A water pipe having a 2.5cminside diameter carries water into the basement of a house at a speed of 0.90m/sand a pressure of 170kPa.

(a) If the pipe tapers to 1.2cmand rises to the second floor 7.6mabove the input point, what is the speed and

(b) If the pipe tapers to 1.2cmand rises to the second floor 7.6mabove the input point, what is the water pressure at the second floor?

Short Answer

Expert verified

Hence, the pressure of water on the second floor is

Step by step solution

01

Given data

  1. The speed of the water at the basement level,.

  2. The diameter of the pipe at the basement level,.

  3. The pressure at the basement level,.

  4. The diameter of the pipe at the second floor,.

  5. The height of the second floor,.

02

Determining the concept

Determine the speed of the water at the second floor using the equation of continuity. Then, using Bernoulli’s equation, find the pressure of water on the second floor. According to Bernoulli’s equation, as the speed of a moving fluid increases, the pressure within the fluid decreases.

Formulae are as follows:

pu12ρgg2h+constant

Av=constant

Where, pis pressure, vis velocity, his height, gis the acceleration due to gravity, his height, Ais the area, and ρis density.

03

(a) Determining the speed of the water at the second floor

The water flow through the pipe obeys the equation of continuity,

Hence,

Hence, the speed of the water at the second floor is.

04

(b) Determining the pressure of water on the second floor

The water flow obeys Bernoulli’s principle as well,

Considering,, the density of water,,

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A 8.60kgsphere of radius 6.22cmis at a depth of 2.22kmin seawater that has an average density of 1025kg/m3.What are the (a) gauge pressure, (b) total pressure, and (c) corresponding total force compressing the sphere’s surface? What are (d) the magnitude of the buoyant force on the sphere and (e) the magnitude of the sphere’s acceleration if it is free to move? Take atmospheric pressure to be 1.01×105Pa.

A pitot tube (Figure) is used to determine the airspeed of an airplane. It consists of an outer tube with a number of small holes B (four are shown) that allow air into the tube; that tube is connected to one arm of a U-tube. The other arm of the U-tube is connected to hole Aat the front end of the device, which points in the direction the plane is headed. At Athe air becomes stagnant so that vA=0. At B, however, the speed of the air presumably equals the airspeed vof the plane.

(a) Use Bernoulli’s equation to show that, v=pghρairwhere ρis the density of the liquid in the U-tube and his the difference in the liquid levels in that tube.

(b) Suppose that the tube contains alcohol and the level difference his 26.0cm. What is the plane’s speed relative to the air? The density of the air is 1.03kg/m3and that of alcohol is 810kg/m3.

Water flows smoothly in a horizontal pipe. Figure 14-27 shows the kinetic energy Kof a water element as it moves along an xaxis that runs along the pipe. Rank the three lettered sections of the pipe according to the pipe radius, greatest first.

Two streams merge to form a river. One stream has a width of8.2m, depth of3.4m, and current speed of2.3m/s. The other stream is wide6.8mand deep3.2m, and flows at 2.6m/s. If the river has width 10.5mand speed , what is its depth?

Consider the venturi tube of Figure without the manometer. Let, Aequal localid="1658313222020" 5a. Suppose the pressure localid="1658313216049" p1at localid="1658313234980" Ais localid="1658313228211" 2.0atm.

(a) Compute the values of the speed localid="1658313241250" vat A.

(b) Compute the values of the speed localid="1658313246652" vat a that make the pressure localid="1658313253283" p2at an equal to zero.

(c) Compute the corresponding volume flow rate if the diameter at A is localid="1658313260347" 5.0cm. The phenomenon that occurs at localid="1658313273085" awhen localid="1658313267168" p2 falls to nearly zero is known as cavitation. The water vaporizes into small bubbles.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free