Two air-filled, parallel-plate capacitors are to be connected to a 10 V battery, first individually, then in series, and then in parallel. Inthose arrangements, the energy stored in the capacitors turns out tobe, listed least to greatest: 75μJ,100μJ ,300μJ , and400μJ . Of the two capacitors, what is the (a) smaller and (b) greater capacitance?

Short Answer

Expert verified
  1. The smaller capacitance is2μF
  2. The greater capacitance is 6μF

Step by step solution

01

The given data

  • Potential difference of the battery, V = 10 V
  • Capacitors are first connected in series, then in parallel.
  • Energy stored in the capacitors from least to greatest,U1=75μJU2=100μJrole="math" localid="1661341160485" U3=300μJU4=400μJ
02

Understanding the concept of the capacitance in series and parallel

When the capacitors C1and C2are connected in series, the equivalent capacitance is given as,

1Ceq=1C1+1C2

When the capacitors C1and C2 are connected in parallel, the equivalent capacitance is given as,

Ceq=C1+C2

Formulae:

The charge stored between the capacitor plates, q=CV …(i)

The energy stored within the capacitor plates, U=12CV2 …(ii)

03

(a) Calculation of the smallest capacitance

When the capacitors are connected in series, the equivalent capacitance is smaller than either one individually. In parallel, their equivalent capacitance is more than that of an individual capacitor. The energy stored is directly proportional to the capacitance. Hence, for parallel combinations, the energy stored is larger than the series combination.Thus, the middle two values quoted in the problem must correspond to the individual capacitors.

Using the required stored energy, we can get the smallest capacitance of the capacitor plates by using the smaller value of the middle two values and equation (ii) as follows:

C1=2U2V2=2×100μJ10V2=200μJ100V2=2μF

Hence, the value of the capacitance is 2μF.

04

(b) Calculation of the greatest capacitance

Similarly, greater value of the capacitance is found using the greater value of the capacitor of the two middle values in equation (ii) as follows:

C2=2U3V2=2×300μJ10V2=600μJ100V2=6μF

Hence, the value of the capacitance is 6μF.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

The two metal objects in Figure have net charges of +70pC and -7pC , which result in a 20 Vpotential difference between them. (a) What is the capacitance of the system? (b) If the charges are changed to+200 pCand -200 pCwhat does the capacitance become? (c) What does the potential difference become?

If an uncharged parallel-plate capacitor (capacitance C) is connected to a battery, one plate becomes negatively charged as electrons move to the plate face (area A). In Fig. 25-26, the depth dfrom which the electrons come in the plate in a particular capacitor is plotted against a range of values for the potential difference Vof the battery. The density of conduction electrons in the copper plates is 8.49×1028electrons/m3. The vertical scale is set by ds=1.00pmand the horizontal scale is set by vs=20.0VWhat is the ratio C/A?

As a safety engineer, you must evaluate the practice of storing flammable conducting liquids in non-conducting containers. The company supplying a certain liquid has been using a squat, cylindrical plastic container of radius r = 0.20 mand filling it to height h = 10 cmwhich is not the container’s full interior height (figure). Your investigation reveals that during handling at the company, the exterior surface of the container commonly acquires a negative charge density of magnitude2.0μC/m2(approximately uniform). Because the liquid is a conducting material, the charge on the container induces charge separation within the liquid. (a) How much negative charge is induced in the centre of the liquid’s bulk?(b)Assume the capacitance of the central portion of the liquid relative to ground is 35 pFWhat is the potential energy associated with the negative charge in that effective capacitor?(c) If a spark occurs between the ground and the central portion of the liquid (through the venting port),the potential energy can be fed into the spark. The minimum spark energy needed to ignite the liquid is 10 mJ. In this situation, can a spark ignite the liquid?

A parallel-plate capacitor has circular plates of 8.20 cmradius and 1.30 mmseparation. (a) Calculate the capacitance. (b) Find the charge for a potential difference of 120 V

In Fig. 25-34 the battery has potential difference V=9.0V,C2=3.0μF,C4=4.0μFand all the capacitors are initially uncharged. When switch S is closed, a total charge of12μCpasses through point aand a total charge of8.0μCpasses through point b. What are (a)C1and (b)C3?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free