In each of the following questions, Match column-I and column-II and select the correct match out of the four given choices.(B) Ammeter (Q) Moderate resistance (C) Voltmeter (R) High, Low or moderate resistance (D) Avometer (S) High resistance (a) $\mathrm{A} \rightarrow \mathrm{P} ; \mathrm{B} \rightarrow \mathrm{Q} ; \mathrm{C} \rightarrow \mathrm{R} ; \mathrm{D} \rightarrow \mathrm{S}$ (b) $\mathrm{A} \rightarrow \mathrm{P} ; \mathrm{B} \rightarrow \mathrm{Q} ; \mathrm{C} \rightarrow \mathrm{S} ; \mathrm{D} \rightarrow \mathrm{R}$ (c) $\mathrm{A} \rightarrow \mathrm{Q} ; \mathrm{B} \rightarrow \mathrm{P} ; \mathrm{C} \rightarrow \mathrm{R} ; \mathrm{D} \rightarrow \mathrm{S}$ (d) $\mathrm{A} \rightarrow \mathrm{Q} ; \mathrm{B} \rightarrow \mathrm{P} ; \mathrm{C} \rightarrow \mathrm{S} ; \mathrm{D} \rightarrow \mathrm{R}$

Short Answer

Expert verified
The short answer is: The correct match is \(A \rightarrow Q; B \rightarrow S; C \rightarrow R\), which corresponds to option (d).

Step by step solution

01

Identify the characteristics of Ammeter

: An ammeter is a device used to measure the electric current in a circuit. It has a moderate resistance to allow the current to flow through it.
02

Identify the characteristics of Voltmeter

: A voltmeter is a device used to measure the potential difference between two points in a circuit. It has a high resistance to minimize the current flow through it, thus ensuring accurate voltage measurements.
03

Identify the characteristics of Ammeter, Voltmeter, and Ohmmeter

: An Avometer is a combination of an ammeter, voltmeter, and ohmmeter. It can measure current, voltage, and resistance in a circuit. Depending on the application, it may have high, low, or moderate resistance.
04

Match the instruments with their characteristics

: From our analysis: - A(Ammeter) matches with Q(Moderate resistance) - B(Voltmeter) matches with S(High resistance) - C(Avometer) matches with R(High, Low, or moderate resistance) Therefore, the correct match is \(A \rightarrow Q; B \rightarrow S; C \rightarrow R\), which corresponds to option (d).

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A straight wire of length \(30 \mathrm{~cm}\) and mass 60 milligram lies in a direction \(30^{\circ}\) east of north. The earth's magnetic field at this site is horizontal and has a magnitude of \(0.8 \mathrm{G}\). What current must be passed through the wire so that it may float in air ? \(\left[\mathrm{g}=10\left(\mathrm{~m} / \mathrm{s}^{2}\right)\right]\) (a) \(10 \mathrm{Amp}\) (b) \(20 \mathrm{Amp}\) (c) \(40 \mathrm{Amp}\) (d) \(50 \mathrm{Amp}\)

Two similar coils are kept mutually perpendicular such that their centers co- inside. At the centre, find the ratio of the mag. field due to one coil and the resultant magnetic field by both coils, if the same current is flown. (a) \(1: \sqrt{2}\) (b) \(1: 2\) (c) \(2: 1\) (d) \(\sqrt{3}: 1\)

In each of the following questions, Match column-I and column-II and select the correct match out of the four given choices.\begin{tabular}{l|l} Column - I & Column - II \end{tabular} (A) Biot-savart's law (P) Direction of magnetic field induction (B) Right hand thumb rule (Q) Magnitude of magnetic field induction (C) Fleming's left hand rule (R) Direction of induced current (D) Fleming's right hand rule (S) Direction of force due to a mag. field (a) $\mathrm{A} \rightarrow \mathrm{Q} ; \mathrm{B} \rightarrow \mathrm{P} ; \mathrm{C} \rightarrow \mathrm{R} ; \mathrm{D} \rightarrow \mathrm{S}$ (b) $\mathrm{A} \rightarrow \mathrm{Q} ; \mathrm{B} \rightarrow \mathrm{P} ; \mathrm{C} \rightarrow \mathrm{S} ; \mathrm{D} \rightarrow \mathrm{R}$ (c) $\mathrm{A} \rightarrow \mathrm{P} ; \mathrm{B} \rightarrow \mathrm{Q} ; \mathrm{C} \rightarrow \mathrm{R} ; \mathrm{D} \rightarrow \mathrm{S}$ (d) $\mathrm{A} \rightarrow \mathrm{P}: \mathrm{B} \rightarrow \mathrm{Q}: \mathrm{C} \rightarrow \mathrm{S} ; \mathrm{D} \rightarrow \mathrm{R}$

A solenoid of \(1.5\) meter length and \(4 \mathrm{~cm}\) diameter possesses 10 turn per \(\mathrm{cm}\). A current of \(5 \mathrm{Amp}\) is flowing through it. The magnetic induction at axis inside the solenoid is (a) \(2 \pi \times 10^{-3} \mathrm{~T}\) (b) \(2 \pi \times 10^{-5} \mathrm{~T}\) (c) \(2 \pi \times 10^{-2} \mathrm{G}\) (d) \(2 \pi \times 10^{-5} \mathrm{G}\)

A domain in a ferromagnetic substance is in the form of a cube of side length \(1 \mu \mathrm{m}\). If it contains \(8 \times 10^{10}\) atoms and each atomic dipole has a dipole moment of \(9 \times 10^{-24} \mathrm{~A} \mathrm{~m}^{2}\) then magnetization of the domain is \(\mathrm{A} \mathrm{m}^{-1}\) a) \(7.2 \times 10^{5}\) (b) \(7.2 \times 10^{3}\) (c) \(7.2 \times 10^{5}\) (d) \(7.2 \times 10^{3}\)

See all solutions

Recommended explanations on English Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free