Figure a shows, in cross section, three current-carrying wires that are long, straight, and parallel to one another. Wires 1 and 2 are fixed in place on an xaxis, with separation d. Wire 1 has a current of0.750A, but the direction of the current is not given. Wire 3, with a current of0.250Aout of the page, can be moved along the xaxis to the right of wire 2. As wire 3 is moved, the magnitude of the net magnetic forceF2on wire 2 due to the currents in wires 1 and 3 changes. The xcomponent of that force is F2xand the value per unit length of wire 2 isF2x/L2. Figure bgivesF2x/L2versus the position xof wire 3. The plot has an asymptoteF2xL2=-0.627μN/masx.The horizontal scale is set byxs=12.0cm. (a) What are the size of the current in wire 2 and (b) What is the direction (into or out of the page) of the current in wire 2?

Short Answer

Expert verified
  1. The current through wire 2 is i2=0.50A.
  2. The direction of current in wire 2 is out of page.

Step by step solution

01

Identification of given data

  1. Wire 1 carries a current of i1=0.750A.
  2. Wire 3 carries a current ofi3=0.250A
  3. The x component per unit length of wire 2 isF2xL2=-0.627μN/masx.
  4. The horizontal axes is set byxs=12.0cm
02

Significance of magnetic force between the parallel wires

A force will operate between two parallel wires carrying a current because of the interaction between the magnetic fields of the two wires. Each wire is being pulled in the same direction but with an equal amount of force.

By finding the value of distance dbetween wire 1 and 2 and substituting in Eq. 29-13, we can find the current through wire 2. Using information from the given graph, we can find the direction of the current in wire 2.

Formula:

From Eq. 29-13, the force between two parallel currents is

Fx=μ0Li1i22πd

The distance between wire 1 and 2 is
d=xi1i3

Where, μ0is the magnetic permeability of free space (4π×10-7NA- 2)

i1 is the current in wire 1

i2 is the current in wire 2

d is the distance separating the conductors

L is the length of conductor

03

(a) Determining the current through wire 2.

The curve in Fi. 29-64(b) passes through zero; this implies that the currents in wire 1 and 3 exert forces in opposite direction on wire 2. Thus, current i1points out of the page.

When wire 3 is at a great distance from wire 2, the only field that affects wire 2 is that caused by the current in wire 1 that is i1; in this case the force is negative.

This means that wire 2 is attached to wire 1 which implies that wire 2’s current is in the same direction as wire 1’s current i.e. out of page.

With wire 3 initially far away, the forceF12per unit length is given. Thus, from Eq. 29-13,

F12=μ0i1i22πd

When wire 3 is atx=0.04mthe curve passes through zero point, so the force between 2 and 3 must be equal.

From this, we can find the distance between wire 1 and 2

d=xi1i3=0.04m0.750A0.250A=0.12m

Therefore, from Eq. 29-13,

F12=-F2xL2=μ0i1i22πd0.627μN/m=4π×10-7NA- 20.750Ai22π0.12m

Thus, the current through wire 2 is

i2=2π6.27×10-7N/m0.12m4π×10-7NA- 20.75A=0.50A

04

(b) Determining the direction of current in wire 2.

The direction of i2is out of page as mentioned in part (a).

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Figure 29-62 shows, in cross section, two long straight wires held against a plastic cylinder of radius20.0cm. Wire 1 carries currentrole="math" localid="1663151041166" i1=60.0mAout of the page and is fixed in place at the left side of the cylinder. Wire 2 carries currenti2=40.0mAout of the page and can be moved around the cylinder. At what (positive) angleθ2should wire 2 be positioned such that, at the origin, the net magnetic field due to the two currents has magnitude80.0nT?

A long, hollow, cylindrical conductor (with inner radius 2.0mm and outer radius 4.0mm) carries a current of 24A distributed uniformly across its cross section. A long thin wire that is coaxial with the cylinder carries a current of 24A in the opposite direction. What is the magnitude of the magnetic field (a) 1.0mm,(b) 3.0mm, and (c) 5.0mm from the central axis of the wire and cylinder?

Figure 29-50ashows, in cross section, two long, parallel wires carrying current and separated by distance L. The ratio i1/i2 of their currents is4.00; the directions of the currents are not indicated. Figure 29-50bshows the ycomponent Byof their net magnetic field along the xaxis to the right of wire 2. The vertical scale is set by Bys=4.0nT , and the horizontal scale is set by xs=20.0cm . (a) At what value of x0 is Bymaximum?(b) If i2=3mA, what is the value of that maximum? What is the direction (into or out of the page) of (c) i1 and (d) i2?

An electron is shot into one end of a solenoid. As it enters the uniform magnetic field within the solenoid, its speed is 800m/s and its velocity vector makes an angle of30° with the central axis of the solenoid. The solenoid carries 4.0Aand has8000turns along its length. How many revolutions does the electron make along its helical path within the solenoid by the time it emerges from the solenoid’s opposite end? (In a real solenoid, where the field is not uniform at the two ends, the number of revolutions would be slightly less than the answer here.)

A long wire is known to have a radius greater than4.00mmand to carry a current that is uniformly distributed over its cross section. The magnitude of the magnetic field due to that current is0.28mTat a point4.0mmfrom the axis of the wire, and0.20mTat a point 10 mm from the axis of the wire. What is the radius of the wire?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free