Chapter 27: 5P (page 795)
A 5.0 A current is set up in a circuit for 6.0 min by a rechargeable battery with a 6.0 V emf. By how much is the chemical energy of the battery reduced?
Short Answer
The chemical energy of the battery reduced is
Chapter 27: 5P (page 795)
A 5.0 A current is set up in a circuit for 6.0 min by a rechargeable battery with a 6.0 V emf. By how much is the chemical energy of the battery reduced?
The chemical energy of the battery reduced is
All the tools & learning materials you need for study success - in one app.
Get started for freeThe following table gives the electric potential differenceacross the terminals of a battery as a function of currentbeing drawn from the battery.
(a) Write an equation that represents the relationship betweenand. Enter the data into your graphing calculator and perform a linear regression fit ofversus.From the parameters of the fit, find
(b) the battery’s emf and
(c) its internal resistance.
A simple ohmmeter is made by connecting a flashlight battery in series with a resistanceand an ammeter that reads from 0 to, as shown in Fig. 27-59. Resistanceis adjusted so that when the clip leads are shorted together, the meter deflects to its full-scale value of. What external resistance across the leads results in a deflection of (a) , (b) , and (c) of full scale? (d) If the ammeter has a resistance ofand the internal resistance of the battery is negligible, what is the value of?
A temperature-stable resistor is made by connecting a resistor made of silicon in series with one made of iron. If the required total resistance is in a wide temperature range aroundrole="math" localid="1662722083861" , what should be the resistance of the (a) silicon resistor and (b) iron resistor? (See Table 26-1)
The starting motor of a car is turning too slowly, and the mechanic has to decide whether to replace the motor, the cable, or the battery. The car’s manual says that the12Vbattery should have no more than internal resistance; the motor should have no more than resistance, and the cable no more than resistance. The mechanic turns on the motor and measures 11.4Vacross the battery, a 3.0Vcross the cable, and a current of 50A. Which part is defective?
A wire of resistance 5.0 Ω is connected to a battery whose emf is 2.0 V and whose internal resistance is 1.0 Ω. In 2.0 min, how much energy is (a) Transferred from chemical form in the battery, (b) Dissipated as thermal energy in the wire, and (c) Dissipated as thermal energy in the battery?
What do you think about this solution?
We value your feedback to improve our textbook solutions.