Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 20: Problem 2729

In satellite communication \(6 \mathrm{GHz}\) frequency is used for and $4 \mathrm{GHz}$ frequency is used for (A) uplink, down link (B) down link, up link (C) modulation, demodulation (D) demodulation, modulation

Short Answer

Expert verified
In satellite communication, the 6 GHz frequency is used for uplink (transmission of data from Earth to the satellite), while the 4 GHz frequency is used for downlink (transmission of data from the satellite back to Earth). This is to avoid interference and signal attenuation. So, the correct answer is \( (A) \) uplink, downlink.

Step by step solution

01

Define Uplink and Downlink

Uplink refers to the transmission of data from the Earth to the satellite, while downlink refers to the transmission of data from the satellite back to Earth. In satellite communication systems, different frequencies are used for these two processes to avoid interference.
02

Compare the given frequencies

We are given two frequencies, 6 GHz and 4 GHz. Typically, uplink uses higher frequencies, while downlink uses lower frequencies. This is because signal attenuation (loss of signal strength) is higher at lower frequencies, and as the Earth is larger than the satellite, it usually requires greater signal strength to transmit.
03

Match the frequencies to uplink and downlink

Based on the information above, we can match the 6 GHz frequency to uplink, due to its higher frequency, and the 4 GHz frequency to downlink, due to its lower frequency.
04

Identify the correct answer

Now that we have matched the frequencies with their respective uplinks and downlinks, we can identify the correct answer from the options provided: (A) uplink, downlink (B) downlink, uplink (C) modulation, demodulation (D) demodulation, modulation As we found in Step 3, 6 GHz is used for uplink and 4 GHz is used for downlink. Therefore, the correct answer is (A) uplink, downlink.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

The relation between the maximum electron density \(\mathrm{N}\) max and the critical frequency \(\mathrm{f}\) for the ionosphere can be given as (A) \(\left.f_{c}=\sqrt{(9 N}_{\max }\right)\) (B) \(\mathrm{f}_{\mathrm{c}}=\sqrt{9}\left(\mathrm{~N}_{\max }\right)\) (C) \(\left.f_{c}=9 \sqrt{(N}_{\max }\right)\) (D) None of these

For AM, value of modulation index should be always \((\mathrm{A})<1\) (B) \(=1\) (C) \(>1\) (D) 0

If a radio receiver amplifies all the signal frequencies equally well, it is said to have high (A) fidelity (B) distortion (C) sensibility (D) sensitivity

Type of communication Possible by Modem duplex is (A) Half duplex (B) Simplex (C) Double Duplex (D) Full duplex

Frequencies in the UHF range normally propagate by means of (A) ground waves (B) sky waves (C) surface waves (D) space waves
See all solutions

Recommended explanations on English Textbooks

Essay Prompts

Read Explanation

Pragmatics

Read Explanation

Text Comparison

Read Explanation

Morphology

Read Explanation

Linguistic Terms

Read Explanation

Single Paragraph Essay

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free