Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 22: Q15 P (page 600)

Explain what is meant by spectral, chemical, ionization, and isobaric interference.

Short Answer

Expert verified

When analyte signals collide with signals from other elements in the sample, then the spectral interference happens. When a component of the sample lowers the amount of analyte atomization, then the chemical interference happens. The loss of analyte atoms due to ionisation is referred to as ionisation interference. Isobaric interference is caused by the presence of equivalent mass isotopes of multiple elements.

Step by step solution

01

Define interference.

A substance other than the tested material that can be analysed by the chosen analytical method or can prevent the assayed material from being measured is referred to as an interference. Interferences lead to inaccurate analytical results.

02

Define spectral and chemical interference.

Spectral interference occurs when analyte signals collide with signals from other elements or molecules in the sample, as well as signals from the flame or furnace.

Chemical interference occurs when a component of the sample, through a chemical reaction, lowers the amount of analyte atomization.

03

Define ionization and isobaric interference.

The loss of analyte atoms due to ionisation is referred to as ionisation interference. The ionisation energy of Ba , for example, is smaller than the dissociation energy of BaO.

Isobaric interference is caused by the presence of equivalent mass isotopes of multiple elements in the sample solution.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Would the answers be different if m/z 5 500 were an ion with a mass

of 1 000 Da and z 5 2?

Chlorate (CIO-3), chlorite (CIO-2), bromate (BrO-3), and iodate (IO-3)can be measured in drinking water at the 1-ppb level with 1% precision by selected reaction monitoring. Chlorate and chlorite arise from CIO2used as a disinfectant. Bromate and iodate can be formed from Br-or I-when water is disinfected with ozone O3. For the highly selective measurement of chlorate, the negative ion selected by Q1 in Figure 22-33 is m/z 83 and the negative ion selected by Q3 is m/z 67. Explain how this measurement works and how it distinguishes CIO3-from CIO2-, BrO3-, andIO3-

Phytoplankton at the ocean surface maintain the fluidity of their cell membranes by altering their lipid (fat) composition when the temperature changes. When the ocean temperature is high, plankton synthesize relatively more 37:2 than 37:364O⏟37:2=C37H70O(CH2)11(CH2)5CH)13CH3

After they die, plankton sink to the ocean fl oor and end up buried insediment. The deeper we sample a sediment, the further back into time we delve. By measuring the relative quantities of cell-membrane compounds at different depths in the sediment, we can infer the temperature of the ocean long ago. The molecular ion regions of the chemical ionization mass spectra of 37:2 and 37:3 are listed in the table. Predict the expected intensities of M, M11, and M12 for each of the four species listed. Include contributions from C, H, O, and N, as appropriate. Compare your predictions with the observed values. Discrepant intensities in these data are typical unless care is taken to obtain high-quality data.

30: (a)The mean free pathis the average distance a molecule travels before colliding with another molecule. The mean free path, l, is given by l 5 kT/(12sP), where kis Boltzmann’s constant, Tis temperature (K), Pis pressure (Pa), and s is the collision cross section. For a molecule with a diameter d, the collision cross section is pd2. The collision cross section is the area swept out by the molecule within which it will strike any other molecule it encounters. The magnetic sector mass spectrometer is maintained at a pressure of |1025 Pa so that ions do not collide with (and deflect) one another as they travel through the mass

analyzer. What is the mean free path of a molecule with a diameter of 1 nm at 300 K in the mass analyzer?

(b)The vacuum in an orbital mass separator is 1028 Pa. Find the mean free path in the orbital for the same conditions as (a).

What is selected reaction monitoring? Why is it also called MS/MS? Why does it improve the signal-to-noise ratio for a particular analyte?
See all solutions

Recommended explanations on Chemistry Textbooks

Making Measurements

Read Explanation

The Earths Atmosphere

Read Explanation

Chemistry Branches

Read Explanation

Ionic and Molecular Compounds

Read Explanation

Physical Chemistry

Read Explanation

Kinetics

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free