In a microscope of the type shown in Fig. 34-20, the focal length of the objective is 4.00 cm, and that of the eyepiece is 8.00 cm. The distance between the lenses is 25.00 cm. (a) What is the tube length s? (b) If image I in Fig. 34-20 is to be just inside focal point F1, how far from the objective should the object be? What then are (c) the lateral magnification m of the objective, (d) the angular magnification mθ of the eyepiece, and (e) the overall magnification M of the microscope?

Short Answer

Expert verified
  1. Tube length iss=13cm .
  2. Distance of the object from the objective,p=5.23cm.
  3. Lateral magnification,m=-3.25.
  4. Angular magnification,mθ=3.13.
  5. Overall magnification,M=-10.2 .

Step by step solution

01

Step 1: Given data

The focal length of the objective,fob=4cm=0.04m .

The focal length of the eyepiece,fey=8cm=0.08m.

Distance between the lenses,L=25cm=0.25m .

02

Determining the concept

From the fig.34.20, write an expression for the tube length. Inserting the given values will give its value. Using the lens law, find the distance between the objective and the object. Then using the corresponding formulae, find the magnification of the objective, angular magnification of the eyepiece, and overall magnification of the compound microscope.

Formula are as follows:

  • Tube length,s=L-fob-fey.
  • Thin lens formula, 1f0b=1p+1i.
  • Magnification, m=-ip.
  • Overall magnification,M=mmθ.
  • Angular magnification, mθ=25fey.

Where m is the magnification, p is the pole, f is the focal length, and i is the image distance, mθis theangular magnification,s is the tube length.

03

Determining the tube length s

(a)

From figure 34.20,

s=L-fob-fey

Inserting the given values,

s=0.25-0.04-0.08

role="math" localid="1663019531134" s=0.13m=13cm

Hence, the Tube length is 13 cm.
04

Determining if the image I is to be just inside the focal point F1, then how far from the objective should the object be?

(b)

To calculate the distance between the objective and the object (p) needs the image distance I.

From the figure, write,

i=fob+si=0.04+0.13i=0.17m

The lens formula is given by,

1f0b=1p+1i10.04=1p+10.171p=10.04-10.17p=0.0523m=5.23cm

Therefore, the distance between the objective and the object is 5.23 cm.

05

Determining the lateral magnification m.

(c)

Find the magnification of the objective using the values of i and p as follows:

m=-ipm=-0.170.0523m=-3.25

Therefore, the magnification of the objective is -3.25.

06

 Determining the angular magnification mθ

(d)

The angular magnification of the eyepiece can be calculated as,

mθ=25cmfeymθ=25cm8cmmθ=3.13

Therefore, the angular magnification of the eyepiece is 3.13.

07

Determining the overall magnification M

(e)

Overall magnification of the microscope is,

M=mmθM=-3.25×3.13M=-10.1725~-10.2

Therefore, the overall magnification of the microscope is -10.2.

The tube length, the distance between the objective and object, magnification of the objective, angular magnification of the eyepiece, and overall magnification of the compound microscope can be found using the corresponding formulae.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A millipede sits 1.0min front of the nearest part of the surface of a shiny sphere of diameter 0.70m(a) How far from the surface does the millipede’s image appear? (b) If the millipede’s height is 2.0mm, what is the image height? (c) Is the image inverted?

32 through 38 37, 38 33, 35 Spherical refracting surfaces. An object Ostands on the central axis of a sphericalrefractingsurface. For this situation, each problem in Table 34-5 refers to the index of refractionn1where the object is located, (a) the index of refraction n2on the other side of the refracting surface, (b) the object distance p, (c) the radius of curvature rof the surface, and (d) the image distance i. (All distances are in centimeters.) Fill in the missing information, including whether the image is (e) real (R)or virtual (V)and (f) on the same side of the surface as object Oor on the opposite side

32 through 38 37, 38 33, 35 Spherical refracting surfaces. An object Ostands on the central axis of a spherical refracting surface. For this situation, each problem in Table 34-5 refers to the index of refraction n1where the object is located, (a) the index of refraction n2on the other side of the refracting surface, (b) the object distancep, (c) the radius of curvature rof the surface, and (d) the image distance i. (All distances are in centimeters.) Fill in the missing information, including whether the image is (e) real (R)or virtual (V)and (f) on the same side of the surface as the object Oor on the opposite side.

80 through 87 80, 87 SSM WWW 83 Two-lens systems. In Fig. 34-45, stick figure O (the object) stands on the common central axis of two thin, symmetric lenses, which are mounted in the boxed regions. Lens 1 is mounted within the boxed region closer to O, which is at object distance p1. Lens 2 is mounted within the farther boxed region, at distance d. Each problem in Table 34-9 refers to a different combination of lenses and different values for distances, which are given in centimeters. The type of lens is indicated by C for converging and D for diverging; the number after C or D is the distance between a lens and either of its focal points (the proper sign of the focal distance is not indicated). Find (a) the image distance i2for the image produced by lens 2 (the final image produced by the system) and (b) the overall lateral magnification Mfor the system, including signs.Also, determine whether the final image is (c) real(R) or virtual (V), (d) inverted (I)from object O or non-inverted (NI), and (e) on the same side of lens 2 as the object O or on the opposite side.

50 through 57 55, 57 53 Thin lenses. Object Ostands on the central axis of a thin symmetric lens. For this situation, each problem in Table 34-6 gives object distance p (centimeters), the type of lens (C stands for converging and D for diverging), and then the distance (centimeters, without proper sign) between a focal point and the lens. Find (a) the image distance localid="1662982946717" iand (b) the lateral magnification m of the object, including signs. Also, determine whether the image is (c) real (R) or virtual (V) , (d) inverted (I) from object O or non inverted (NI), and (e) on the same side of the lens as object Oor on the opposite side.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free