Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 19: Problem 2654

The load voltage is approximately constant when a zener diode is (A) Forward biased (B) Reverse biased (C) Operating in breakdown region (D) Unbiased

Short Answer

Expert verified
The load voltage is approximately constant when a Zener diode is operating in the breakdown region (Choice C). This is because in this state, the Zener diode regulates the voltage across it by allowing excess current to flow in the reverse direction, thereby maintaining the voltage across its terminals nearly constant.

Step by step solution

01

Understand Zener Diode Characteristics

A Zener diode is a type of diode designed to allow the flow of current in the reverse direction when a certain reverse-biased voltage (called the Zener voltage) is reached. It is used for voltage regulation in electronic circuits, maintaining a constant voltage across its terminals even with changes in current.
02

Forward biased Zener Diode

When a Zener diode is forward biased (Choice A), it behaves like a regular diode, allowing current to flow in the forward direction. However, it does not maintain a constant load voltage in this condition because it does not utilize the Zener breakdown effect, which is the characteristic responsible for voltage regulation.
03

Reverse biased Zener Diode

When a Zener diode is reverse biased (Choice B), it blocks current flow in the reverse direction until the applied reverse voltage reaches the Zener voltage (the breakdown voltage). At this point, the Zener diode conducts in the reverse direction, but it does not maintain a constant load voltage since the Zener breakdown effect is not utilized in this condition.
04

Zener Diode Operating in Breakdown Region

When a Zener diode is operating in the breakdown region (Choice C), it maintains a constant voltage across its terminals, known as the Zener voltage. This is the desired condition for maintaining constant load voltage. In this region, the Zener diode regulates the voltage across it by allowing excess current to flow in the reverse direction and keeping the voltage across its terminals nearly constant.
05

Unbiased Zener Diode

When a Zener diode is unbiased (Choice D), neither forward nor reverse voltage is applied across its terminals. In this condition, the diode does not conduct current and does not maintain a constant load voltage. #Conclusion# Among the given options, the load voltage remains approximately constant when a Zener diode is \(operating\) \(in\) \(breakdown\) \(region\) (Choice C).

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A light emitting diode has a voltage drop of \(2 \mathrm{~V}\) across it when \(10 \mathrm{~mA}\) current is passed. If this \(\mathrm{LED}\) is to be operated with \(6 \mathrm{~V}\) battery the value of limiting resistor would be (A) \(400 \Omega\) (B) \(4000 \Omega\) (C) \(40 \mathrm{k} \Omega\) (D) \(300 \Omega\)

When NPN transistor is used as an amplifier then (A) electron moves from base to collector (B) hole travels from emitter to base (C) hole goes to emitter from base (D) electron goes to base from collector

For \(\mathrm{p}-\mathrm{n}\) junction, which statement is incorrect (A) Donor atoms are depleted of their holes in junction (B) No net charge exists far from junction (C) Barrier potential \(\mathrm{V}_{\mathrm{B}}\) is generated (D) Energy \(\mathrm{V}_{\mathrm{B}}\) is to be surmounted before any charge can flow across junction

Ripples are (A) A.C. mixed with D.C (B) D.C. mixed with output (C) D.C. output (D) A.C. output

The output current versus time curve of a rectifier is shown in the figure. The average value of the output-current is (A) 0 (B) \(\left(\mathrm{I}_{0} / 2\right)\) (C) \(\left(2 \mathrm{I}_{0} / \pi\right)\) (D) I \(_{0}\)
See all solutions

Recommended explanations on English Textbooks

Multiple Choice Questions

Read Explanation

International English

Read Explanation

Lexis and Semantics

Read Explanation

Phonetics

Read Explanation

Rhetoric

Read Explanation

Discourse

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free