Suppose the coefficient of static friction between the road and the tires on a car is0.60and the car has no negative lift. What speed will put the car on the verge of sliding as it rounds a level curve of30.5mradius?

Short Answer

Expert verified

The speed that will put the car on the verge of sliding as it rounds a level curve of30.5mradius is48km/h.

Step by step solution

01

Given

μs=0.60R=30.5m

02

Determining the concept

This problem is based on the concept of uniform circular motion. Uniform circular motion is a motion in which an object moves in a circular path with constant velocity.

Formula:

The velocity in uniform circular motion is given by,

v=2πRT

where, v is the velocity, R is the radius and T is the time period

03

Determining the speed that will put the car on the verge of sliding

The magnitude of the acceleration of the car as it rounds the curve is given by v2/R,where v is the speed of the car and R is the radius of the curve. Since, the road is horizontal, only the frictional force of the road on the tires makes this acceleration possible. The horizontal component of Newton’s second law is

f=mv2R

If FNis the normal force of the road on the car and m is the mass of the car, the vertical component of Newton’s second law leads to FN=mg. Thus, the maximum value of static friction is,

famax=μsFN=μsmg

If the car does not slip,fμsmg.This means,

v2Rμsg

vμsRg

Consequently, the maximum speed with which the car can round the curve without slipping is,

vmax=μsRg=0.6030.5m9.8m/s=13.4m/s48km/h

Hence, the speed that will put the car on the verge of sliding as it rounds a level curve of30.5mradius is48km/h.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A cat dozes on a stationary merry-go-round in an amusement park, at a radius of5.4mfrom the center of the ride. Then the operator turns on the ride and brings it up to its proper turning rate of one complete rotation every6.0s.What is the least coefficient of static friction between the cat and the merry-go-round that will allow the cat to stay in place, without sliding (or the cat clinging with its claws)?

Calculate the ratio of the drag force on a jet flying at 1000km/hat an altitude of10kmto the drag force on a prop-driven transport flying at half that speed and altitude. The density of air is 0.38kg/m3at 10kmand 0.67kg/m3at 5.0km.Assume that the airplanes have the same effective cross-sectional area and drag coefficient C.

In Fig. 6-60, a block weighing22 Nis held at rest against a vertical wall by a horizontal force of magnitude 60 N .The coefficient of static friction between the wall and the block is 0.55 , and the coefficient of kinetic friction between them is 0.38 . In six experiments, a second force is applied to the block and directed parallel to the wall with these magnitudes and directions: (a) 34 N , up, (b) 12 N , up, (c) 48 N , up, (d) 62 N, up, (e) 10 N , down, and (f) 18 N, down. In each experiment, what is the magnitude of the frictional force on the block? In which does the block move (g) up the wall and (h) down the wall? (i) In which is the frictional force directed down the wall?

In Fig. 6-34, blocks A and B have weights of 44Nand 22N, respectively. (a) Determine the minimum weight of block C to keep A from sliding if μkbetween A and the table is 0.20. (b) Block C suddenly is lifted off A. What is the acceleration of block A if μkbetween A and the table is 0.15?

In Fig. 6-62, a 5.0 kgblock is sent sliding up a plane inclined at θ=37°while a horizontal force of magnitude 50 Nacts on it. The coefficient of kinetic friction between block and plane is0.30. What are the (a) magnitude and (b) direction (up or down the plane) of the block’s acceleration? The block’s initial speed is 4.0 m/s. (c) How far up the plane does the block go? (d) When it reaches its highest point, does it remain at rest or slide back down the plane?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free