A horizontal vinyl record of mass 0.10kg and radius0.10mrotates freely about a vertical axis through its centre with an angular speed of4.7rad/s.The rotational inertia of the record about its axis of rotation is5.0×104kgm2.A wad of wet putty of mass0.020kg.drops vertically onto the record from above and sticks to the edge of the record. What is the angular speed of the record immediately after the putty sticks to it?

Short Answer

Expert verified

Angular speed of record immediately after dropping the putty on the record isω=3.4rad/s.

Step by step solution

01

Step 1: Given

ωi=4.7rad/sIi=5×104kg.m2M=0.02kgR=0.10m

02

Determining the concept

Find the initial angular momentum of the record before dropping the putty on it. As angular momentum is conserved when no external torque acts on it, find the final angular velocity of the record after dropping the putty on it.According tothe conservation of momentum, momentum of a system is constant if no external forces are acting on the system.

Formula is as follow:

Initialangularmomentum=Finalangularmomentum

03

Determining the angular speed of record immediately after dropping the putty on the record

According to law of conservation of momentum:

Initialangularmomentum=Finalangularmomentum

Li=LfIiωi=IfωfIf=Ii+mR2=5×104+(0.02×0.12)=7×104kg.m25×104×4.7=(7×104)×ωf

ωf=3.4rad/s

Hence,the angular speed of record immediately after dropping the putty on the record isω=3.4rad/s.

Therefore, by applying law of conservation of angular momentum, the final angular speed can be calculated.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Question: Figure shows the potential energy U (x) of a solid ball that can roll along an xaxis. The scale on the Uaxis is set by Us =100j. The ball is uniform, rolls smoothly, and has a mass of 0.400 kgIt is released at x = 7.0 mheaded in the negative direction of the xaxis with a mechanical energy of 75 J (a) If the ball can reach x = 0 m, what is its speed there, and if it cannot, what is its turning point? Suppose, instead, it is headed in the positive direction of the xaxis when it is released at x = 7.0 m with 75J(b) If the ball can reach x = 13m, what is its speed there, and if it cannot, what is its turning point?

Question: A particle moves through an xyz coordinate system while a force acts on the particle. When the particle has the position vector r=(2.00m)i^-(3.00m)j^+(2.00m)k^,the force is given by F=Fxi^+(7.00N)j^-(6.00N)k^and the corresponding torque about the origin isτ=(4.00Nm)i^+(2.00Nm)j^-(1.00Nm)k^. Determine.

A bowler throws a bowling ball of radius R=11cmalong a lane. The ball (in figure) slides on the lane with initial speed vcom,0=8.5m/sand initial angular speed ω0=0. The coefficient of kinetic friction between the ball and the lane is. The kinetic frictional forcefkacting on the ball causes a linear acceleration of the ball while producing a torque that causes an angular acceleration of the ball. When speed vcom has decreased enough and angular speed v has increased enough, the ball stops sliding and then rolls smoothly.

(a) What then is vcomin terms ofV? During the sliding (b) What is the ball’s linear acceleration (c) What is the angular acceleration? (d) How long does the ball slide? (e) How far does the ball slide? (f) What is the linear speed of the ball when smooth rolling begins?

At the instant of Figure, a 2.0kg particle Phas a position vector r of magnitude 3.0mand angle θ1=45o and a velocity vectorv of magnitude 4.0m/sand angleθ2=300. ForceF, of magnitude 2.0Nand angleθ3=30oacts on P. All three vectors lie in the xy plane. About the origin, (a) What is the magnitude of the angular momentum of P? (b) What is the direction of the angular momentum of P? (c) What is the magnitude of the torque acting on P? (d)What is the direction of the torque acting on P?

Non-uniform cylindrical object.InFigure, a cylindrical object of massMand radius Rrolls smoothly from rest down a ramp and onto a horizontal section. From there it rolls off the ramp and onto the floor, landing a horizontal distance d = 0.506m from the end of the ramp. The initial height of the object is H = 0.90m ; the end of the ramp is at height h = 0.10m . The object consists of an outer cylindrical shell (of a certain uniform density) that is glued to a central cylinder (of a different uniform density). The rotational inertia of the object can be expressed in the general form l=βMR2but b is not 0.5as it is for a cylinder of uniform density. Determine β.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free