You are to connect resistors R1and R2, withR1>R2, to a battery, first individually, then in series, and then in parallel. Rank those arrangements according to the amount of current through the battery, greatest first.

Short Answer

Expert verified

Parallel arrangement >>R2>R1> Series arrangement.

Step by step solution

01

Step 1: Given

R1>R2

02

Determining the concept

Use the equation of Ohm’s law. According to the Ohm’s law,I=VR, so if voltage is constant, then current through the battery is inversely proportional to resistance.

Formulae are as follow:

I=VR

Where, I is current, V is voltage, R is resistance.

03

Determining the rank of the current through the battery

For the parallel arrangement:

The equivalent resistance of parallel arrangement is less and given as follow:

1Req=1R1+1R2Req=R1+R2R1R2

So, I depends only onReqand for parallel arrangementReqmust be less thanR1andR2. So,

The current through the parallel arrangement is greatest.

For the series arrangement:

The equivalent resistance of series arrangement is more and given as follow:

Req=R1+R2

So, I depends only onReqand for series arrangementReqmust be more than R1andR2.

So, the current through the series arrangement is the least.

For the individual arrangements

R1>R2

AsR1is greater than R2. So, the current throughR2 is greater thanR1becauseI1R

So, the rank will be as follow:

Parallel arrangement >>R2>R1>Series arrangement.

Hence, the Parallel arrangement >>R2>R1>Series arrangement.

Therefore, rank the current through the battery as it depends on total resistance. For parallel resistance, the equivalent resistance is less, so, the current is more. And for series arrangement, the equivalent resistance is more, so, the current is less.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In Fig. 27-5a, find the potential difference acrossR2ifε=12V,R1=3.0Ω,R2=4.0ΩandR3=5.0Ω


(a) In Figure, what value must Rhave if the current in the circuit is to be 1.0 mA? Take2.0 V,3.0 V, and3.0 Ω. (b) What is the rate at which thermal energy appears in R?

Figure 27-79 shows three20.0 Ωresistors. Find the equivalent resistance between points (a), (b), and (c). (Hint: Imagine that a battery is connected between a given pair of points.)

Suppose that, while you are sitting in a chair, charge separation between your clothing and the chair puts you at a potential of 200 V, with the capacitance between you and the chair at 150 pF. When you stand up, the increased separation between your body and the chair decreases the capacitance to 10 pF. (a) What then is the potential of your body? That potential is reduced over time, as the charge on you drains through your body and shoes (you are a capacitor discharging through a resistance). Assume that the resistance along that route is 300GΩ. If you touch an electrical component while your potential is greater than 100V, you could ruin the component. (b) How long must you wait until your potential reaches the safe level of 100V?

If you wear a conducting wrist strap that is connected to ground, your potential does not increase as much when you stand up; you also discharge more rapidly because the resistance through the grounding connection is much less than through your body and shoes. (c) Suppose that when you stand up, your potential is 1400 Vand the chair-to-you capacitance is 10pF. What resistance in that wrist-strap grounding connection will allow you to discharge to100V in 0.30 s, which is less time than you would need to reach for, say, your computer?

In Fig. 27-84, R1=R2=2.0Ω,R3=4.0Ω ,R4=3.0Ω ,R5=1.0Ω , andR6=R7=R8=8.0Ω , and the ideal batteries have emfse1=16V ande2=8.0V .What are the

(a) size and

(b) direction (up or down) of current i1 and the

(c) size and

(d) direction of current i2? What is the energy transfer rate in

(e) battery 1and

(f) battery 2? Is energy being supplied or absorbed in

(g) battery 1 and

(h) battery 2?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free