The heating coils in a hair dryer are \(0.800{\rm{ }}cm\) in diameter, have a combined length of \(1.00{\rm{ }}m\), and a total of \(400\) turns. (a) What is their total self-inductance assuming they act like a single solenoid? (b) How much energy is stored in them when \(6.00{\rm{ }}A\) flows? (c) What average emf opposes shutting them off if this is done in \(5.00{\rm{ }}ms\) (one-fourth of a cycle for \(50{\rm{ }}Hz\) AC)?

Short Answer

Expert verified

a. Their total self-inductance is\(31.25{\rm{ }}nH\).

b. The stored energy is\(562.5\;nJ\).

c. The induced emf is \(37.5\mu V\).

Step by step solution

01

Concept Introduction

A passive electrical component that dampens current variations is an inductor. Other names for inductors are coils and chokes. In electrical nomenclature, the letter\(L\)stands in for an inductor.

02

Information Given

  • Diameter of wire coil:\(0.800{\rm{ }}cm\)
  • Length of wire:\(1.00{\rm{ }}m\)
  • Number of turns in coil:\(400\)
  • The current value:\(6.00{\rm{ }}A\)
  • The time value:\(5.00{\rm{ }}ms\)
  • The frequency value: \(50{\rm{ }}Hz\)
03

Calculating Self-Inductance

a)

We need to be clear that we have a total length of\(S = 1\;m\)of wire with a diameter of\(d = 8\;mm\)coiled in\(N = 400\)turns. The entire length of the produced solenoid,\(I\), and its diameter,\(D\), must be determined. They are going to be

The inductance will be given by

\(\begin{align}{}S &= \frac{{{\mu _0}{N^2}\pi {D^2}}}{{4I}}\\ &= \frac{{{\mu _0}{N^2}\pi {S^2}}}{{4Nd{\pi ^2}{N^2}}}\\ &= \frac{{{\mu _0}{S^2}}}{{4\pi Nd}}\end{align}\)

Numerically, we will have

\(\begin{align}{}L &= \frac{{4\pi \times {{10}^{ - 7}} \times {1^2}}}{{4\pi \times 400 \times 0.008}}\\ &= 3.125 \times {10^{ - 8}}{\rm{ }}H\\ &= 31.25{\rm{ }}nH\end{align}\)

Therefore, the required solution is \(31.25{\rm{ }}nH\).

04

Calculating Stored Energy

b)

The stored energy will be

\(\begin{align}{}E &= \frac{{L{I^2}}}{2}\\ &= \frac{{3.125 \times {{10}^{ - 8}} \times {6^2}}}{2}\\ &= 5.625 \times {10^{ - 7}}\;J\end{align}\)

Therefore, the required solution is \(562.5\;nJ\)

05

Calculating Average EMF

c)

The induced emf will be given by

\(\begin{align}{}\varepsilon & = \frac{{L\Delta I}}{{\Delta t}}\\ &= \frac{{3.125 \times {{10}^{ - 8}} \times 6}}{{0.005}}\\ &= 3.75 \times {10^{ - 5}}\;V\end{align}\)

Therefore, the required solution is \(37.5\mu V\).

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

(a) A car generator turns at \({\rm{400 rpm}}\) when the engine is idling. Its\({\rm{300 - turn}}\), \({\rm{5}}{\rm{.00}}\)by \({\rm{8}}{\rm{.00 cm}}\) rectangular coil rotates in an adjustable magnetic field so that it can produce sufficient voltage even at low rpms. What is the field strength needed to produce a \({\rm{24}}{\rm{.0 V}}\) peak emf? (b) Discuss how this required field strength compares to those available in permanent and electromagnets.

A device is turned on and \({\rm{3}}{\rm{.00 A}}\) flows through it \({\rm{0}}{\rm{.100 ms}}\) later. What is the self-inductance of the device if an induced \({\rm{150 V}}\) emf opposes this?

Distances in space are often quoted in units of light years, the distance light travels in one year. (a) How many meters is a light year? (b) How many meters is it to Andromeda, the nearest large galaxy, given that it is2.0×106 light years away? (c) The most distant galaxy yet discovered is12.0×109 light years away. How far is this in meters?

This problem refers to the bicycle generator considered in the previous problem. It is driven by a \({\rm{1}}{\rm{.60 cm}}\) diameter wheel that rolls on the outside rim of the bicycle tire. (a) What is the velocity of the bicycle if the generator’s angular velocity is \({\rm{1875 rad/s}}\)? (b) What is the maximum emf of the generator when the bicycle moves at \({\rm{10}}{\rm{.0 m/s}}\), noting that it was \({\rm{18}}{\rm{.0 V}}\) under the original conditions? (c) If the sophisticated generator can vary its own magnetic field, what field strength will it need at \({\rm{5}}{\rm{.00 m/s}}\) to produce a \({\rm{9}}{\rm{.00 V}}\) maximum emf?

A \({\rm{25}}{\rm{.0 H}}\) inductor has \({\rm{100 A}}\) of current turned off in \({\rm{1}}{\rm{.00 ms}}{\rm{.}}\) (a) What voltage is induced to oppose this? (b) What is unreasonable about this result? (c) Which assumption or premise is responsible?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free