Visible light is incident perpendicularly on a diffraction grating of 200 rulings/mm. What are the (a) longest, (b) second longest, and (c) third longest wavelengths that can be associated with an intensity maximum at θ = 30.0°?

Short Answer

Expert verified

(a) The longest wavelength is 625 nm for the 4th order of maxima.

(b) The 2nd longest wavelength is 500 nm for the 5th order of maxima.

(c) The 3rd longest wavelength is 417 nm for the 6th order of maxima.

Step by step solution

01

Diffraction grating

A set of a large number of slits is called a diffraction grating to resolve the incident light into its component wavelengths. The diffractions at angles θfor N slits are given by

role="math" localid="1663059226081" dsinθ=mλform=0,1,2,...(maxima)

Where d is the width of the grating element, which is equal to role="math" localid="1663059212479" widthofgratingNumberofslits.

Here the number of slits per unit length is 200 rulings/mm. Therefore, the width of the grating element will be

role="math" localid="1663059196577" d=wN=1200rulings/mm=0.5×10-5m

02

Determine the wavelengths in each case.

For m=1, the wavelength of the intensity maxima atθ=30° is

λ1=dsinθ=0.5×10-5msin30°=0.25×10-5m=2500nm

For m=3, the wavelength of the intensity maxima atθ=30° is

λ3=dsinθm=0.5×10-5msin30°3=0.0833×10-5m=833nm

For m=4, the wavelength of the intensity maxima atθ=30° is

λ4=dsinθm=0.5×10-5msin30°4=0.0625×10-5m=625nm

For m=5, the wavelength of the intensity maxima atθ=30° is

λ5=dsinθm=0.5×10-5msin30°5=0.05×10-5m=500nm

For m=6, the wavelength of the intensity maxima atθ=30° is

λ6=dsinθm=0.5×10-5msin30°6=0.0417×10-5m=417nm

As the visible range is 400 nm to 700 nm, the order of maxima from 4 to 6 is considered. Hence the order of wavelengths of diffraction maxima is

λ4>λ5>λ6

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A circular obstacle produces the same diffraction pattern as a circular hole of the same diameter (except very near u 0).Airborne water drops are examples of such obstacles. When you see the Moon through suspended water drops, such as in a fog, you intercept the diffraction pattern from many drops. The composite of the central diffraction maxima of those drops forms a white region that surrounds the Moon and may obscure it. Figure 36-43 is a photograph in which the Moon is obscured. There are two faint, colored rings around the Moon (the larger one may be too faint to be seen in your copy of the photograph). The smaller ring is on the outer edge of the central maxima from the drops; the somewhat larger ring is on the outer edge of the smallest of the secondary maxima from the drops (see Fig. 36-10).The color is visible because the rings are adjacent to the diffraction minima (dark rings) in the patterns. (Colors in other parts of the pattern overlap too much to be visible.) (a) What is the color of these rings on the outer edges of the diffraction maxima? (b) The colored ring around the central maxima in Fig. 36-43 has an angular diameter that is 1.35 times the angular diameter of the Moon, which is 0.50°. Assume that the drops all have about the same diameter. Approximately what is that diameter?

For three experiments, Fig. 36-31 gives αversus angle θ in one-slit diffraction using light of wavelength 500 nm. Rank the experiments according to (a) the slit widths and (b) the total number of diffraction minima in the pattern, greatest first.

For the situation in Questions 9 and Fig. 1, if instead we increased the grating spacing, would (a) the half-widths of the lines and (b) the separation of the lines increase, decrease, or remain the same? (c) Would the lines shift to the right, shift to the left, or remain in place?


You are conducting a single slit diffraction experiment with a light of wavelength λ. What appears , on a distant viewing screen, at a point at which the top and bottom rays through the slit have a path length difference equal to (a) 5λand (b) 4.5λ?

Nuclear-pumped x-ray lasers are seen as a possible weapon to destroy ICBM booster rockets at ranges up to 2000 km. One limitation on such a device is the spreading of the beam due to diffraction, with resulting dilution of beam intensity. Consider such a laser operating at a wavelength of 1.40 nm. The element that emits light is the end of a wire with diameter 0.200 mm. (a) Calculate the diameter of the central beam at a target 2000 km away from the beam source. (b) What is the ratio of the beam intensity at the target to that at the end of the wire? (The laser is fired from space, so neglect any atmospheric absorption.)

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free