When discharging a capacitor, as discussed in conjunction with Figure 21.39, how long does it take for the voltage on the capacitor to reach zero? Is this a problem?

Short Answer

Expert verified

Infinite time, the small remaining charge can leak.

Step by step solution

01

Discharging a capacitor

The discharging of the capacitor is,

\({\rm{V = }}{{\rm{V}}_{\rm{0}}}{{\rm{e}}^{\frac{{{\rm{ - t}}}}{{{\rm{RC}}}}}}\)

Here,\({{\rm{V}}_{\rm{0}}}\)is the voltage across the capacitor when it is charged to the maximum,\({\rm{t}}\)is the time from the initiation of discharging,\({\rm{R}}\)is the resistance in the circuit, and\({\rm{C}}\)is the value of capacitance of the capacitor.

02

 Step 2: Explanation

The capacitor discharges as \({{\rm{e}}^{{\rm{ - t}}}}\), which means that it decays exponentially with time.

However, because it is asymptotic to the zero line on the charge axis, this variable never approaches zero.

This is a concern since a small amount of charge stays in the capacitor, which can lead to problems such as static leakage and other problems.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

To measure currents in Figure \({\rm{21}}{\rm{.49}}\), you would replace a wire between two points with an ammeter. Specify the points between which you would place an ammeter to measure the following: (a) the total current; (b) the current flowing through \({{\rm{R}}_{\rm{1}}}\); (c) through \({{\rm{R}}_{\rm{2}}}\) ; (d) through \({{\rm{R}}_{\rm{3}}}\) . Note that there may be more than one answer to each part.

Standard automobile batteries have six lead-acid cells in series, creating a total emf of 12.0 V. What is the emf of an individual lead-acid cell?

Using the exact exponential treatment, find how much time is required to charge an initially uncharged 100-pFcapacitor through alocalid="1656397542799" 75.0-resistor to90.0%of its final voltage.

Carbon-zinc dry cells (sometimes referred to as non-alkaline cells) have an emf of 1.54 V, and they are produced as single cells or in various combinations to form other voltages. (a) How many 1.54 V cells are needed to make the common 9 V battery used in many small electronic devices? (b) What is the actual emf of the approximately 9 V battery? (c) Discuss how internal resistance in the series connection of cells will affect the terminal voltage of this approximately 9 V battery.

The label on a portable radio recommends the use of rechargeable nickel-cadmium cells (nicads), although they have a 1.25-V emf while alkaline cells have a 1.58-V emf. The radio has a 3.20-Ω resistance.(a) Draw a circuit diagram of the radio and its batteries. Now, calculate the power delivered to the radio. (b) When using Nicad cells each having an internal resistance of 0.0400 Ω.(c) When using alkaline cells each having an internal resistance of 0.200 Ω.(d) Does this difference seem significant, considering that the radio’s effective resistance is lowered when its volume is turned up?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free