A boy is initially seated on the top of a hemispherical ice mound of radiusR = 13.8 m. He begins to slide down the ice, with a negligible initial speed (Figure). Approximate the ice as being frictionless. At what height does the boy lose contact with the ice?

Short Answer

Expert verified

The height at which the boy lose contact with the ice is h = 9.20 m.

Step by step solution

01

Step 1: Given

The radius of the hemispherical ice mound is R = 0.138 m .

02

Determining the concept

Use the concept of the energy conservation law and gravitational potential energy of the boy. According to the law of energy conservation, energy can neither be created, nor be destroyed.

Formulae:

U=mghK=12mv2

Where,

K is kinetic energy, Uis potential energy, m is mass, v is velocity, g is an acceleration due to gravity and h is height.

03

Determining theheight at which the boy lose contact with the ice


Consider,FNis the normal force acting on the boy in the upward direction as shown in the free body diagram. The acceleration of the boy at that point is centripetal acceleration,

a=v22

According to the Newton’s second law,

Fnet=mamgcosθ-FN=mv22

The boy leaves the ice at the pointFN=0, then,

mgcosθ=mv22gcosθ=v22

(i)

The gravitational potential energy of the at the point where he leaves the mound is,

U=-mgR1-cosθ

The body starts from the rest. The kinetic energy at that point is,

K=12mv2

According to the energy conservation law,

0=12mv2-mgR1-cosθ12mv2=mgR1-cosθ12v2=gR1-cosθv2=2gR1-cosθEquationibecomessas,gcosθ=2gR1-cosθRcosθ=21-cosθcosθ=2-2cosθ3cosθ=2cosθ=23

The height of the boy above the bottom of the mound is,

h=Rcosθh=13.8mx23h=9.20m

Hence, the height at which the boy lose contact with the ice is h = 9.20 m

Therefore, the height of the boy at the point where he leaves the mound can be found by using the concept of conservation of energy and the gravitational potential energy.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A single force acts on a 3.0 kgparticle-like object whose position is given byx=3.0t-4.0t2+1.0t3, with x in meters and t in seconds. Find the work done by the force fromt=0tot=4.0s.

Question: Antarctica is roughly semicircular, with a radius of 2000 km (Fig. 1-5). The average thickness of its ice cover is 3000 m. How many cubic centimeters of ice does Antarctica contain? (Ignore the curvature of Earth.)

Figure 1-5Problem 9

The block in Fig. 7-10a lies on a horizontal frictionless surface, and the spring constant is 50N/m. Initially, the spring is at its relaxed length and the block is stationary at position x=0. Then an applied force with a constant magnitude of 3.0 N pulls the block in the positive direction of the x axis, stretching the spring until the block stops. When that stopping point is reached, what are (a) the position of the block, (b) the work that has been done on the block by the applied force, and (c) the work that has been done on the block by the spring force? During the block’s displacement, what are (d) the block’s position when its kinetic energy is maximum and (e) the value of that maximum kinetic energy?

An old English cookbook carries this recipe for cream of nettle soup: “Boil stock of the following amount: 1 breakfastcup plus 1 teacup plus 6 tablespoons plus 1 dessertspoon. Using gloves, separate nettle tops until you have 0.5 quart; add the tops to the boiling stock. Add 1 tablespoon of cooked rice and 1 saltspoon of salt. Simmer for 15 min.” The following table gives some of the conversions among old (premetric) British measures and among common (still premetric) U.S. measures. (These measures just scream for metrication.) For liquid measures, 1 British teaspoon = 1 U.S. teaspoon. For dry measures, 1 British teaspoon = 2 U.S. teaspoons and 1 British quart =1 U.S. quart. In U.S. measures, how much (a) stock, (b) nettle tops, (c) rice, and (d) salt are required in the recipe?

Old British Measures

U.S. Measures

teaspoon = 2 saltspoons

tablespoon = 3 teaspoons

dessertspoon = 2 teaspoons

half cup = 8 tablespoons

tablespoon = 2 dessertspoons

cup = 2 half cups

teacup = 8 tablespoons


breakfastcup = 2 teacups


Gold, which has a density of19.32g/cm3, is the most ductile metal and can be pressed into a thin leaf or drawn out into a long fiber. (a) If a sample of gold, with a mass of 27.63 g, is pressed into a leaf of 1.000 µm thickness, what is the area of the leaf? (b) If, instead, the gold is drawn out into a cylindrical fiber of radius 2.500 µm, what is the length of the fiber?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free