The table details six variations of the basic arrangement of two thin lenses represented in Fig. 34-29. (The points labeledF1and F2are the focal points of lenses 1 and 2.) An object is distancep1to the left of lens 1, as in Fig. 34-18. (a) For which variations can we tell, without calculation, whether the final image (that due to lens 2) is to the left or right of lens 2 and whether it has the same orientation as the object? (b) For those “easy” variations, give the image location as “left” or “right” and the orientation as “same” or “inverted.”

Short Answer

Expert verified
  1. For the given case variations 1,3,4,5&6 we can say that, image is towards left or right of lens.
  2. Variation for 1,3&4are right, real and inverted. Variation for 5,6are Left, virtual, same.

Step by step solution

01

The given data

The two lens-systems with the object and focal distance relation for every variation are given.

02

Understanding the concept of lens

When a ray of light is passed through lens 1, the image formed depends on the position and the type of lens. If both sides of the lens curve are outward in form, the lens is called a converging lens, and here, the lens will bend light from distant objects inwards toward a single point, called the focal point. If both sides of the lens curve inward, it is called a diverging lens, and light from distant objects will bend outwards. As long as the object is outside of the focal point the image is real and inverted. When the object is inside the focal point the image becomes virtual and upright. Negative lenses diverge from the parallel incident light rays and form a virtual image by extending traces of the light rays passing through the lens to a focal point behind the lens.

03

a) Calculation of the variations that are either left or right of lens 2

The image distance due to lens 1 is I1.

The image distance due to lens 2 isI2.

The object distance from lens 1 isp1.

The object distance from lens 2 isp2.

Here, image formed by lensis the object for lens

Hence, the image distance from lens 1 is equal to the object distance of lens 2,

i1=p2

For converging lens, if

  1. p1>f1the image is real and inverted.
  2. p1<f1the image is virtual and upright.

For diverging lens, if

  1. p1>f1the image is virtual and located between the object and the lens.
  2. p1<f1the image is virtual and located between the object and the lens.
  1. Variation 1:

lens1 : Converging

lens2: Converging.

p1<f1 gives a virtual and upright image to the left of lens

Hence, p2>f2, so the converging lens gives a real and an inverted image to the right of the lens

  1. Variation 2:

lens1 : Converging

lens2: Converging.

p1>f1so, the converging lensgives a real and an inverted image to the right of lens

Now, we can’t say that whether this image is inside or outside of the focus of lens

  1. Variation 3:

lens1 : Diverging

lens2: Converging.

p1<f1so, the diverging lensgives a virtual and an upright image to the left of lens

Hence,p2>f2, so the converging lensgives a real and an inverted image to the right of lens

  1. Variation 4:

lens1 : Diverging

lens2: Converging.

p1>f1, so diverging lensgives virtual and upright image to the left of lens

Hence,p2>f2 so the converging lensgives a real and an inverted image to the right of lens

  1. Variation 5:

Lens1 : Diverging

Lens2: Diverging.

p1<f1,so the diverging lensgives a virtual and an upright image to the left of lens

Hence,p2>f2so diverging lensgives a virtual and an upright image to the left of lens

  1. Variation 6:

Lens 1: Diverging

Lens 2: Diverging.

p1>f1, so the diverging lensgives a virtual and an upright image to the left of lens

Hence,p2>f2, so the diverging lensgives a virtual and an upright image to the left of lens

From above data:

Hence, for variations 1,3,4,5&6, we can say that the image is towards left or right of the lens.

04

b) Calculation of the positions and orientations of the variations

Now, from above calculations the positions and orientations of the variations, we can say that the image property of the variations 1, 3, 4, 5 and 6, while the image position for variation 2 is uncertain.

For variations 1, 3, and 4, we have that the image is real, inverted and upright as the object distance is greater than the focal length of the mirror for both the lens.

Similarly, for the variations 5,6, we have the image is towards the left of the lens with being virtual in nature and has same height that of the object with object distance less than the focal length for lens 1 while the object distance is greater than the focal length for lens 2.

Hence, variation 1,3&4: right, real and inverted and variation 5,6: Left, virtual, same.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Figure 34-34 shows a small light bulb suspended at distance d1=250cmabove the surface of the water in a swimming pool where the water depth d2=200cm. The bottom of the pool is a large mirror. How far below the mirror surface is the image of the bulb? (Hint: Assume that the rays are close to a vertical axis through the bulb, and use the small-angle approximation in which sinθtanθθ)

You look down at a coin that lies at the bottom of a pool of liquid of depthand index of refraction(Fig. 34-57). Because you view with two eyes, which intercept different rays of light from the coin, you perceive the coin to bewhere extensions of the intercepted rays cross, at depthdainstead of d. Assuming that the intercepted rays in Fig. 34-57 are close to a vertical axis through the coin, show that da=dn.


17 through 29 22 23, 29 More mirrors. Object O stands on the central axis of a spherical or plane mirror. For this situation, each problem in Table 34-4 refers to (a) the type of mirror, (b) the focal distancef, (c) the radius of curvaturer, (d) the object distancep, (e) the image distancei, and (f) the lateral magnification localid="1663002056640" m. (All distances are in centimeters.) It also refers to whether (g) the image is real (R)or virtual (V), (h) inverted (I)or noninverted (NI)from O, and (i) on the same side of the mirror as the object O or on the opposite side. Fill in the missing information. Where only a sign is missing, answer with the sign.

In Fig. 34-52, an object is placed in front of a converging lens at a distance equal to twice the focal length f1of the lens. On the other side of the lens is a concave mirror of focal lengthf2separated from the lens by a distance 2(f1+f2). Light from the object passes rightward through the lens, reflects from the mirror, passes leftward through the lens, and forms a final image of the object. What are (a) the distance between the lens and that final image and (b) the overall lateral magnification M of the object? Is the image (c) real or virtual (if it is virtual, it requires someone looking through the lens toward the mirror), (d) to the left or right of the lens, and (e) inverted or non-inverted relative to the object?

Two plane mirrors are placed parallel to each other and 40cmapart. An object is placed 10cmfrom one mirror. Determine the (a) smallest, (b) second smallest, (c) third smallest (occurs twice), and (d) fourth smallest distance between the object and image of the object.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free