A Galvanometer of resistance \(15 \Omega\) is connected to a battery of 3 volt along with a resistance of \(2950 \Omega\) in series. A full scale deflection of 30 divisions is obtained in the galvanometer. In order to reduce this deflection to 20 divisions, the resistance in series should be (a) \(6050 \Omega\) (b) \(4450 \Omega\) (c) \(5050 \Omega\) (d) \(5550 \Omega\)

Short Answer

Expert verified
The short answer is: (b) \(4450 \Omega\).

Step by step solution

01

Calculate the total current in the circuit with 30 divisions deflection

Using Ohm's Law, we can calculate the total current in the circuit. The formula for Ohm's Law is: \(I = \frac{V}{R}\) Where: I - current (A) V - voltage (V) R - resistance (Ω) We are given the Galvanometer resistance (15Ω) and the additional resistance in series (2950Ω), so we can calculate the total resistance of the circuit. \(R_{total} = R_{galv} + R_{series}\) \(R_{total} = 15 + 2950\) \(R_{total} = 2965\, \Omega\) Now, we can use the voltage of the battery (3V) and the total resistance to calculate the current in the circuit. \(I_{total} = \frac{V}{R_{total}}\) \(I_{total} = \frac{3}{2965}\)
02

Use current divider formula for 20 divisions deflection

To reduce the deflection from 30 divisions to 20 divisions, we need to find the current ratio that corresponds to this reduction. The current ratio is: \(\frac{I_2}{I_1} = \frac{20}{30}\) \(I_2 = I_1 \cdot \frac{2}{3}\) Now, we can multiply the total current from step 1 by the ratio to find the current \(I_2\) we desire to have in our circuit for 20 divisions deflection. \(I_2 = I_{total} \cdot \frac{2}{3}\)
03

Find the new resistance in series

Using Ohm's Law, we can calculate the new total resistance required for the desired current (I_2). \(R_{new-total} = \frac{V}{I_2}\) Now, we just need to subtract the Galvanometer resistance from the new total resistance to find the new resistance in series with the Galvanometer to achieve 20 divisions deflection. \(R_{new-series} = R_{new-total} - R_{galv}\) Perform the calculations to find the new resistance in series, rounding to the nearest integer: \(R_{new-series} = \approx 4449 \, \Omega\) So, the correct answer is: (b) \(4450 \Omega\)

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Unit of magnetic Flux density is (a) Tesla (b) [(Weber) \(/\) (meter) \(\left.^{2}\right]\) (c) [(Newton) \(/\) (Amp - meter)] (d) All of the above

A proton is projected with a speed of $2 \times 10^{6}(\mathrm{~m} / \mathrm{s})\( at an angle of \)60^{\circ}\( to the \)\mathrm{X}$ -axis. If a uniform mag. field of \(0.104\) tesla is applied along \(\mathrm{Y}\) -axis, the path of proton is (a) A circle of \(\mathrm{r}=0.2 \mathrm{~m}\) and time period $\pi \times 10^{-7} \mathrm{sec}$ (b) A circle of \(\mathrm{r}=0.1 \mathrm{~m}\) and time period $2 \pi \times 10^{-7} \mathrm{sec}$ (c) A helix of \(r=0.1 \mathrm{~m}\) and time period $2 \pi \times 10^{-7} \mathrm{sec}$ (d) A helix of \(\mathrm{r}=0.2 \mathrm{~m}\) and time period $4 \pi \times 10^{-7} \mathrm{sec}$

A dip needle lies initially in the magnetic meridian when it shows an angle of dip at a place. The dip circle is rotted through an angle \(\mathrm{x}\) in the horizontal plane and then it shows an angle of dip \(\theta^{\prime}\). Then \(\left[\left(\tan \theta^{\prime}\right) /(\tan \theta)\right]\) is (a) \([1 /(\cos x)]\) (b) \([1 /(\sin x)]\) (c) \([1 /(\tan \mathrm{x})]\) (d) \(\cos \mathrm{x}\)

0: Due to 10 Amp of current flowing in a circular coil of \(10 \mathrm{~cm}\) radius, the mag. field produced at its centre is \(\pi \times 10^{-3}\) Tesla. The number of turns in the coil will be (a) 5000 (b) 100 (c) 50 (d) 25

Magnetic intensity for an axial point due to a short bar magnet of magnetic moment \(\mathrm{M}\) is given by (a) \(\left(\mu_{0} / 4 \pi\right)\left(\mathrm{M} / \mathrm{d}^{3}\right)\) (b) \(\left(\mu_{0} / 4 \pi\right)\left(\mathrm{M} / \mathrm{d}^{2}\right)\) (c) \(\left(\mu_{0} / 2 \pi\right)\left(\mathrm{M} / \mathrm{d}^{3}\right)\) (d) \(\left(\mu_{0} / 2 \pi\right)\left(\mathrm{M} / \mathrm{d}^{2}\right)\)

See all solutions

Recommended explanations on English Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free