Propagation of uncertainty. In an extremely accurate measurement of the Faraday constant, a pure silver anode was oxidized to Ag1 with a constant current of 0.2036390(60.0000004)A for18000.075(60.010s to give a mass loss of4.097900(60.0000003) g from the anode. Given that the atomic mass of Ag is 107.8682 (60.0002), find the value of the Faraday constant and its uncertainty.

Short Answer

Expert verified

The Faraday constant is 96500C and the uncertainty will be 96368±0.1369%.

Step by step solution

01

Define Faraday's Law of electrolysis

This problem is related to Faraday's Law of electrolysis, states as "mass of substance deposited or discharged is directly proportional to the electricity passed through the cell".

Mathematically given by, mQ

Relative uncertainty = ( absolute uncertainty ÷best estimate )×100%

02

Calculate the faraday’s Laws of electrolysis

According to faraday 1 Faraday (96500C) of current is required to deposit or discharge 1 Equivalent weight of the substance.

Given that

Atomic mass of Ag is 107.868, is also the equivalent weight of silver.

Determination of Faraday Constant

1F = charge on electron ×Avogadro number

1F=1.6×10-19C×6.023×1023=96368C

Therefore 1F = 96368C is the calculated value of the Faraday constant.

03

Calculate the relative uncertainty

Relative uncertainty = ( absolute uncertainty÷best estimate )×100%

So from the above:

Relative uncertainty =132×10096368=0.1369%

The value can therefore be quoted as role="math" localid="1654772237672" 96368C±0.1369%.is the uncertainty. And the Uncertainty value is

96368×0.1369100×132

And the real Faraday constant will be96368C±132=96500C

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Explain what is done in anodic stripping voltammetry. Why is stripping the most sensitive voltammetric technique?

(a) How does the amperometric glucose monitor in Figure 7-12 work? b) Why is a mediator advantageous in the glucose monitor? c) How does the coulometric glucose monitor in Figure 17-14 work? (d) Why does the signal in the amperometric measurement depend on the temperature of the blood sample, whereas the signal in coulometry is independent of temperature? Do you expect the signal to increase or decrease with increasing temperature in amperometry?

(e) Glucose(C6H12O6$,FM180.16)is present in normal human blood at a concentration near 1g/L How many microcoulombs are required for complete oxidation of glucose in 0.300μL of blood in a home glucose monitor if the concentration is 1.00g/L ?

Ions that react with Ag+can be determined electrogravimetrically by deposition on a silver working anode:

Ag(s)+X-AgX(s)+e-

(a) What will be the final mass of a silver anode used to electrolyze 75.00 mL of 0.02380 M KSCN if the initial mass of the anode is 12.4638 g?

(b) At what electrolysis voltage (versus S.C.E.) will AgBr(s) be deposited from 0.10M Br? (Consider negligible current flow, so that there is no ohmic potential, concentration polarization, or overpotential.)

(c) Is it theoretically possible to separate 99.99% of0.10M Klfrom0.10MKBr by controlled-potential electrolysis?

Chlorine has been used for decades to disinfect drinking water. An undesirable side effect of this treatment is reaction with organic impurities to create organochlorine compounds, some of which could be toxic. Monitoring total organic halide (designated TOX) is required for many water providers. A standard procedure for TOX is to pass water through activated charcoal, which adsorbs organic compounds. Then the charcoal is combusted to liberate hydrogen halides:

Organichalide(RX)o2/800°CCO2+H2O+HX

HX is absorbed into aqueous solution and measured by coulometric titration with a silver anode:

X-(aq)+Ag(s)AgX(s)+e-

When 1.00 L of drinking water was analyzed, a current of 4.23 mA was required for 387 s. A blank prepared by oxidizing charcoal required 6 s at 4.23 mA. Express the TOX of the drinking water as μmol halogen/L. If all halogen is chlorine, express the TOX as μgCI/L.

From the two standard additions of 50 pm Fe(III) in the figure, find the concentration of Fe(III) in the seawater. Estimate where the baseline should be drawn for each trace and measure the peak height from the baseline. Consider the volume to be constant for all three solutions.

See all solutions

Recommended explanations on Chemistry Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free