80 through 87 80, 87 SSM WWW 83 Two-lens systems. In Fig. 34-45, stick figure (the object) stands on the common central axis of two thin, symmetric lenses, which are mounted in the boxed regions. Lens 1 is mounted within the boxed region closer to O, which is at object distance p1. Lens 2 is mounted within the farther boxed region, at distance d. Each problem in Table 34-9 refers to a different combination of lenses and different values for distances, which are given in centimeters. The type of lens is indicated by C for converging and D for diverging; the number after C or D is the distance between a lens and either of its focal points (the proper sign of the focal distance is not indicated). Find (a) the image distance localid="1663045000066" i2for the image produced by lens 2 (the final image produced by the system) and (b) the overall lateral magnification Mfor the system, including signs. Also, determine whether the final image is (c) real(R)or virtual localid="1663045476655" (V), (d) inverted (I)from object O or non-inverted (NI), and (e) on the same side of lens 2 as object O or on the opposite side.

Short Answer

Expert verified

a. The image distance for the image produced by lens 2, i2=+24cm

b. Overall lateral magnification, including sign,M=+6.0

c. The final image is realR

d. The final image is not inverted NI

e. The final image is on the opposite side from the object.

Step by step solution

01

Step 1: Given Information

Object stands on the common central axis of two thin symmetric lenses.

Distance between object and lens 1,p1=+12cm

Distance between lens 1 and 2,d=32cm

Lens 1 converging, focal lengthf1=8cm

Lens 2 converging, focal lengthf2=6cm

02

Determining the concept

Using the relation between focal length, image distance and object distance find the image distance i2. Then using the formula for overall magnification find its value.

From the solution of part a and b answer part c, d and e.

Formula are as follows:

Formula for focal length,1f=1p+1i

Overall magnification,M=m1m2

Magnification,m=-ip

Where,mis the magnification, p is the pole, fis the focal length, and i is the image distance.

03

Determining the image distance for the image produced by lens 2, i2

(a)

For lens 1, focal length f1, object distancep1

Using expression for focal length,

1f1=1p1+1i11i1=1f1-1p11i1=p1-f1f1p1i1=f1p1p1-f1

i1=f1p1p1-f1.1

i1=8×1212-8i1=964

This serves as an object for lens 2,p2=d-i1=32-24=8cm , and it is given thatf2=6cm

Modifying equation 1 for lens 2,

i2=f2p2p2-f2

i2=6×88-6i2=482i2=24cm

The image produced by lens 2 is at 24cm.

Therefore, the image distance for the image produced by lens 2,i2=+24cm.

04

Determining the overall lateral magnification, including sign, M

(b)

To find overall magnification use the formula,

M=m1m2

Magnification m=-ip

M=-i1p1×-i2p2M=-2412×-248M=+6.0

Overall magnification for the given lens system is +6.0.

Therefore, the overall lateral magnification, including sign,M=+6.0.

05

Determining whether the final image is real (R)or virtual (V)

(c)

Since lens 1 and 2 are converging, the object for lens 2 is outside the focal point. The final image distance is positive. Hence, the image formed by this lens system is real.

Therefore, the final image is real (R).

06

Determining the whether the final image is inverted (I) or non-inverted (NI)

(d)

Overall magnification for this lens system is positive, which shows that the image and the object have the same orientation.

Hence, the image is not inverted.

07

Determining whether the final image is on the same side of lens 2 as object O or on the opposite side.

(e)

The final image distance is positive which shows that it is on the positive side of the lens 2, that is on the opposite side of the object.

The focal length and overall magnification of two-lens system can be found using corresponding formula. The nature of the image can be predicted from the characteristics of image formed due to given two-lens system.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

50 through 57 55, 57 53 Thin lenses. Object Ostands on the central axis of a thin symmetric lens. For this situation, each problem in Table 34-6 gives object distance p (centimeters), the type of lens (C stands for converging and D for diverging), and then the distance (centimeters, without proper sign) between a focal point and the lens. Find (a) the image distance iand (b) the lateral magnification m of the object, including signs. Also, determine whether the image is (c) real (R) or virtual (V) , (d) inverted (I)from object O or non inverted (NI) , and (e) on the same side of the lens as object Oor on the opposite side.

32 through 38 37, 38 33, 35 Spherical refracting surfaces. An object Ostands on the central axis of a spherical refracting surface. For this situation, each problem in Table 34-5 refers to the index of refraction n1where the object is located, (a) the index of refraction n2on the other side of the refracting surface, (b) the object distance p, (c) the radius of curvature rof the surface, and (d) the image distance i. (All distances are in centimeters.) Fill in the missing information, including whether the image is (e) real (R)or virtual (V)and (f) on the same side of the surface as the objector on the opposite side.

(a) A luminous point is moving at speedV0toward a spherical mirror with a radius of curvaturer, along the central axis of the mirror. Show that the image of this point is moving at the speed

vI=-(r2p-r)2v0

Where,p is the distance of the luminous point from the mirror at any given time. Now assume the mirror is concave, withr=15cm.and letV0=5cm/s. FindV1when (b)p=30cm(far outside the focal point), (c) p=8.0cm(just outside the focal point), and (d)p=10mm(very near the mirror).

A double-convex lens is to be made of glass with an index of refraction of 1.5.One surface is to have twice the radius of curvature of the other and the focal length is to be 60mm. What is the (a) smaller and (b) larger radius?

A lens is made of glass having an index of refraction of 1.5. One side of the lens is flat, and the other is convex with a radius of curvature of 20 cm(a) Find the focal length of the lens. (b) If an object is placed 40 cmin front of the lens, where is the image?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free