When the sun is high in the sky, it delivers approximately 1000 watts of power to each square meter of earth's surface. The temperature of the surface of the sun is about 6000K, while that of the earth is about 300K.

(a) Estimate the entropy created in one year by the flow of solar heat onto a square meter of the earth.

(b) Suppose you plant grass on this square meter of earth. Some people might argue that the growth of the grass (or of any other living thing) violates the second law of thermodynamics, because disorderly nutrients are converted into an orderly life form. How would you respond?

Short Answer

Expert verified

(a) The change in entropy can be estimated to be 4.97×107JK-1.

(b) The growth of grass doesn't violate the second law of thermodynamics as the entropy produced to transmit the energy from the sun to earth (disordered) would be much higher when compared to the entropy produced by the biochemical reactions (ordered) in the grass.

Step by step solution

01

Part (a) Step 1: Given

Power delivered per square meter=Ps=1000W

Surface temperature of sun =Tsun=6000K

Surface temperature of earth Tearth=300K

Time period (day time)role="math" localid="1647243842287" =t=1year=12×3600×365s

02

Part (a) Step 2: Calculation

Amount of energy received by the earth per square meter can be calculated as:

Q=Ps×t

By substituting the values, we get,

Q=1000×(12×3600×365)Q=1.57×1010J

Now the changes in entropies can be calculated as:

For earth:

role="math" localid="1647244335644" ΔSearth=QTearth

By substituting the values, we get,

ΔSearth=1.57×1010300ΔSearth=5.23×107JK-1

For sun:

role="math" localid="1647244543097" ΔSsun=-QTsun

By substituting the values, we get,

ΔSsun=-1.57×10106000ΔSsun=-2.62×106JK-1

We know that the net entropy change can be calculated as:

ΔStotal=ΔSsun+ΔSearth

By substituting the calculated values, we get,

ΔStotal=5.23×107-2.62×106ΔStotal=4.97×107JK-1

03

Part (a) Step 3: Final answer

Hence, the total entropy change can be calculated as4.97×107JK-1.

04

Part (b) Step 1: Concept Introduction

Entropy is a measure of a system's randomness or disorder in general. The total entropy can't be reduced, but it can stay the same if the processes are reversible, according to the law of thermodynamics.

05

Part (b) Step 2: Explanation

The second rule of thermodynamics is not violated by growing grass. This is due to its ability to harness solar energy and transform disordered molecules in the soil into an organized life. However, in the event of a biological reaction, entropy would be substantially lower, and hence far lower than the entropy caused by transporting energy from the Sun to the Earth.

06

Part (b) Step 3: Final answer

The entropy produced by transmitting energy from the sun to earth (disordered) would be far more than the entropy produced by biological reactions (ordered) in the grass, hence the development of grass does not break the second law of thermodynamics.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In Problem 1.55 you used the virial theorem to estimate the heat capacity of a star. Starting with that result, calculate the entropy of a star, first in terms of its average temperature and then in terms of its total energy. Sketch the entropy as a function of energy, and comment on the shape of the graph.

Experimental measurements of the heat capacity of aluminum at low temperatures (below about 50K) can be fit to the formula

CV=aT+bT3

where CVis the heat capacity of one mole of aluminum, and the constants aand bare approximately a=0.00135J/K2and b=2.48×10-5J/K4. From this data, find a formula for the entropy of a mole of aluminum as a function of temperature. Evaluate your formula at T=1Kand at T=10K, expressing your answers both in conventional units (J/K)and as unitless numbers (dividing by Boltzmann's constant).

Use a computer to study the entropy, temperature, and heat capacity of an Einstein solid, as follows. Let the solid contain 50 oscillators (initially), and from 0 to 100 units of energy. Make a table, analogous to Table 3.2, in which each row represents a different value for the energy. Use separate columns for the energy, multiplicity, entropy, temperature, and heat capacity. To calculate the temperature, evaluate ΔU/ΔSfor two nearby rows in the table. (Recall that U=qϵfor some constant ϵ.) The heat capacity (ΔU/ΔT)can be computed in a similar way. The first few rows of the table should look something like this:

(In this table I have computed derivatives using a "centered-difference" approximation. For example, the temperature .28is computed as 2/(7.15-0).) Make a graph of entropy vs. energy and a graph of heat capacity vs. temperature. Then change the number of oscillators to 5000 (to "dilute" the system and look at lower temperatures), and again make a graph of heat capacity vs. temperature. Discuss your prediction for the heat capacity, and compare it to the data for lead, aluminum, and diamond shown in Figure 1.14. Estimate the numerical value of εin electron-volts, for each of those real solids.

Polymers, like rubber, are made of very long molecules, usually tangled up in a configuration that has lots of entropy. As a very crude model of a rubber band, consider a chain of N links, each of length (see Figure 3.17). Imagine that each link has only two possible states, pointing either left or right. The total length L of the rubber band is the net displacement from the beginning of the first link to the end of the last link.

(a) Find an expression for the entropy of this system in terms of N and NR, the number of links pointing to the right.
(b) Write down a formula for L in terms of N and NR.
(c) For a one-dimensional system such as this, the length L is analogous to the volume V of a three-dimensional system. Similarly, the pressure P is replaced by the tension force F. Taking F to be positive when the rubber band is pulling inward, write down and explain the appropriate thermodynamic identity for this system.
(d) Using the thermodynamic identity, you can now express the tension force F in terms of a partial derivative of the entropy. From this expression, compute the tension in terms of L, T, N, and .
(e) Show that when L << N, the tension force is directly proportional to L (Hooke's law).
(f) Discuss the dependence of the tension force on temperature. If you increase the temperature of a rubber band, does it tend to expand or contract? Does this behavior make sense?
(g) Suppose that you hold a relaxed rubber band in both hands and suddenly stretch it. Would you expect its temperature to increase or decrease? Explain. Test your prediction with a real rubber band (preferably a fairly heavy one with lots of stretch), using your lips or forehead as a thermometer. (Hint: The entropy you computed in part (a) is not the total entropy of the rubber band. There is additional entropy associated with the vibrational energy of the molecules; this entropy depends on U but is approximately independent of L.)

In Problem 2.32you computed the entropy of an ideal monatomic gas that lives in a two-dimensional universe. Take partial derivatives with respect to U,A, and N to determine the temperature, pressure, and chemical potential of this gas. (In two dimensions, pressure is defined as force per unit length.) Simplify your results as much as possible, and explain whether they make sense.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free