LCoscillators have been used in circuits connected to loudspeakers to create some of the sounds of electronic music. What inductance must be used with a 6.7 µF capacitor to produce a frequency of10 kHz, which is near the middle of the audible range of frequencies?

Short Answer

Expert verified

The inductance to be used is3.78×10-5H , which is near the middle of the audible range of frequencies.

Step by step solution

01

The given data

  1. The capacitance of the capacitor,C=6.7μF.
  2. The frequency that the capacitor will producef=10kHz or10000Hz.
02

Understanding the concept of inductance

Inductance is the tendency of an electrical conductor to oppose a change in the electric current flowing through it. By using the direct relationship between the frequency of inductance and the inductance, we can find the inductance.

Formulae:

The resonance frequency of an LC oscillation, f=12πLC. (i)

03

Calculation of the value of inductance

By using equation (i), we can find the inductance to be used having frequency near the middle of the audible range of frequencies as follows:

L=12π2f2C=12π2100002×6.7×10-6=12π2100002×6.7×10-6=3.78×10-5H

Hence, the value of the inductance is 3.78×10-5H.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

(a) At what frequency would a 6.0mH inductor and a10mFcapacitor have the same reactance? (b) What would the reactance be? (c) Show that this frequency would be the natural frequency of an oscillating circuit with the same Land C.

(a) Does the phasor diagram of Fig. 31-26 correspond to an alternating emf source connected to a resistor, a capacitor, or an inductor? (b) If the angular speed of the phasors is increased, does the length of the current phasor increase or decrease when the scale of the diagram is maintained?

A charged capacitor and an inductor are connected at time t=0. In terms of the period T of the resulting oscillations, what is the first later time at which the following reach a maximum: (a)UB, (b) the magnetic flux through the inductor, (c) di/dt
, and (d) the EMF of the inductor?

In Fig. 31-7, R=15.0Ω, C=4.70μF, and L=25.0mH. The generator provides an emf with rms voltageVRCL=75.0Vand frequency f=550Hz. (a) What is the rms current? What is the rms voltage across (b) R, (c) C, (d) L, (e) C and L together, and (f) R, C, and L together? At what average rate is energy dissipated by (g) R , (h) C, and (i) L?

An alternating source with a variable frequency, an inductor with inductance L, and a resistor with resistance Rare connected in series. Figure gives the impedance Zof the circuit versus the driving angular frequency ωd, with the horizontal axis scale set by (ωd)s=1600rad/s. The figure also gives the reactance XLfor the inductor versus ωd. (a) What isR? (b) What isL?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free