Three electromagnetic waves travel through a certain point P along an x-axis. They are polarized parallel to a y-axis, with the following variations in their amplitudes. Find their resultant at P.

E1=(10.00μV/m)sin[2×1014t]E2=(5.00μV/m)sin[2×1014t+45°]E3=(5.00μV/m)sin[2×1014t-45°]

Short Answer

Expert verified

The resultant amplitude of all waves at point P is17.1μV/m

Step by step solution

01

Identification of given data

The electric field amplitude of the first wave is A1=10μV/m.

The electric field amplitude of the second wave is role="math" localid="1663147301551" A2=5μV/m.

The electric field amplitude of the third wave is role="math" localid="1663147316555" A3=5μV/m.

The phase angle between first and second wave is ϕ1=45°.

The phase angle between second and third wave is ϕ2=90°.

The phase angle between first and third wave is ϕ3=45°.

02

Understanding the concept

The amplitude of the resultant wave is equal to the vector sum of the amplitude of each wave.

03

Determination of resultant amplitude of all waves at point P

The resultant amplitude of all wavesat point P is given as:

Er=A12+A22+A32+2A1A2cosϕ1+2A2A3cosϕ2+2A3A1cosϕ3

Substitute all the values in equation.

Hence, the resultant amplitude of all waves at point P is 17.1μV/m.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Transmission through thin layers. In Fig. 35-43, light is incident perpendicularly on a thin layer of material 2 that lies between (thicker) materials 1 and 3. (The rays are tilted only for clarity.) Part of the light ends up in material 3 as ray r3(the light does not reflect inside material 2) and r4(the light reflects twice inside material 2). The waves of and interfere, r3and r4here we consider the type of interference to be either maximum (max) or minimum (min). For this situation, each problem in Table 35-3 refers to the indexes of refraction n1,n2and n3the type of interference, the thin-layer thickness Lin nanometers, and the wavelength in nanometers of the light as measured in air. Where λis missing, give the wavelength that is in the visible range. Where Lis missing, give the second least thickness or the third least thickness as indicated.

In Fig. 35-45, a broad beam of light of wavelength 683 nm is sent directly downward through the top plate of a pair of glass plates. The plates are 120 mm long, touch at the left end, and are separated by 48.0μm at the right end. The air between the plates acts as a thin film. How many bright fringes will be seen by an observer looking down through the top plate?

Monochromatic green light, of wavelength 500 nm, illuminates two parallel narrow slits 7.70 mm apart. Calculate the angular deviation ( θin Fig. 35-10) of the third-order (m=3)bright fringe (a) in radians and (b) in degrees.

A thin film of acetone n=1.25coats a thick glass platen=1.50White light is incident normal to the film. In the reflections, fully destructive interference occurs at 600nmand fully constructive interference at700nm. Calculate the thickness of the acetone film.

Suppose that Young’s experiment is performed with blue-green light of wavelength 500 nm. The slits are 1.20 mm apart, and the viewing screen is 5.40 m from the slits. How far apart are the bright fringes near the center of the interference pattern?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free