It has been proposed that a spaceship might be propelled in the solar system by radiation pressure, using a large sail made of foil. How large must the surface area of the sail be if the radiation force is to be equal in magnitude to the Sun’s gravitational attraction? Assume that the mass of the ship + sail is 1500 kg, that the sail is perfectly reflecting, and that the sail is oriented perpendicular to the Sun’s rays. See Appendix C for needed data. (With a larger sail, the ship is continuously driven away from the Sun.)

Short Answer

Expert verified

The surface area of the sail, A=9.5×105m2.

Step by step solution

01

Step 1: Given data

Mass of ship and sail, m=1500kg .

Sail is perfectly reflected.

02

Determining the concept

Here, we need to use the concept of force developed due to the radiation pressure. The force acting on a perfectly reflective surface of the area as a result of incident radiation of intensity I is given byF\user1=2IAc, wherecis the speed of light.

Formulae are as follows:

For purely reflecting surface, the radiation pressure, p=2Ic.

Where c is the speed of light, and I is the intensity of radiation.

Attractive force due to Sun on mass m is,F=GmMsd2

Where MS is the mass of the sun, F is the force, d is the distance.

03

(a) Determining the surface area of the sail

The spaceship is propelled in the solar system by the radiation pressure, and at the same time, it’s attracted by the sun. So write force equations as follows:

Fs=GmMsd2=pA=fr

Where A is the surface area of the sail, and p is the radiation pressure, and where Fs, Fr are forces due to sun and radiation.

For purely reflecting surface, radiation pressure,p=2Ic

GmMsd2=2IAc

Hence, the Surface area can be calculated as,

A=GmMsd2×c2I

Substitute the values in the above expression, and we get,

A=6.67×10-11×1500×1.99×1030×3×1081.50×10112×2×1.40×103=6.67×15×1.99×3×10291.50×2×1.40×1025A=9.5×105m2

Therefore, the surface area of the sail, 9.5x105 m2 .

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In Fig. 33-73, a long, straight copper wire (diameter2.50 mm and resistance1.00 Ωper300 m ) carries a uniform current of 25 Ain the positive x direction. For point P on the wire’s surface, calculate the magnitudes of (a) the electricfield,E(b) the magnetic field , Band (c) the Poynting vector S, and (d) determine the direction of S.

Question: In Fig. 33-64, a light ray in air is incident on a flat layer of material 2 that has an index of refraction n2=1.5 . Beneath material 2is material 3 with an index of refraction n3.The ray is incident on the air–material 2 interface at the Brewster angle for that interface. The ray of light refracted into material 3happens to be incident on the material 2-material 3 interface at the Brewster angle for that interface. What is the value of n3 ?

Question: Suppose the prism of Fig. 33-53 has apex angle ϕ=60oand index of refractionn=1.60 . (a) What is the smallest angle of incidenceθ for which a ray can enter the left face of the prism and exit the right face? (b) What angle of incidenceθ is required for the ray to exit the prism with an identical angleθ for its refraction, as it does in Fig. 33-53?

Figure:

In Fig. 33-42, unpolarized light is sent into a system of three polarizing sheets. The anglesθ1,θ2andθ3of the polarizing directions are measured counterclockwise from the positive direction of the yaxis (they are not drawn to scale). Anglesθ1and θ3are fixed, but angle θ2can be varied. Figure 33-43 gives the intensity of the light emerging from sheet 3 as a function of θ2. (The scale of the intensity axis is not indicated.) What percentage of the light’s initial intensity is transmitted by the system when θ2=30°?

(a) Figure 33-27 shows light reaching a polarizing sheet whose polarizing direction is parallel to a y axis. We shall rotate the sheet 40° clockwise about the light’s indicated line of travel. During this rotation, does the fraction of the initial light intensity passed by the sheet increase, decrease, or remain the same if the light is (a) initially unpolarized, (b) initially polarized parallel to the x axis, and (c) initially polarized parallel to the y axis?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free