Figure 5-66a shows a mobile hanging from a ceiling; it consists of two metal pieces(m1=3.5kgandm2=4.5kg) that are strung together by cords of negligible mass. What is the tension in (a) the bottom cord and (b) the top cord? Figure 5-66b shows a mobile consisting of three metal pieces. Two of the masses arem3=4.8kgandm5=5.5kg. The tension in the top cord is 199 N. What is the tension in (c) the lowest cord and (d) the middle cord?

Short Answer

Expert verified

a)T2=44N

b)T1=78N

c)T5=54N

d)T4=152N

Step by step solution

01

Given Data

m1=3.5kgm2=4.5kgm3=4.8kgm5=5.5kg

The tension in the top cord is 199 N.

02

Understanding the concept

In this problem we have mobiles consisting of masses connected by cords. We apply Newton’s second law to calculate the tensions in the cords.

03

Draw the free body diagrams and write the force equations

The free-body diagrams form1andm2for part (a) are shown to the right.


The bottom cord is only supporting m2=4.5kgagainst gravity, so its tension is T2=m2g.

On the other hand, the top cord is supporting a total mass of

m1+m2=3.5kg+4.5kg=8.0kg

against gravity. Applying Newton’s second law gives

T1-T2-m1g=0

So the tension is

T1=m1g+T2=(m1+m2)g

04

(a) Calculate the tension in the bottom of the cord

From the equations above, we find the tension in the bottom cord to be

T2=m2g=4.5kg(9.8m/s2)=44N

Hence the solution isT2=44N

05

(b) Calculate the tension in the top of the cord

Similarly, the tension in the top cord is

T1=m1+m2g=8.0kg9.8m/s2=78N

Hence the solution isT1=78N

06

(c) Calculate the tension in the lowest cord

The free-body diagrams form3,m4andm5for part (b) are shown below


From the diagram, we see that the lowest cord supports a mass ofm5=5.5kgagainst gravity and consequently has a tension of

T5=m5g=5.5kg9.8m/s2=54N

Hence the solution is T5=54N

07

(d) Calculate the tension in the middle cord

The top cord, as we are told, has a tensionT3=199Nwhich supports a total of 199N9.80m/s2=20.3kg, 10.3 kg of which is already accounted for in the figure. Thus, the unknown mass in the middle must be

m4=20.3kg-10.3kg=10.0kg,

and the tension in the cord above it must be enough to support

m4+m5=(10.0kg+5.50kg)=15.5kg

So

T4=(15.5kg)9.8mm2

Hence the solution isT4=152N

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Figure 5-60 shows a box of dirty money (mass m1=3.0kg) on a frictionless plane inclined at angle θ1=30°. The box is connected via a cord of negligible mass to a box of laundered money (mass m2=2.0kg) on a frictionless plane inclined at angle θ2=60°.The pulley is frictionless and has negligible mass. What is the tension in the cord?

Holding on to a towrope moving parallel to a frictionless ski slope, askier is pulled up the slope, which is at an angle of8.00with the horizontal. What is the magnitude of the force on the skier from the rope when (a) the magnitude vof the skier’s velocity is constant atlocalid="1657161930942" 2.0m/sand (b) as vincreases at a rate oflocalid="1657161837037" 0.10m/s2?

In Figure, a block of mass m=5.00 kgis pulled along a horizontal frictionless floor by a cord that exerts a force of magnitude F=12.0Nat an angleθ=25.0°

(a) What is the magnitude of the block’s acceleration?

(b) The force magnitude Fis slowly increased. What is its value just before the block is lifted (completely) off the floor?

(c) What is the magnitude of the block’s acceleration just before it is lifted (completely) off the floor?

A firefighter who weighs 712 N slides down a vertical pole with an acceleration of 3.00 m/s2, directed downward. (a) What is the magnitude of the vertical force on the firefighter from the pole and (b) What is the direction (up or down) of the vertical force on the firefighter from the pole and (c) What is the magnitude of the vertical force on the pole from the firefighter? and (d) What is the direction of the vertical force on the pole from the firefighter?

(a) An 11.0 kgSalami is supported by a cord that runs to a spring scale, which is supported by a cord hung from the ceiling (Figure-a). What is the reading on the scale, which is marked in weight units? (b) In Figure-bthe salami is supported by a cord that runs around a pulley and to a scale. The opposite end of the scale is attached by a cord to a wall. What is the reading on the scale? (c) In Figure-c the wall has been replaced with second11.0 kg salami, and the assembly is stationary. What is the reading on the scale?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free