D) \(\mathrm{H}_{2}(g) \rightarrow 2 \mathrm{H}^{+}+2 e^{-}\)

Which compound, \(\mathrm{CaCl}_{2}\) or \(\mathrm{CaO}\) , would you expect to have a high melting point? Why? (A) \(\mathrm{CaCl}_{2}\) because there are more ions per lattice unit (B) \(\mathrm{CaCl}_{2}\) because a chlorine ion is smaller than an oxygen ion (C) Cao, because the charge of oxygen ion exceeds that of chlorine ion (D) CaO, because the common charges of calcium and oxygen ions are identical in magnitude

Which gas has the strongest IMFs? (A) He (B) Ne (C) NO (D) All gases have identical IMFs.

Even though it is a noble gas, xenon is known to form bonds with other elements. Which element from the options below would xenon most likely be able to bond with? (A) Lithium (B) Argon (C) Fluorine (D) Carbon

Use the following information to answer questions 29-31. Pennies are made primarily of zinc, which is coated with a thin layer of copper through electroplating, using a setup like the one above. The solution in the beaker is a strong acid (which produces H' ions), and the cell is wired so that the copper electrode is the anode and zinc penny is the cathode. Use the following reduction potentials to answer questions \(29-31 .\) $$\begin{array}{|l|l|}\hline \text { Half-Reaction } & {\text { Standard Reduction Potential }} \\ \hline \mathrm{Cu}^{2++2 e^{-} \rightarrow \mathrm{Cu}(s)} & {+0.34 \mathrm{V}} \\ \hline 2 \mathrm{H}^{++2 e^{-} \rightarrow \mathrm{H}_{2}(g)} & {0.00 \mathrm{V}} \\ \hline \mathrm{Ni}^{2++2 e^{-} \rightarrow \mathrm{Ni}(s)} & {-0.25 \mathrm{V}} \\\ \hline \mathrm{Zn}^{2++2 e^{-} \rightarrow \mathrm{Zn}(s)} & {-0.76 \mathrm{V}} \\ \hline\end{array}$$ What is the required voltage to make this cell function? (A) 0.34 V (B) 0.42 V (C) 0.76 V (D) 1.10 V

A sealed, rigid container contains three gases: 28.0 \(\mathrm{g}\) of nitrogen, 40.0 \(\mathrm{g}\) of argon, and 36.0 g of water vapor. If the total pressure exerted by the gases is \(2.0 \mathrm{atm},\) what is the partial pressure of the nitrogen? (A) 0.33 atm (B) 0.40 atm (C) 0.50 \(\mathrm{atm}\) (D) 2.0 \(\mathrm{atm}\)

Use the following information to answer questions 29-31. Pennies are made primarily of zinc, which is coated with a thin layer of copper through electroplating, using a setup like the one above. The solution in the beaker is a strong acid (which produces H' ions), and the cell is wired so that the copper electrode is the anode and zinc penny is the cathode. Use the following reduction potentials to answer questions \(29-31 .\) $$\begin{array}{|l|l|}\hline \text { Half-Reaction } & {\text { Standard Reduction Potential }} \\ \hline \mathrm{Cu}^{2++2 e^{-} \rightarrow \mathrm{Cu}(s)} & {+0.34 \mathrm{V}} \\ \hline 2 \mathrm{H}^{++2 e^{-} \rightarrow \mathrm{H}_{2}(g)} & {0.00 \mathrm{V}} \\ \hline \mathrm{Ni}^{2++2 e^{-} \rightarrow \mathrm{Ni}(s)} & {-0.25 \mathrm{V}} \\\ \hline \mathrm{Zn}^{2++2 e^{-} \rightarrow \mathrm{Zn}(s)} & {-0.76 \mathrm{V}} \\ \hline\end{array}$$ If, instead of copper, a nickel bar were to be used, could nickel be plated onto the zinc penny effectively? Why or why not? (A) Yes, nickel’s SRP is greater than that of zinc, which is all that is required for nickel to be reduced at the cathode (B) Yes, nickel is able to take electrons from the \(\mathrm{H}^{+}\) ions in solution, allowing it to be reduced (C) No, nickel's SRP is lower than that of \(\mathrm{H}^{+}\) ions, which means the only product being produced at the cathode would be hydrogen gas (D) No, nickel's SRP is negative, meaning it cannot be reduced in an electrolytic cell

Silver sulfate, \(\mathrm{Ag}_{2} \mathrm{SO}_{4}\) , has a solubility product constant of \(1.0 \times 10^{-5} .\) The below diagram shows the products of a precipitation reaction in which some silver sulfate was formed. (Diagram Can't Copy) Which ion concentrations below would have led the precipitate to form? (A) \(\left[\mathrm{Ag}^{+}\right]=0.01 M\left[\mathrm{SO}_{4}^{2-}\right]=0.01 M\) (B) \(\left[\mathrm{Ag}^{+}\right]=0.10 M\left[\mathrm{SO}_{4}^{2-}\right]=0.01 M\) (C) \(\left[\mathrm{Ag}^{+}\right]=0.01 M\left[\mathrm{SO}_{4}^{2-}\right]=0.10 M\) (D) This is impossible to determine without knowing the total volume of the solution.