The above reaction is present at equilibrium in a beaker. A student stirs the mixture. What effect will this have on the reaction rates? (A) It will increase both the forward and reverse reaction rates. (B) It will increase the forward rate, but decrease the reverse rate. (C) It will have no effect on the forward rate, but decrease the reverse rate. (D) It will have no effect on either rate.

Short Answer

Expert verified
The correct answer is (A) It will increase both the forward and reverse reaction rates.

Step by step solution

01

- Understanding the Basic Equilibrium

In a chemical equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in no net change in the concentration of reactants and products.
02

- Analyzing the Effect of Stirring

Stirring a mixture increases the collisions between the molecules, accelerating both the forward and reverse reactions. According to Le Chatelier's principle, the system at equilibrium will adjust to minimize this disturbance.
03

- Determine the Final Effect

Therefore, stirring the mixture increases both the forward and reverse reaction rates, so the equilibrium is achieved faster but the concentrations of the reactants and products remain unaltered as they must conform to the equilibrium constant.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Use the following information to answer questions 29-31. Pennies are made primarily of zinc, which is coated with a thin layer of copper through electroplating, using a setup like the one above. The solution in the beaker is a strong acid (which produces H' ions), and the cell is wired so that the copper electrode is the anode and zinc penny is the cathode. Use the following reduction potentials to answer questions \(29-31 .\) $$\begin{array}{|l|l|}\hline \text { Half-Reaction } & {\text { Standard Reduction Potential }} \\ \hline \mathrm{Cu}^{2++2 e^{-} \rightarrow \mathrm{Cu}(s)} & {+0.34 \mathrm{V}} \\ \hline 2 \mathrm{H}^{++2 e^{-} \rightarrow \mathrm{H}_{2}(g)} & {0.00 \mathrm{V}} \\ \hline \mathrm{Ni}^{2++2 e^{-} \rightarrow \mathrm{Ni}(s)} & {-0.25 \mathrm{V}} \\\ \hline \mathrm{Zn}^{2++2 e^{-} \rightarrow \mathrm{Zn}(s)} & {-0.76 \mathrm{V}} \\ \hline\end{array}$$ What is the required voltage to make this cell function? (A) 0.34 V (B) 0.42 V (C) 0.76 V (D) 1.10 V

Questions 45-48 refer to the following. Inside a calorimeter, 100.0 \(\mathrm{mL}\) of 1.0 \(\mathrm{M}\) hydrocyanic acid (HCN), a weak acid, and 100.0 \(\mathrm{mL}\) of 0.50 \(\mathrm{M}\) sodium hydroxide are mixed. The temperature of the mixture rises from \(21.5^{\circ} \mathrm{C}\) to \(28.5^{\circ} \mathrm{C}\) . The specific heat of the mixture is approximately \(4.2 \mathrm{J} / \mathrm{g}^{\circ} \mathrm{C},\) and the density is identical to that of water. What is the approximate amount of heat released during the reaction? \(\begin{array}{ll}{\text { (A) }} & {1.5 \mathrm{kJ}} \\ {\text { (B) }} & {2.9 \mathrm{kJ}} \\ {\text { (C) }} & {5.9 \mathrm{kJ}} \\ {\text { (D) }} & {11.8 \mathrm{kJ}}\end{array}\)

Silver sulfate, \(\mathrm{Ag}_{2} \mathrm{SO}_{4}\) , has a solubility product constant of \(1.0 \times 10^{-5} .\) The below diagram shows the products of a precipitation reaction in which some silver sulfate was formed. (Diagram Can't Copy) Which ion concentrations below would have led the precipitate to form? (A) \(\left[\mathrm{Ag}^{+}\right]=0.01 M\left[\mathrm{SO}_{4}^{2-}\right]=0.01 M\) (B) \(\left[\mathrm{Ag}^{+}\right]=0.10 M\left[\mathrm{SO}_{4}^{2-}\right]=0.01 M\) (C) \(\left[\mathrm{Ag}^{+}\right]=0.01 M\left[\mathrm{SO}_{4}^{2-}\right]=0.10 M\) (D) This is impossible to determine without knowing the total volume of the solution.

For a reaction involving nitrogen monoxide inside a sealed flask, the value for the reaction quotient \((Q)\) was found to be \(1.1 \times 10^{2}\) at a given point. If, after this point, the amount of NO gas in the flask increased, which reaction is most likely taking place in the flask? (A) \(\operatorname{NOBr}(g) \rightarrow \operatorname{NO}(g)+1 / \operatorname{Br}_{2}(g) \quad K_{\mathrm{C}}=3.4 \times 10^{-2}\) (B) \(2 \mathrm{NOCl}(g) \mapsto 2 \mathrm{NO}(g)+\mathrm{Cl}_{2}(g) \quad K_{\mathrm{c}}=1.6 \times 10^{-5}\) (C) \(2 \mathrm{NO}(g)+2 \mathrm{H}_{2}(g) \rightarrow \mathrm{N}_{2}(g)+2 \mathrm{H}_{2} \mathrm{O}(g) \quad K_{\mathrm{c}}=4.0 \times 10^{6}\) (D) \(\mathrm{N}_{2}(g)+\mathrm{O}_{2}(g) \rightarrow 2 \mathrm{NO}(g) \quad K_{\mathrm{c}}=4.2 \times 10^{2}\)

Which gas has the strongest IMFs? (A) He (B) Ne (C) NO (D) All gases have identical IMFs.

See all solutions

Recommended explanations on Chemistry Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free