This problem can be worked with Equations 19-6 on a calculator or with the spreadsheet in Figure 19-4. Transferrin is the iron-transport protein found in blood. It has a molecular mass of 81 000 and carries twoFe3+ions. Desferrioxamine B is a chelator used to treat patients with iron overload (see the opening of Chapter 12). It has a molecular mass of about 650 and can bind oneFe3+Fe31. Desferrioxamine can take iron from many sites within the body and is excreted (with its iron) through the kidneys. Molar absorptivities of these compounds (saturated with iron) at two wavelengths are given in the table. Both compounds are colorless (no visible absorption) in the absence of iron.


(a) A solution of transferrin exhibits an absorbance of 0.463 at 470 nm in a 1.000-cm cell. Calculate the concentration of transferrin in milligrams per milliliter and the concentration of bound iron in micrograms per milliliter.

(b) After adding desferrioxamine (which dilutes the sample), the absorbance at 470 nm was 0.424, and the absorbance at 428 nm was 0.401. Calculate the fraction of iron in transferrin and the fraction in desferrioxamine. Remember that transferrin binds two iron atoms and desferrioxamine binds only one.

Short Answer

Expert verified

(a). The concentration of transferrin in milligrams 8.99mg/ml .

(b). The fraction of iron in transferrin and the fraction in desferrioxamine.26.3% .

Step by step solution

01

Calculate the concentration of transferrin:

C=Aeb

Consider,

A as absorbance,

e as molar absorptivity,

b as pathlength.

C=0.46341701000C=1.110×10-4C=8.99g/mL

The solution for concentration of transferrin in milligrams is8.99mg/ml.

02

Calculate the fraction of iron in transferrin and the fraction in desferrioxamine:

A2=εcbAt470nm:0.424=4170T+2290DAt428nm:0.401=3504T+2730D

T is the concentration of transferrin, T=7.30×10-5M

D is the concentration of desferrioxamine,D=5.22×10-5M

The equation for fraction of Iron in transferrin is

role="math" localid="1663646842734" 2T2T+D=73.7%

To calculate the fraction of Iron in desferrioxamine

100-73.7%=26.3%

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Iodine reacts with mesitylene to form a complex with an absorption maximum at 332 nm in CCl4 solution:

(b)Spectrophotometric data for this reaction are shown in the table.Because[mesitylene]tot>>[I2],we can say that [mesitylene][mesitylene]tot. Prepare a graph ofA/([mesitylene][I2]tot)versusA/[I2]totand find the equilibrium constant and molar absorptivity of the complex.

The protein bovine serum albumin can bind several molecules of the dye methyl orange. To measure the binding constant K for one dye molecule, solutions were prepared with a fixed concentration (x0)of dye and a larger, variable concentration of protein (P). The equilibrium is Reaction 19-18, with X 5 methyl

orange.

Experimental data are shown in cells A16-D20 in the spreadsheet on the next page. The authors report the increase in absorbanceAat 490 nm as P is added to X. X and PX absorb visible light, but P does not. Equilibrium expression 19-20 applies and [PX] is given by Equation 19-21. Before P is added, the absorbance is. The increase in absorbance when P is added is

The spreadsheet uses Solver to vary K and Ein cells B10:B11 to minimize the sum of squares of differences between observed and calculatedin solutions with different amounts of P. Cell E16 computes [PX] from Equation 19-21, which is Equation A on line 6 of the spreadsheet. Cells F16 and G16 find [X] and [P] from mass balances. Cell H16 computes ΔAcalc=ΔE[PX]which is Equation B on line 7.

To estimate a value of K in cell B10, suppose that 50% of X has reacted in row 20 of the spreadsheet. The total concentration of X is. If half is reacted, then[X]=[PX]=2.85μMand[P]=P0[PX]=40.42.85=37.55μMThe binding

constant is K=[PX]P][X])=[2.85μM]37.55μM][2.85μM])=2.7×104which we enter as our guess for K in cell B10. We estimatein cell B11 by supposing that 50% of X has reacted in row 20. In Equation B on line 7, ΔA=Δε[PX].The measured

value ofin row 20 is 0.0291 and we just estimated that. Therefore, our guess for localid="1668328314124" Δεin cellB11isΔε=ΔA/[PX]=(0.0291)(2.85μM)=1.0×104in cell B11 is

Your assignment is to write formulas in columns E through J of the spreadsheet to reproduce what is shown and to find values in cells E17:J20. Then use Solver to find K andin cells B10:B11 to minimizeΣAothsAcalc2in cell I21.

Scatchard plot for binding of estradiol to albumin. Data in the table come from a student experiment to measure the binding constant of the radioactively labeled hormone estradiol (X)to the protein, bovine serum albumin (P).Estradiol(7.5nM)was equilibrated with various concentrations of albumin for 30minat37°C.A small fraction of unbound estradiol was removed by solid phase microextraction (Section24-4) and measured by liquid scintillation counting. Albumin is present in large excess, so its concentration in any given solution is essentially equal to its initial concentration in that solution. Call the initial concentration of estradiol [X]0and the final concentration of unbound estradiol [X]. Then bound estradiol is[X]0[X]and the equilibrium constant is

X+PPXK=[PX][X][P]=[X]0-[X][X][P]

which you can rearrange to
localid="1663648487221" [X]0[X]=K[P]+1

A graph of [X]0/[X]versus [P]should be a straight line with a slope of K.The quotient [X]0/[X]is equal to the counts of radioactive estradiol extracted from a solution without albumin divided by the counts of estradiol extracted from a solution with estradiol. (b) What fraction of estradiol is bound to albumin at the first and last points?

The spreadsheet gives the productεbfor four pure compounds and a mixture at infrared wavelengths. Modify Figure 19-4 to solve four equations and find the concentration of each compound. You can treat the coefficient matrix as if it were molar absorptivity because the path length was constant (but unknown) for all measurements.

Infrared spectra are customarily recorded on a transmittance scale so that weak and strong bands can be displayed on the same scale. The region near 2000cm-1in the infrared spectra of compounds A and B is shown in the figure. Note that absorption corresponds to a downward peak on this scale. The spectra were recorded from a 0.0100M solution of each, in cells with 0.00500 - cm path lengths. A mixture of A and B in a 0.00500 - cm cell gave a transmittance 34.0 % of at2022cm and 383% at 1093 cm. Find the concentrations of A and B.

See all solutions

Recommended explanations on Chemistry Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free