95 through 100. Three-lens systems. In Fig. 34-49, stick figure O (the object) stands on the common central axis of three thin, symmetric lenses, which are mounted in the boxed regions. Lens 1 is mounted within the boxed region closest to O, which is at object distance p1. Lens 2 is mounted within the middle boxed region, at distance d12from lens 1. Lens 3 is mounted in the farthest boxed region, at distancefrom lens 2. Each problem in Table 34-10 refers to a different combination of lenses and different values for distances, which are given in centimeters. The type of lens is indicated by C for converging and D for diverging; the number after C or D is the distance between a lens and either of the focal points (the proper sign of the focal distance is not indicated). Find (a) the image distance i3for the (final) image produced by lens 3 (the final image produced by the system) and (b) the overall lateral magnification M for the system, including signs. Also, determine whether the final image is (c) real (R)or virtual (V), (d) inverted (I)from object O or non-inverted (Nl), and (e) on the same side of lens 3 as object O or on the opposite side.

Short Answer

Expert verified
  1. The image distancedue to the image produced by the lens 3 isi3=-4.0cm .
  2. The overall lateral magnification ism=-1.2.
  3. The final image is virtual.
  4. The final image is inverted.
  5. The final image is on the same side as the object.

Step by step solution

01

Given data

  • Focal length

f1=6.0cm

f2=6.0cm

f3=4.0cm

  • Objects distance;p1=4.0cm
  • Distance between lens 1 and 2 isd1=9.6cm

Distance between lens 2 and 3 isd23=14.0cm

02

Determining the concept

First, find out the image distance for each lens using the lens formula. After that, find the magnification of each lens using the corresponding formula. Using this, find the total magnification. From the sign of the total magnification, whether the image is inverted or non-inverted. Also, from the sign of the final image distance for the last lens, conclude whether the image is real or virtual and on which side of the object the final image is present.

Formulae are as follows:

1f=1p+1i

m=-ip

Here,m is the magnification, pis the pole, fis the focal length, and iis the image distance.

03

(a) Determining the image distancei3 due to the image produced by the lens 3.

According to equation 34-4 first, find the image distance i1as1f=1p+1i

Lens 1 is diverging so that the focal length is negative.

1i1=1f1-1p1

So,

i1=f1p1p1-f1

Substituting the value,

i1=4.0×-64+6=-2410=-2.4cm

So, now find thei.e. the object distance due to lens 2.

p2=d12-i1

Putting the value ofi1p2=9.6+2.4

p2=12cm

FromP2 , calculate the image distancei2of the image produced by the lens 2 is,

1f2=1p2+1i2

Lens 2 is converging so that the focal length due to lens 2 is positive.

1i2=1f2-1p2

So,

i2=f2p2p2-f2

Substituting the value,

i2=12×612-6

i2=726=12cm

Now, calculate the object distance role="math" localid="1663151409496" P3as,

p3=d23-i2

Putting the value ofi2 ,

p3=14-12=2cm

Now, calculate the image distance due to lens 3 as1f3=1p3+1i3

The lens 3 is converging so that the focal length due to lens 3 is positive.

1i3=1f3-1p3

So,

i3=f3p3p3-f3

Substituting the value,

i3=2×42-4=-82=-4.0cm

Therefore, the image distance i3due to the image produced by lens 3 isi3=-4.0cm

04

(b) Determine the overall lateral magnification.

Now, calculate the lateral magnification. The total magnification is the product of the magnification due to each lens.

m=-ip

Magnification due to lens 1,

m1=-i1p1

Substituting the values,

m1=--2.44=0.6

Magnification due to lens 2,

m2=-i2p2

Substituting the values,

m2=-1212=-1

Magnification due to lens 2,

role="math" m3=-i3p3

Substituting the values,

m3=--42=2

So, the total magnification is,

m=m1m2m3

Substitute the above calculated values of the magnification,

m=-0.6×2×1=-1.2

Therefore, the overall lateral magnification ism=-1.2 .

05

(c) Determine whether the final image is real or virtual.

If the image distance due to the last lens is positive, then the image is real and if the image distance due to the last lens is positive, then the image is virtual.

So, in our case,i3is negative, so that the image is virtual.

Therefore, the final image is virtual.

06

(d) Determine whether the final image is inverted or non-inverted.

If the total magnification is positive, then the image is non-inverted and if the total magnification is negative, then the image is inverted.

In our case, the total magnification is negative. So, the image is inverted.

Therefore, the final image is inverted.

07

(e) Determine the final image on the same side or opposite side of the object

From the result, (c) and conclude that the image is virtual i.e. the image forms on the same side of the lens 3 as the object.

Therefore, the final image is on the same side as the object.

The image distance for any lens and overall magnification of a three-lens system can be found using the corresponding formulae. The nature of the image can be predicted from the characteristics of the image formed due to the given three-lens system.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

You look down at a coin that lies at the bottom of a pool of liquid of depthand index of refraction(Fig. 34-57). Because you view with two eyes, which intercept different rays of light from the coin, you perceive the coin to bewhere extensions of the intercepted rays cross, at depthdainstead of d. Assuming that the intercepted rays in Fig. 34-57 are close to a vertical axis through the coin, show that da=dn.


A glass sphere has radius r=-50 cmand index of refraction n1=1.6paperweight is constructed by slicing through the sphere along a plane that is 2.0 cmfrom the center of the sphere, leaving height p = h = 3.0 cm. The paperweight is placed on a table and viewed from directly above by an observer who is distance d=8.0 cmfrom the tabletop (Fig. 34-39). When viewed through the paperweight, how far away does the tabletop appear to be to the observer?

A cheese enchilada is4.00cmin front of a converging lens. The magnification of the enchilada is-2.00. What is the focal length of the lens?

An object is 10.0 mm from the objective of a certain compound microscope. The lenses are 300 mm apart, and the intermediate image is 50.0 mm from the eyepiece. What overall magnification is produced by the instrument?

Figure 34-46a shows the basic structure of an old film camera. A lens can be moved forward or back to produce an image on film at the back of the camera. For a certain camera, with the distance i between the lens and the film set at f = 5.00 cm, parallel light rays from a very distant object O converge to a point image on the film, as shown. The object is now brought closer, to a distance of p = 100 cm, and the lens–film distance is adjusted so that an inverted real image forms on the film (Fig. 34-46b). (a) What is the lens–film distance i now? (b) By how much was distance i changed?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free