An 50.0mHinductor is connected, as in Figure to an ac generator with m=30.0V.(a) What is the amplitude of the resulting alternating current if the frequency of the emf is 1.00kHz? and (b) What is the amplitude of the resulting alternating current if the frequency of the emf is 8.00kHz?

An inductor is connected across an alternating-current generator.

Short Answer

Expert verified
  1. The amplitude of the resulting alternating current if the frequency of the emf has a valuef=1.00kHzis 95.5mA.
  2. The amplitude of the resulting alternating current if the frequency of the emf has a value f=8.00kHzis 11.9mA.

Step by step solution

01

The given data

  1. Emf of the ac generator,m=30.0V
  2. Series inductance,L=5.0mH=5×10-3H
02

Understanding the concept of capacitive reactance and Ohm’s law

An inductor's obstruction in the current flow is known as inductive reactance. By determining the reactance due to the oscillation frequency within an inductor, we can get the current value by substituting this value in the voltage equation of Ohm's law.

The inductive reactance of a capacitor,

XL=2πfdL...... (i)

The voltage equation from Ohm’s law,

iL=mXL........ (ii)

Here, fdis the driving frequency of oscillations, Lis the inductance of the inductor, and mis the emf applied across the circuit.

03

a) Calculation of the resulting current for frequency 1.00 kHz

Since the circuit contains only the inductor and sinusoidal generator, the potential difference across the inductor and sinusoidal generator are the same.

VL=m

mis the amplitude of the sinusoidal generator.

Thus, substituting equation (ii) in equation (i), we can get the resulting current through the inductor for frequencyf=1.00kHz as follows:

IL=m2πfdLIL=30V2π1×103Hz50×10-3HIL=0.0955AIL=95.5mA

Hence, the value of current is 95.5mA.

04

b) Calculation of the resulting current for frequency 8.00 kHz

The amplitude of alternating current if the frequency of emf is8kHz.

In this case, the frequency is eight times larger than part a). Thus, the value of the resulting current is given as:

IL=18m2πfdLIL=95.5mA8IL=11.9mA

Hence, the value of the current is 11.9mA.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Remove the inductor from the circuit in Figure and set R=200Ω,C=15.0μF,fd=60.0Hzand εm=36.0V.(a)What is the Z? (b)What is the ϕ?(c)What is the I?(d) Draw a phasor diagram.

A series RLC circuit is driven by an alternating source at a frequency of400Hz and an emf amplitude of 90.0V. The resistance is20.0Ω, the capacitance is12.1μF, and the inductance is24.2mH. What is the RMS potential difference across (a) the resistor, (b) the capacitor, and (c) the inductor? (d) What is the average rate at which energy is dissipated?

A series RLC circuit is driven by a generator at a frequency of2000Hzand an emf amplitude of 170V. The inductance is60.0mH , the capacitance is0.400μF , and the resistance is 200Ω. (a) What is the phase constant in radians? (b) What is the current amplitude?

An alternating source with a variable frequency, an inductor with inductance L, and a resistor with resistance Rare connected in series. Figure gives the impedance Zof the circuit versus the driving angular frequency ωd, with the horizontal axis scale set by (ωd)s=1600rad/s. The figure also gives the reactance XLfor the inductor versus ωd. (a) What isR? (b) What isL?

An ac generator provides emf to a resistive load in a remote factory over a two-cable transmission line. At the factory a stepdown transformer reduces the voltage from its (rms) transmission value Vtto a much lower value that is safe and convenient for use in the factory. The transmission line resistance is R=0.30Ω/cable, and the power of the generator is P=250kW. If Vt=80kV, what are (a) the voltage decreases V along the transmission line and (b) the rate ΔV at which energy is dissipated in the line as thermal energy? If Vt=80kV, what are (c) V and (d)ΔV ? If Vt=80kV, what are (e) V and (f) Pd?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free