69 through 79 76, 78 75, 77 More lenses. Objectstands on the central axis of a thin symmetric lens. For this situation, each problem in Table 34-8 refers to (a) the lens type, converging or diverging , (b) the focal distance , (c) the object distance , (d) the image distance , and (e) the lateral magnification . (All distances are in centimetres.) It also refers to whether (f) the image is real or virtual , (g) inverted (I)or non-inverted(NI) from , and (h) on the same side of the lens asor on the opposite side. Fill in the missing information, including the value of m when only an inequality is given, where only a sign is missing, answer with the sign.

Short Answer

Expert verified
  1. The lens type is converging.
  2. The focal distance is+10cm.
  3. The object distance is5.0cm.
  4. The image distance is-10cm.
  5. The lateral magnification is +2.0.
  6. The image is virtual V.
  7. The image is non-invertedNI.
  8. The image is on the same side of the lens as the object.

Step by step solution

01

The given data

  1. Object distance,p=+5.0cm
  2. The focal length of the lens, f=+10cm
02

 Step 2: Understanding the concept of properties of the lens

Here, we need to use the concept of image formation by the thin lens. We can use equation 34.9 to solve for the image distance. The magnification of the lens can be calculated using equation 34.7. By using the values of image distance and magnification, and comparing the value of object distance and focal length we can determine whether the image is real or virtual, whether it is inverted or non-inverted, and whether it is on the same side as the object or on the opposite side.

03

 Step 3: Calculation of the lens type

(a)

The value of the focal length is positive.

Hence, the lens is a converging lens.

04

 Step 4: Calculation of the focal distance

(b)

From the given data, the value of focal length is given as:f=+10cm.

Hence, the focal distance is +10cm.

05

Calculation of the object distance

(c)

From the given data, the value of object distance is given as:p=+5.0cm

Hence, the object distance is +5.0cm.

06

Calculation of the image distance

(d)

Now, using the above data in equation (i), we can get the image distance as follows:

1i=110cm-15.0cm=-0.1cmi=-10cm

Hence, the image distance is -10cm.

07

 Step 7: Calculation of the lateral magnification

(e)

Using the given data in equation (ii), we can get the lateral magnification of the lens as follows:

m=--105.0=+2.0

Hence, the value of magnification is +2.0.

08

Calculation of the type of image

(f)

The value of image distance is negative.

Hence, the image is virtual (V).

09

 Step 9: Calculation if the image is inverted or not

(g)

The value of lateral magnification is positive.

Hence, the image is non-inverted (NI).

10

Calculation of the position of the object

(h)

From the above data, it is given thatp<f.

Hence, the image is on the same side as object.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

An object is 20cmto the left of a thin diverging lens that has a 30cmfocal length. (a) What is the image distance i? (b) Draw a ray diagram showing the image position.

Figure 34-30 shows four thin lenses, all of the same material, with sides that either are flat or have a radius of curvature of magnitude 10cm. Without written calculation, rank the lenses according to the magnitude of the focal length, greatest first.

80 through 87 80, 87 SSM WWW 83 Two-lens systems. In Fig. 34-45, stick figure (the object) stands on the common central axis of two thin, symmetric lenses, which are mounted in the boxed regions. Lens 1 is mounted within the boxed region closer to O, which is at object distance p1. Lens 2 is mounted within the farther boxed region, at distance d. Each problem in Table 34-9 refers to a different combination of lenses and different values for distances, which are given in centimeters. The type of lens is indicated by C for converging and D for diverging; the number after C or D is the distance between a lens and either of its focal points (the proper sign of the focal distance is not indicated). Find (a) the image distance localid="1663045000066" i2for the image produced by lens 2 (the final image produced by the system) and (b) the overall lateral magnification Mfor the system, including signs. Also, determine whether the final image is (c) real(R)or virtual localid="1663045476655" (V), (d) inverted (I)from object O or non-inverted (NI), and (e) on the same side of lens 2 as object O or on the opposite side.

80 through 87 80, 87 SSM WWW 83 Two-lens systems. In Fig. 34-45, stick figure O (the object) stands on the common central axis of two thin, symmetric lenses, which are mounted in the boxed regions. Lens 1 is mounted within the boxed region closer to O, which is at object distance p1. Lens 2 is mounted within the farther boxed region, at distance d. Each problem in Table 34-9 refers to a different combination of lenses and different values for distances, which are given in centimeters. The type of lens is indicated by C for converging and D for diverging; the number after C or D is the distance between a lens and either of its focal points (the proper sign of the focal distance is not indicated). Find (a) the image distance i2for the image produced by lens 2 (the final image produced by the system) and (b) the overall lateral magnification Mfor the system, including signs.Also, determine whether the final image is (c) real(R) or virtual (V), (d) inverted (I)from object O or non-inverted (NI), and (e) on the same side of lens 2 as the object O or on the opposite side.

Figure 34-56 shows a beam expander made with two coaxial converging lenses of focal lengths f1and f1and separationd=f1+f2. The device can expand a laser beam while keeping the light rays in the beam parallel to the central axis through the lenses. Suppose a uniform laser beam of width Wi=2.5mmand intensity Ii=9.0kW/m2enters a beam expander for whichf1=12.5cmand f2=30.0cm.What are (a) Wfand (b) lfof the beam leaving the expander? (c) What value of d is needed for the beam expander if lens 1 is replaced with a diverging lens of focal lengthf1=-26.0cm?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free