Figure 22-38ashows two charged particles fixed in place on an x-axis with separation L. The ratio q1/q2 of their charge magnitudes is . Figure 22-38bshows the xcomponentEnet,Xof their net electric field along the x-axis just to the right of particle 2. The x-axis scale is set by xs=30.0cm. (a) At what value ofx>0isEnet,x is maximum? (b) If particle 2 has charge -q2=-3e, what is the value of that maximum?

Short Answer

Expert verified
  1. The value of x at which Enet,Xis maximum is 34 cm
  2. The value of that maximum if particle 2 has a charge -3e is 2.2×10-8N/C

Step by step solution

01

The given data

  1. The two charged particles are on the x-axis with separation, L .
  2. The value of the ratio,q1q2=4
  3. The x-axis scale is set as:xs=30.0cm
  4. Particle 2 has a charge of-q2=-3e
02

Understanding the concept of electric field 

Using the concept of the electric field at a given point, we can get the value of an individual electric field by a charge. Again for the maximum value of the net field, we can differentiate the electric field equation for getting the value of x. Now, substituting the value of x, we can get the value of the required electric field.

Formulae:

The magnitude of the electric field, E=q4πε0R2R^ (1)

where R = The distance of field point from the charge, and q = charge of the particle

According to the superposition principle, the electric field at a point due to more than one charge,

E=i-1nEi=i-1nqi4πε0ri2r^i (2)

03

a) Calculation of the value of Enetx for  being maximum

For it to be possible for the net field to vanish at some x > 0, the two individual fields (caused by q1and q2) must point in opposite directions for x > 0. They are therefore oppositely charged considering their positions. Further, since the net field points more strongly leftward for the small positive x (where it is very close to q2), then we conclude that localid="1657282744540" q2is the negative-valued charge. Thus, q1is a positive-valued charge.

From the given ratio, we can now considered for getting a maximum electric field that

q1=4eandq2=e

Thus using equation (1), we can find the individual fields, and substituting this into equation (2), we can get the net electric as:

Enet=E1+E2=44πε0(L+x)2-e4πε0(x)2...................(3)

Setting Enet=0at (see graph) x = 20 cm , the graph immediately leads to To get the maximum value of the electric field, we can differentiate the above equation for x, and equating it to zero, we can get the value of x as:

ddx4e4πε0(L+x)2-e4πε0(x)2=0x=2323+1343+13Lx=1.70(20cm)x=34cm

Hence, the value of x is 34 cm

04

b) Calculation of that maximum electric field

Substituting the given values in equation (3), we can the maximum electric field for the charge of particle 2,as follows:

E=4e4πε0(L+x)-3e4πε0(x)2=9×109N.m2.C-2×1.6×10-19C4(0.34m+0.20m)2-3(0.20m)2=2.2×10-8N/C

Hence, the value of the electric field is 2.2×10-8N/C

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In Fig. 22-66, particle 1 (of charge +2.00pC), particle 2 (of charge2.00pC), and particle 3 (of charge+5.00pC) form an equilateral triangle of edge length a=9.50cm.

(a) Relative to the positive direction of the x-axisdetermines the direction of the force F3on particle 3 due to the other particles by sketchingelectric field lines of the other particles.

(b) Calculate the magnitude ofF3

Figure 22-23 shows two square arrays of charged particles. The squares, which are centered on point P, are misaligned. The particles are separated by either dor d/2 along the perimeters of the squares. What are the magnitude and direction of the net electric field at P?

Question: Beams of high-speed protons can be produced in “guns” using electric fields to accelerate the protons. (a) What acceleration would a proton experience if the gun’s electric field were 2.00×104N/C? (b) What speed would the proton attain if the field accelerated the proton through a distance of 1.00 cm?

In Fig. 22-55, positive chargeq=7.81pCis spread uniformly along a thin non-conducting rod of lengthL=14.5cm. What are the (a) magnitude and (b) direction (relative to the positive direction of the xaxis) of the electric field produced at point P, at distanceR=6.00cmfrom the rod along its perpendicular bisector?

A uniform electric field exists in a region between two oppositely charged plates. An electron is released from rest at the surface of the negatively charged plate and strikes the surface of the opposite plate, 2.0 cmaway, in a time1.5×10-8s.. (a) What is the speed of the electron as it strikes the second plate? (b) What is the magnitude of the electric field?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free