Log out Go to App
Go to App

Learning Materials

Features

Discover

Chapter 20: Problem 2740

What is the working principal of optical fiber? (A) Refraction (B) Total internal reflection (C) Dispersion (D) Scattering

Short Answer

Expert verified
The working principle of optical fiber is \( \textbf{(B) Total Internal Reflection} \). Total internal reflection occurs when a light wave traveling in a medium with a higher refractive index strikes the boundary with a medium of lower refractive index at an angle greater than the critical angle, causing the light wave to be completely reflected back into the higher refractive index medium. This enables the transmission of light signals over long distances with minimal signal loss.

Step by step solution

01

Understanding Optical Fiber

Optical fiber is a flexible, transparent fiber made of glass or plastic that can transmit light signals over long distances with minimal loss. These fibers are commonly used in telecommunications, internet services, and other data-oriented applications.
02

Discussing Refraction

Refraction is the change in direction of a light wave when it passes from one medium to another with different refractive indices. Although refraction plays a crucial role in the transmission of light through the fiber, it is not the main working principle behind optical fibers.
03

Discussing Total Internal Reflection

Total internal reflection occurs when a light wave traveling in a medium with a higher refractive index strikes the boundary with a medium of lower refractive index at an angle greater than the critical angle. This causes the light wave to be completely reflected back into the higher refractive index medium with no light escaping into the lower refractive index medium. This is the principle that allows optical fibers to transmit light signals over long distances with minimal loss.
04

Discussing Dispersion

Dispersion refers to the spreading of light signals as they travel through a medium due to different wavelengths traveling at different speeds. Dispersion can lead to signal distortion in optical fibers. Although dispersion is an important factor to consider and manage in fiber-optic systems, it is not the working principle of optical fibers.
05

Discussing Scattering

Scattering is the process by which light waves interact with particles in a medium and are reflected or deflected in various directions. Scattering can result in signal loss in optical fibers; however, it is not the working principle of optical fibers.
06

Identifying the Correct Answer

Based on the analysis of each option, the working principle of optical fiber is (B) Total Internal Reflection. This is because it enables the transmission of light signals over long distances with minimal signal loss.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Start your free trial

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In optical fiber communication, the APD semi conductor device is used (A) to convert radio signal into optical signal. (B) to obtain intensity modulated signal (C) to covert optical signal into electrical signal (D) to covert optical signal into radio signal.

For efficient transmission of a \(100 \mathrm{MHz}\) frequency wave, the minimum length of an antenna should be (A) \(3 \mathrm{~m}\) (B) \((3 / 4) \mathrm{m}\) (C) \(10 \mathrm{~m}\) (D) \(100 \mathrm{~m}\)

Which condition is to be satisfied in an AM detector circuit so that the signal corresponds to an envelope of the carrier wave ? (A) \(\mathrm{T}_{\mathrm{C}}<<\mathrm{RC}\) (B) \(\mathrm{T}_{\mathrm{c}}>\mathrm{RC}\) (C) \(F_{C}<

In modulation process radio signal is called (A) modulating wave (B) Carrier wave (C) modulated wave (D) transmitting wave

The rms value of electric field of light coming from sun is $720 \mathrm{~N} / \mathrm{c}$. The average total energy density of electromagnetic wave is (A) \(6.37 \times 10^{-9} \mathrm{~J} / \mathrm{m}^{3}\) (B) \(4.58 \times 10^{-6} \mathrm{~J} / \mathrm{m}^{3}\) (C) \(81.35 \times 10^{-12} \mathrm{~J} / \mathrm{m}^{3}\) (A) \(3.3 \times 10^{-3} \mathrm{~J} / \mathrm{m}^{3}\)
See all solutions

Recommended explanations on English Textbooks

English Language Study

Read Explanation

Multiple Choice Questions

Read Explanation

Synthesis Essay

Read Explanation

Blog

Read Explanation

Phonology

Read Explanation

Morphology

Read Explanation
View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free