In an oscillating LCcircuit withL=50mHandC=40μF, the current is initially a maximum. How long will it take before the capacitor is fully charged for the first time?

Short Answer

Expert verified

It takes7.0×10-4sec long before the capacitor is fully charged for the first time.

Step by step solution

01

The given data

  1. The inductance of the LC circuit,L=50mH or50×10-3H
  2. The capacitance of the LC circuit,C=40μF=40×10-6F
  3. Initially, the current is at maximum.
02

Understanding the concept of a period of oscillation

Angular frequency is also known as radial frequency, measured as the angular displacement per unit time. By using the formula for angular frequency in terms of the period, we will find the time taken for charging the capacitor fully.

Formulae:

The resonance frequency of an LC circuit, ω=1LC (i)

The angular frequency of an oscillation, ω=2πT (ii)

03

Calculation of the time taken by the capacitor to fully charge 

From equations (i) and (ii), we can get the period of oscillations as follows:

T=2πLC=2×3.1450×10-3×4×10-6=0.0028sec

The time required for the charge to rise from zero to its first maximum value is one-quarter of a period. Thus, the required time for the capacitor being fully charged can be given as:

t=T4=0.00284=7.0×10-4sec

Hence, the time required to fully charge the capacitor for the first time is 7.0×10-4sec.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

When the generator emf in Sample Problem 31.07 is a maximum, what is the voltage across (a) the generator, (b) the resistance, (c) the capacitance, and (d) the inductance? (e) By summing these with appropriate signs, verify that the loop rule is satisfied.

An alternating emf source with a certain emf amplitude is connected, in turn, to a resistor, a capacitor, and then an inductor. Once connected to one of the devices, the driving frequency fdis varied and the amplitude Iof the resulting current through the device is measured and plotted. Which of the three plots in Fig. 31-22 corresponds to which of the three devices?

An RLC circuit such as that of Fig. 31-7 hasR=5.0Ω,C=20.0μF,L=1.0H, andεm=30.0V. (a) At what angular frequencyωdwill the current amplitude have its maximum value, as in the resonance curves of Fig. 31-16? (b) What is this maximum value? At what (c) lower angular frequencyωd1and (d) higher angular frequencyωd2will the current amplitude be half this maximum value? (e) For the resonance curve for this circuit, what is the fractional half-width(ωd2-ωd1)/ω?

A typical light dimmer used to dim the stage lights in a theater consists of a variable inductor L (whose inductance is adjustable between zero and Lmax) connected in series with a lightbulb B, as shown in Fig. 31-34. The electrical supply is Vrms=20Vat f=60Hz; the light bulb is rated at 120 V, p=1000W. (a) What Lmax is required if the rate of energy dissipation in the lightbulb is to be varied by a factor of 5 from its upper limit of 1000W? Assume that the resistance of the lightbulb is independent of its temperature. (b) Could one use a variable resistor (adjustable between zero and Rmax ) instead of an inductor? (c) If so, what Rmax is required? (d) Why isn’t this done?

The values of the phase constant ϕ for four sinusoidally driven series RLC circuits are (1) ϕ=-15°, (2) ϕ=+35°, (3) ϕ=π3rad, and (4) ϕ=-π6rad. (a) In which is the load primarily capacitive? (b) In which does the current lag the alternating emf?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free