Two blocks, of masses M = 2.0 kgand 2M, are connected to a spring of spring constantk = 200 N/mthat has one end fixed, as shown in Fig. 8-69. The horizontal surface and the pulley has negligible mass. The blocks are released from rest with the spring relaxed. (a) What is the combined kinetic energy of the two blocks when the hanging block has fallen 0.090m? (b) What is the kinetic energy of the hanging block when it has fallen that 0.090m ?(c) What maximum distance does the hanging block fall before momentarily stopping?

Short Answer

Expert verified
  1. The combined kinetic energy of two blocks is 2.7 J
  2. The kinetic energy of the hanging block is 1.8 J
  3. The maximum distance through which the hanging block falls before momentarily stopping is 0.39 m

Step by step solution

01

The given data

The masses of the two blocks, M = 2.0 kg and 2M

The spring constant of the spring, k = 200 N/m

The height of fall, h = 0.090 m

02

Understanding the concept of energy

We can find the kinetic energy of the system and the hanging mass using the law of conservation energy. The maximum distance traveled by the hanging mass can be calculated by putting the velocity of it equal to zero in the equation obtained in part a for energy conservation.

Formulae:

The potential energy at a height, PE = mgh (1)

The kinetic energy of the body, KE=12mv2 (2)

From energy conservation of the system, Ui+K.Ei=Uf+K.E.f (3)

03

a) Calculation of the combined kinetic energy

Let the initial P.E. of the hanging block is zero and the upward direction is positive.

Using equation (1), the combined kinetic energy of the blocks using equations (1) and (2) is given as:

0J+0J=mgh+12kx2+K.Ef0J=22.0kg9.8m/s2-0.090m+12200N/m0.090m2+K.E.fK.E.f=2.7J

Therefore, the combined kinetic energy of two blocks is 2.7J.

04

b) Calculation of the kinetic energy of the hanging block

From part a) we can write that, the kinetic energy of a mass is:

123Mv2=2.7J12Mv2=0.9J

The kinetic energy of the hanging mass is, given using the above equation:

122Mv2=2×0.9J=1.8J

Therefore, the kinetic energy of the hanging block is 1.8 J

05

c) Calculation of the maximum distance of the fall

When the hanging block stops, the law of conservation of energy gives the maximum distance of the fall which is given using equations (1), (2), and (3) as follows:

0J+0J=2M×g×-d+12×k×d2+0J2M×g×-d+12×k×d2=022.0kg9.8m/s2-d+12200N/m-d2=0d=0.39m

Therefore, the maximum distance through which the hanging block falls before momentarily stopping is 0.39 m

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A machine pulls a 40 kgtrunk 2.0 mup a40°ramp at a constant velocity, with the machine’s force on the trunk directed parallel to the ramp. The coefficient of kinetic friction between the trunk and the ramp is 0.40. What are (a) the work done on the trunk by the machine’s force and (b) the increase in thermal energy of the trunk and the ramp?

A single conservative forceF(x)acts on a 1.0 kg particle that moves along an x axis. The potential energy U(x) associated with role="math" localid="1661227819293" F(x)is given by U(x)=-4xe-x4J, where xis in meters. Atthe particle has a kinetic energy of 2.0 J. (a) What is the mechanical energy of the system? (b) Make a plot of U(x)as a function of xfor 0x10m, and on the same graph draw the line that represents the mechanical energy of the system. Use part (b) to determine (c) the least value of xthe particle can reach and (d) the greatest value of x the particle can reach. Use part (b) to determine (e) the maximum kinetic energy of the particle and (f) the value of xat which it occurs. (g) Determine an expression in newtons and meters for F(x)as a function of x. (h) For what (finite) value of xdoesF(x)=0?

A river descends 15 mthrough rapids. The speed of the water is 3.2 m/supon entering the rapids and 13 m/supon leaving. What percentage of the gravitational potential energy of the water–Earth system is transferred to kinetic energy during the descent? (Hint: Consider the descent of, say, 10 kgof water.)

Figure shows a plot of potential energy Uversus position x.of a 0.200 kg particle that can travel only along an xaxis under the influence of a conservative force. The graph has these values: , UA=9.00J,UC=20.00J, and UD=24.00J. The particle is released at the point where Uforms a “potential hill” of “height” UB=12.00J, with kinetic energy 4.00 J. What is the speed of the particle at: (a) x = 3.5 m (b) x= 6.5 m? What is the position of the turning point on (c) the right side (d) the left side?

A cookie jar is moving up an 40°incline. At a point 55 cm from the bottom of the incline (measured along the incline), the jar has a speed of 1.4 m/s . The coefficient of kinetic friction between jar and incline is 0.15 . (a) How much farther up the incline will the jar move? (b) How fast will it be going when it has slid back to the bottom of the incline? (c) Do the answers to (a) and (b) increase, decrease, or remain the same if we decrease the coefficient of kinetic friction (but do not change the given speed or location)?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free