Explain what is meant by spectral, chemical, ionization, and isobaric interference.

Short Answer

Expert verified

When analyte signals collide with signals from other elements in the sample, then the spectral interference happens. When a component of the sample lowers the amount of analyte atomization, then the chemical interference happens. The loss of analyte atoms due to ionisation is referred to as ionisation interference. Isobaric interference is caused by the presence of equivalent mass isotopes of multiple elements.

Step by step solution

01

Define interference.

A substance other than the tested material that can be analysed by the chosen analytical method or can prevent the assayed material from being measured is referred to as an interference. Interferences lead to inaccurate analytical results.

02

Define spectral and chemical interference.

Spectral interference occurs when analyte signals collide with signals from other elements or molecules in the sample, as well as signals from the flame or furnace.

Chemical interference occurs when a component of the sample, through a chemical reaction, lowers the amount of analyte atomization.

03

Define ionization and isobaric interference.

The loss of analyte atoms due to ionisation is referred to as ionisation interference.

The ionisation energy of , for example, is smaller than the dissociation energy of BaO.

Isobaric interference is caused by the presence of equivalent mass isotopes of multiple elements in the sample solution.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

33:Why does vacuum ultraviolet photoionization with |120-nmwavelength radiation produce less molecular fragmentation than

does 70 eV electron ionization?

What resolving power is required to distinguishCH3CH2+fromHC=O+?

28: A limitation on how many spectra per second can be recorded by a time-of-flight mass spectrometer is the time it takes the slowest ions to go from the source to the detector. Suppose we want to scan up to m/z 500. Calculate the speed of this heaviest ion if it is accelerated through 5.00 kV in the source. How long would it take to drift 2.00 m through a spectrometer? At what frequency could you record spectra if a new extraction cycle were begun each time this heaviest ion reached the detector? What would be the frequency if you wanted to scan up to m/z 1000?

(a) Spectra A and B belong to isomers of C6H12O. Explain how you can tell which isomer goes with each spectrum.

(b) The intensity of theM + 1peak at m/z,101mustbe incorrect in both spectra. It is entirely missing in spectrum A and too intense (15.6% of intensity of M+* ) in spectrum B. What should be the intensity of M + 1 relative to M+* for the compositionC6H12O?

Consider an element with two isotopes whose natural abundances are aand b(a+b=1). If there are n atoms of the element in a compound, the probability of finding each combination of isotopes is derived from the expansion of the binomial (a+b)n. For carbon, the abundances area=0.9893 are12C andb=0.0107for C13. The probability of finding 212C atoms in acetylene, HC = CH, is given by the first term of the expansion of (a+b)2=a2+2ab+b2. The value ofa2is(0.9893)2=0.9787, so the probability of finding $212C atoms in acetylene is 0.9787. The probability of finding C12+113C is 2ab=2(0.9893)(0.0107)=0.0212. The probability of finding role="math" localid="1663661299432" 213C is b2=(0.0107)2=0.000114. The molecular ion, by definition, contains 212Catoms. The M + 1 peak contains 112C+113C . The intensity of M + 1 relative to M+*will be (0.01212)/(0.9787)=0.0217. (We are ignoring H2 because its natural abundance is small.) in 1 ,2-dichlorobenzene. Draw a stick diagram of the distribution, like Figure 22 - 7.

See all solutions

Recommended explanations on Chemistry Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free