Question: In Fig. 27-72, the ideal batteries have emfs,ε1=20.0V,ε2=10.0Vandε3=5.0V,, and, and the resistances are each200Ω. What are the (a) size and (b) direction (left or right) of currenti1? (c) Does battery 1 supply or absorb energy, and (d) what is its power? (e) Does battery 2 supply or absorb energy, and (f) what is its power? (g) Does battery 3 supply or absorb energy, and (h) what is its power?

Short Answer

Expert verified
  • a)The size of the currenti1is 5.0 A .
  • b)The direction of the currenti1 is leftward.
  • c)Battery 1 supplies energy.
  • d)The power of battery 1 is 100 W.
  • e)Battery 2 supplies energy.
  • f)The power of battery 2 is 50 W .
  • g)Battery 3 supplies energy.
  • h)The power generated is 56.3 W.

Step by step solution

01

The given data

  • a)Emf of ideal battery 1,ε1=20.0V.
  • b)Emf of ideal battery 2,ε2=10.0V.
  • c)Emf of battery 3,ε3=5.0V.
  • d) The value of each resistance, R=2.0Ω..
02

Understanding the concept of current and power

given batteries is given by Kirchhoff’s voltage law. If an amount of current is passing through the positive terminal of the device, then the device is supplying power to an external circuit. If the current enters a device at its positive terminal, then that device is absorbing or being supplied with power.

Formulae:

The voltage equation using Ohm’s law,

V=IR (i)

The equivalent resistance for a series combination,

role="math" localid="1662655673583" Req=1nRI (ii)

The equivalent resistance for a parallel combination,

Req=1n1RI (iii)

Kirchhoff’s voltage law,

closedloopV=0 (iv)

The power of a battery,

P=IV (v)

Kirchhoff’s junction rule,

ln=lout (vi)

Here l is the current V is the voltage, and R is the resistance.

03

a) Calculation of the size of the current i1

First, the bottom parallel pair of resistances is reduced to one single resistance using equation (iii) as follows:
R'=R22R=R2=2.0Ω2=1.0Ω

Now, the equivalent resistance of the bottom resistors with the resistor in series on the left of the circuit can be given using equation (ii) as follows:

R''=R+R'=2.0Ω+1.0Ω=3.0Ω

It is clear from the figure that the current through the equivalent resistance is i1. Now, the loop rule is employed in a chosen path that includes R'' and all the batteries (proceeding clockwise.)

Thus, using equation (i) in the loop rule of equation (iv), the size of the current can be given as follows: (assuming i1goes leftward through R'')

localid="1662721497890" ε3-ε1-ε2-i1R''=05.0V+20.0V-10.0V-i1(3.0Ω)=0i1=15V3.0Ω=5.0A

Hence, the value of the current is 5.0 A.

04

b) Calculation of the direction of the current i1

Since the sign of the current in part (a) is positive, this implies that our assumption of the current being in a leftward direction is correct.

Hence, the direction of the current is leftwards.

05

c) Calculation to know whether battery 1 supply or absorb energy

Since the current through battery 1 (ε1=20.0V) is “forward”, battery 1 is supplying energy.

Hence, battery 1 supplies energy.

06

d) Calculation of the power of the battery 1

The rate of energy supplied by battery 1 is its power that is given using the given data in equation (v) as follows:


P = (5.0 A )( 20. 0 V)
= 100 W

Hence, the value of the power is 100 W .

07

e) Calculation to know whether battery 2 supply or absorb energy

Now, the equivalent resistance of the parallel pair of resistors attached with battery 2 can be given using equation (iii) as follows:

R'''=R22R=R2=2.0Ω2=1.0Ω

Now, the amount of current through equivalent resistance is given using equation (i) as follows:

j'=10.0V1.0Ω=10.0A,Downward

But for the current to be in the upward direction for battery 2, the current can be given using equation (vi) as:

i=i-i1=10.0A-5.0A=5.0Aupward

Hence, battery 2 supplies energy.

08

f) Calculation of the power of the battery 2

The rate of energy supplied by battery 2 is its power that is given using the given data in equation (v) as follows:

P=(5.0A)(10.0V)=50W

Hence, the value of the power is 50W .

09

g) Calculation to know whether battery 3 supply or absorb energy 

Now, the equivalent resistance of the pair of resistors attached with battery 3 can be given using equation (iii) as follows:

1R''''=1R+1R+12R=2+2+12R=5R2RR''''=2R5=2(2.0Ω)5=0.8Ω

Now, the amount of current through equivalent resistance is given using equation (i) as follows:

j''=5.0V0.8Ω=6.25A,Downward

But for the current to be in the upward direction for battery 3 using the junction rule of equation (vi), the current can be given as:

j'''=j''+j1=6.25A+5.0A=11.25Aupward

Hence, battery 3 supplies energy.

10

h) Calculation of the power of the battery 3

The rate of energy supplied by battery 1 is its power that is given using the given data in equation (v) as follows:

P=(11.25A)(5.0V)=56.25W56.3W

Hence, the value of the power is 56.3 W .

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Question: Slide flash. Figure indicates one reason no one should stand under a tree during a lightning storm. If lightning comes down the side of the tree, a portion can jump over to the person, especially if the current on the tree reaches a dry region on the bark and thereafter must travel through air to reach the ground. In the figure, part of the lightning jumps through distance in air and then travels through the person (who has negligible resistance relative to that of air). The rest of the current travels through air alongside the tree, for a distance h. Ifand the total current is, what is the current through the person?

In Fig. 27-8a, calculate the potential difference between a and c by considering a path that contains R, r1, andε1.

Question: (a) In Fig. 27-4a, show that the rate at which energy is dissipated in Ras thermal energy is a maximum when R =r. (b) Show that this maximum power is P=ε2/4r.

Question: Two resistors R1andR2 may be connected either in series or in parallel across an ideal battery with emf ε. We desire the rate of energy dissipation of the parallel combination to be five times that of the series combination. Iflocalid="1662972116950" R1=100Ω, what are the (a) smaller and (b) larger of the two values ofR2that result in that dissipation rate?

In Figure,ε1=3.00V,ε2=1.00V , R1=4.00Ω, R1=2.00Ω , R1=5.00Ω and both batteries are ideal. (a) What is the rate at which energy is dissipated in R1 ? (b) What is the rate at which energy is dissipated in R2? (c) What is the rate at which energy is dissipated in R3? (d) What is the power of battery 1? (e) What is the power of battery 2?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free