Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 1: Problem 16

A sample of a hydrate of \(\mathrm{CuSO}_{4}\) with a mass of 250 grams was heated until all the water was removed. The sample was then weighed and found to have a mass of 160 grams. What is the formula for the hydrate? (A) \(\mathrm{CuSO}_{4} \cdot 10 \mathrm{H}_{2} \mathrm{O}\) (B) \(\mathrm{CuSO}_{4} \cdot \mathrm{TH}_{2} \mathrm{O}\) (C) \(\mathrm{CuSO}_{4} \cdot 5 \mathrm{H}_{2} \mathrm{O}\) (D) \(\mathrm{CuSO}_{4} \cdot 2 \mathrm{H}_{2} \mathrm{O}\)

Short Answer

Expert verified
The formula for the hydrate is \(\mathrm{CuSO}_{4} \cdot 5 \mathrm{H}_{2} \mathrm{O}\)

Step by step solution

01

Finding the Mass of Water

The first step is to find out how much water was in the original hydrate. This is done by subtracting the mass of the dehydrated sample from the original mass of the sample. So, Mass of water = 250g (original mass) - 160g (final mass) = 90g
02

Calculate the Moles of Water and \(\mathrm{CuSO}_{4}\)

Next, we convert the mass of water and \(\mathrm{CuSO}_{4}\) to moles. The molar mass of water is about 18g/mol and that of \(\mathrm{CuSO}_{4}\) is about 160g/mol. So, Moles of water = 90g / 18 g/mol = 5 mol and Moles of \(\mathrm{CuSO}_{4}\) = 160g / 160 g/mol = 1 mol.
03

Find the Ratio of \(\mathrm{CuSO}_{4}\) to \(\mathrm{H}_{2}\mathrm{O}\)

Now that we have the moles of water and \(\mathrm{CuSO}_{4}\), the next step it to find their ratio to know the formula of the hydrate. Since both the moles of \(\mathrm{CuSO}_{4}\) and \(\mathrm{H}_{2}\mathrm{O}\) are equal to 1:5, the formula for the hydrate is \(\mathrm{CuSO}_{4} \cdot 5 \mathrm{H}_{2} \mathrm{O}\)

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

1.50 g of \(\mathrm{NaNO}_{3}\) is dissolved into 25.0 \(\mathrm{mL}\) of water, causing the temperature to increase by \(2.2^{\circ} \mathrm{C}\) . The density of the final solution is found to be 1.02 \(\mathrm{g} / \mathrm{mL}\) . Which of the following expressions will correctly calculate the heat gained by the water as the NaNO, dissolves? Assume the volume of the solution remains unchanged. (A) \((25.0)(4.18)(2.2)\) (B) \(\frac{(26.5)(4.18)(2.2)}{1.02}\) (C) \(\frac{(1.02)(4.18)(2.2)}{1.50}\) (D) \((25.0)(1.02)(4.18)(2.2)\)

Which substance would have the highest boiling point? (A) Ethanol, because it is the most asymmetrical (B) Acetone, because of the double bond (C) Ethylene glycol, because it has the most hydrogen bonding (D) All three substances would have very similar boiling points because their molar masses are similar.

\(2 \mathrm{H}_{2}(g)+\mathrm{O}_{2}(g) \rightarrow 2 \mathrm{H}_{2} \mathrm{O}(g)\) Based on the information given in the table below, what is \(\Delta H^{\circ}\) for the above reaction? \(\begin{array}{cc}{\text { Bond }} & {\text { Average bond energy }(\mathrm{kJ} / \mathrm{mol})} \\ {\mathrm{H}-\mathrm{H}} & {500} \\\ {\mathrm{O}=\mathrm{O}} & {500} \\ {\mathrm{O}-\mathrm{H}} & {500}\end{array}\) (A) \(-2,000 \mathrm{kJ}\) (B) \(-500 \mathrm{kJ}\) (C) \(+1,000 \mathrm{kJ}\) (D) \(+2,000 \mathrm{kJ}\)

$2 \mathrm{ClF}(g)+\mathrm{O}_{2}(g) \leftrightarrow \mathrm{Cl}_{2} \mathrm{O}(g)+\mathrm{F}_{2} \mathrm{O}(g) \Delta H=167 \mathrm{kJ} / \mathrm{mol}_{\mathrm{rxn}}$ During the reaction above, the product yield can be increased by increasing the temperature of the reaction. Why is this effective? (A) The reaction is endothermic; therefore adding heat will shift it to the right. (B) Increasing the temperature increases the speed of the molecules, meaning there will be more collisions between them. (C) The reactants are less massive than the products, and an increase in temperature will cause their kinetic energy to increase more than that of the products. (D) The increase in temperature allows for a higher percentage of molecular collisions to occur with the proper orientation to create the product.

150 \(\mathrm{mL}\) of saturated \(\mathrm{SrF}_{2}\) solution is present in a 250 \(\mathrm{mL}\) beaker at room temperature. The molar solubility of \(\mathrm{SrF}_{2}\) at 298 \(\mathrm{K}\) is \(1.0 \times 10^{-3} \mathrm{M}\) . What are the concentrations of \(\mathrm{Sr}^{2+}\) and \(\mathrm{F}^{-}\) in the beaker? (A) \(\left[\mathrm{Sr}^{2+}\right]=1.0 \times 10^{-3} M\left[\mathrm{F}^{-}\right]=1.0 \times 10^{-3} M\) (B) \(\left[\mathrm{Sr}^{2+}\right]=1.0 \times 10^{-3} M\left[\mathrm{F}^{-}\right]=2.0 \times 10^{-3} M\) (C) \(\left[\mathrm{Sr}^{2+}\right]=2.0 \times 10^{-3} M\left[\mathrm{F}^{-}\right]=1.0 \times 10^{-3} M\) (D) \(\left[\mathrm{Sr}^{2+}\right]=2.0 \times 10^{-3} \mathrm{M}\left[\mathrm{F}^{-}\right]=2.0 \times 10^{-3} M\)
See all solutions

Recommended explanations on Chemistry Textbooks

Making Measurements

Read Explanation

Chemical Analysis

Read Explanation

Inorganic Chemistry

Read Explanation

Ionic and Molecular Compounds

Read Explanation

Organic Chemistry

Read Explanation

The Earths Atmosphere

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free