Two children push on opposite sides of a door during play. Both pushes horizontally and perpendicular to the door. One child push with a force of 17.5 N at a distance of 0.600 m from the hinges, and the second child pushes at a distance of 0.450 m. What force must the second child exert to keep the door from moving? Assume friction is negligible.

Short Answer

Expert verified

The force exerted by the second child is23.3N

Step by step solution

01

Force

A force is an external factor that can change the rest or motion of a body. It has a size and a general direction.

02

Calculation of the force

The torque by the first child is,

τ1=17.5×0.600=10.5N·m

The torque applied by the second child must be the same as the first child to keep the door from moving. The force by the second child is then,

F2=τ1r2=10.50.450=23.3N

Hence, the force is23.3N.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

InFigure 9.21, the cg of the pole held by the pole vaulter is \(2.00\;{\rm{m}}\)from the left hand, and the hands are \(0.700\;{\rm{m}}\) apart. Calculate the force exerted by (a) his right hand and (b) his left hand. (c) If each hand supports half the weight of the pole inFigure 9.19, show that the second condition for equilibrium(net\(\tau = 0\))is satisfied for a pivot other than the one located at the center of gravity of the pole. Explicitly show how you follow the steps in the Problem-Solving Strategy for static equilibrium described above.

What is the mechanical advantage of a nail puller—similar to the one shown inFigure\({\rm{9}}{\rm{.23}}\)—where you exert a force \({\rm{45}}\;{\rm{cm}}\)from the pivot and the nail is \({\rm{1}}{\rm{.8}}\;{\rm{cm}}\)on the other side? What minimum force must you exert to apply a force of \({\rm{1250}}\;{\rm{N}}\) to the nail?

A \({\rm{17}}{\rm{.0}}\;{\rm{m}}\)high and \({\rm{11}}{\rm{.0}}\;{\rm{m}}\)long wall under construction and its bracing are shown in Figure \({\rm{9}}{\rm{.32}}\). The wall is in stable equilibrium without the bracing but can pivot at its base. Calculate the force exerted by each of the 10 braces if a strong wind exerts a horizontal force of \({\rm{650}}\;{\rm{N}}\)on each square meter of the wall. Assume that the net force from the wind acts at a height halfway up the wall and that all braces exert equal forces parallel to their lengths. Neglect the thickness of the wall.

Question: Unlike most of the other muscles in our bodies, the masseter muscle in the jaw, as illustrated inFigure 9.44, is attached relatively far from the joint, enabling large forces to be exerted by the back teeth. (a) Using the information in the figure, calculate the force exerted by the lower teeth on the bullet. (b) Calculate the force on the joint.

What three factors affect the torque created by a force relative to a specific pivot point?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free