Scallops, sampling, and the law. Interfaces (March–April 1995) presented the case of a ship that fishes for scallops off the coast of New England. In order to protect baby scallops from being harvested, the U.S. Fisheries and Wildlife Service requires that “the average meat per scallop weigh at least 136 of a pound.” The ship was accused of violating this weight standard. Author Arnold Barnett lays out the scenario:

The vessel arrived at a Massachusetts port with 11,000 bags of scallops, from which the harbormaster randomly selected 18 bags for weighing. From each such bag, his agents took a large scoopful of scallops; then, to estimate the bag’s average meat per scallop, they divided the total weight of meat in the scoopful by the number of scallops it contained. Based on the 18 [numbers] thus generated, the harbormaster estimated that each of the ship’s scallops possessed an average of 139 of a pound of meat (that is, they were about seven percent lighter than the minimum requirement). Viewing this outcome as conclusive evidence that the weight standard had been violated, federal authorities at once confiscated 95 percent of the catch (which they then sold at auction). The fishing voyage was thus transformed into a financial catastrophe for its participants. The actual scallop weight measurements for each of the 18 sampled bags are listed in the table below. For ease of exposition, Barnett expressed each number as a multiple of of a pound, the minimum permissible average weight per scallop. Consequently, numbers below 1 indicate individual bags that do not meet the standard. The ship’s owner filed a lawsuit against the federal government, declaring that his vessel had fully complied with the weight standard. A Boston law firm was hired to represent the owner in legal proceedings, and Barnett was retained by the firm to provide statistical litigation support and, if necessary, expert witness testimony.

0.93

0.88

0.85

0.91

0.91

0.84

0.90

0.98

0.88

0.89

0.98

0.87

0.91

0.92

0.99

1.14

1.06

0.93

  1. Recall that the harbormaster sampled only 18 of the ship’s 11,000 bags of scallops. One of the questions the lawyers asked Barnett was, “Can a reliable estimate of the mean weight of all the scallops be obtained from a sample of size 18?” Give your opinion on this issue.
  2. As stated in the article, the government’s decision rule is to confiscate a catch if the sample mean weight of the scallops is less than 136 of a pound. Do you see any flaws in this rule?
  3. Develop your own procedure for determining whether a ship is in violation of the minimum-weight restriction. Apply your rule to the data. Draw a conclusion about the ship in question.

Short Answer

Expert verified
  1. It may conclude that the sampled scallops do not reasonably represent the whole population.
  2. In this case, the measure of reliability is missing.
  3. In terms of original weights, the 95% confidence interval is given by 0.02511,0.02662. Because, the 95% confidence interval does not include136 of a pound and is less than the specified value, it can say that the ship is not fulfilled the government’s rule.

Step by step solution

01

Given information

In Interfaces, the cases involved a ship that fishes for scallops off the coast of New England. In order to protect baby scallops from being harvested, the fisheries require that “the average meat per scallop weight at least136 of a pound.”

02

Finding the estimate

a.

It is given that harbor master sampled only 18 of the ship’s 11,000 bags of scallops.

The proportion of scallops in the sample will be

p=1811000=0.00164

Since, the proportion of sampled scallops is very small (almost equivalent to zero). It may conclude that the sampled scallops do not reasonably represent the whole population.

03

Determining flaws in a rule

b.

It is stated in the article that the government’s decision rule is to confiscate a catch if the sample mean weight of the scallops is less than136 of a pound.

Here in this case, the measure of reliability is missing.

04

Applying the rule and concluding

c.

The actual scallop weights measurements for each of the 18 sampled bags are given by expressing each number as a multiple of 136of a pound and are given as follows:

0.93

0.88

0.85

0.91

0.91

0.84

0.90

0.98

0.88

0.89

0.98

0.87

0.91

0.92

0.99

1.14

1.06

0.93

The 95% confidence interval for the mean weight of scallops is defined as follows:

x¯±tα2,(n-1)×sn

Also, the sample means,

x¯=xii=1nn

Therefore,

x¯=xii=1n18=16.765218=0.9314

The sample standard deviation,

role="math" localid="1658315856500" s=i=1nxi-x¯2n-1

Therefore,

s=i=118xi-x¯218-1s=0.0968017s=0.07546

The critical value of t at n-1=18-1degrees of freedom, t0.052.17=2.11

Then, the 95% confidence interval is given by,

0.9314±2.110×0.07546180.9314±0.02720.9042,0.9586

In terms of original weights, the 95% confidence interval is given by 0.02511,0.02662.

Because, the 95% confidence interval does not include136 of a pound and is less than the specified value, it can say that the ship is not fulfilled the government’s rule.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Cybersecurity survey. Refer to the State of Cybersecurity (2015) survey of firms from around the world, Exercise 1.20 (p. 50). Recall that of the 766 firms that responded to the survey, 628 (or 82%) expect to experience a cyberattack (e.g., a Malware, hacking, or phishing attack) during the year. Estimate the probability of an expected cyberattack at a firm during the year with a 90% confidence interval. Explain how 90% is used as a measure of reliability for the interval.

Preventing the production of defective items. It costs more toproduce defective items—because they must be scrappedor reworked—than it does to produce non-defective items.This simple fact suggests that manufacturers shouldensurethe quality of their products by perfecting theirproduction processes rather than through inspection of finishedproducts (Out of the Crisis,Deming, 1986). In orderto better understand a particular metal-stamping process, the manufacturer wishes to estimate the mean length of itemsproduced by the process during the past 24 hours.

a. How many parts should be sampled in order to estimatethe population means to within .1 millimetre (mm)with 90% confidence? Previous studies of this machinehave indicated that the standard deviation of lengthsproduced by the stamping operation is about 2 mm.

b. Time permits the use of a sample size no larger than100. If a 90% confidence interval for is constructedusing n= 100, will it be wider or narrower than wouldhave been obtained using the sample size determined in

part a? Explain.

c. If management requires that μbe estimated to within.1 mm and that a sample size of no more than 100 beused, what is (approximately) the maximum confidencelevel that could be attained for a confidence interval

Does that meet management's specifications?

A random sample of 90 observations produced a mean x = 25.9 and a standard deviation s = 2.7.

a. Find an approximate 95% confidence interval for the population meanμ

b. Find an approximate 90% confidence interval forμ

c. Find an approximate 99% confidence interval forμ

Suppose you wish to estimate the mean of a normal population

using a 95% confidence interval, and you know from prior information thatσ21

a. To see the effect of the sample size on the width of the confidence interval, calculate the width of the confidence interval for n= 16, 25, 49, 100, and 400.

b. Plot the width as a function of sample size non graph paper. Connect the points by a smooth curve and note how the width decreases as nincreases.

Wear-out of used display panels. Refer to Exercise 4.126 (p. 270) and the study of the wear-out failure time of used colored display panels purchased by an outlet store. Recall that prior to acquisition, the panels had been used for about one-third of their expected lifetimes. The failure times (in years) for a sample of 50 used panels are reproduced in the table. An SPSS printout of the analysis is shown below.

a. Locate a 95% confidence interval for the true mean failure time of used colored display panels on the printout.

b. Give a practical interpretation of the interval, part a.

c. In the repeated sampling of the population of used colored display panels, where a 95% confidence interval for the mean failure time is computed for each sample, what proportion of all the confidence intervals generated will capture the true mean failure time?

See all solutions

Recommended explanations on Math Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free