In Figure, a 30kg child stands on the edge of a stationary merry-go-round of radius2.0mthe rotational inertia of the merry-go-round about its rotation axis is150kg.m2.the child catches a ball of mass1.0kg.thrown by a friend. Just before the ball is caught, it has a horizontal velocityvof magnitude12m/s, at angleφ=37°with a line tangent to the outer edge of the merry-go-round, as shown. What is the angular speed of the merry-go-round just after the ball is caught?

Short Answer

Expert verified

The angular speed of merry-go-round is ω=0.07rad/s.

Step by step solution

01

Step 1: Given

Im=150kg.m2r=2mϕ=370

02

Determining the concept

Firstly, find the unknown speed using the law of conservation of angular momentum. According tothe conservation of momentum, momentum of a system is constant if no external forces are acting on the system.

Formula are as follow:

L=mvr.sinθ

where,m is mass, v is velocity, L is angular momentum and r is radius.

03

Determining the angular speed of merry-go-round

According to law of conservation of angular momentum:

Initialangularmomentum=Finalangularmomentum

Li=LfLi=mvrsin(90ϕ)

sin(90ϕ)=cosϕ

Li=mvrcosϕ

Li=1×12×2×cos(370)=19.17kg.m2/sLf=Lf=(150+30×22+1×22)ωLi=274×ω

Hence,

19.17=274×ωω=0.07rad/s

Hence,the angular speed of merry-go-round is ω=0.07rad/s.

Therefore, using the law conservation of angular momentum, the unknown angular speed can be calculated.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

Figure shows an overhead view of a ring that can rotate about its centre like a merry- go-round. Its outer radius R2isrole="math" localid="1660990374636" 0.800m, its inner radiusR1 isR2/2.00, its massM is8.00kg, and the mass of the crossbars at its centre is negligible. It initially rotates at an angular speed of 8.00 rad/s with a cat of massm=M/4.00on its outer edge, at radiusR2. By how much does the cat increase the kinetic energy of the cat ring system if the cat crawls to the inner edge, at radius?

Two disks are mounted (like a merry-go-round) on low-friction bearings on the same axle and can be brought together so that they couple and rotate as one unit. The first disk, with rotational inertia 3.30kg.m2about its central axis, is set spinning counter clockwise at 450rev/min. The second disk, with rotational inertia 6.60kgm2about its central axis, is set spinning counter clockwise at 900rev/min.They then couple together.

(a) What is their angular speed after coupling? If instead the second disk is set spinning clockwise at 900 rev/min,

(b) what are their angular speed?

(c) What are their direction of rotation after they couple together?

A horizontal platform in the shape of a circular disk rotates on a frictionless bearing about a vertical axle through the centre of the disk. The platform has a mass of 150kg, a radius of2.0m, and a rotational inertia of300kg.m2about the axis of rotation. A60kgstudent walks slowly from the rim of the platform toward the centre. If the angular speed of the system is1.5rad/swhen the student starts at the rim, what is the angular speed when she is0.50mfrom the centre?

Two 2.00kgballs are attached to the ends of a thin rod of length role="math" localid="1661007264498" 50.0cmand negligible mass. The rod is free to rotate in a vertical plane without friction about a horizontal axis through its center. With the rod initially horizontal (In Figure), 50.0gwad of wet putty drops onto one of the balls, hitting it with a speed of3.00m/s and then sticking to it.

(a) What is the angular speed of the system just after the putty wad hits?

(b) What is the ratio of the kinetic energy of the system after the collision to that of the putty wad just before?

(c) Through what angle will the system rotate before it momentarily stops?

Question: A sanding disk with rotational inertia1.2×10-3kgm2is attached to an electric drill whose motor delivers a torque of magnitude 16 Nm about the central axis of the disk. About that axis and with the torque applied for 33 ms,

(a) What is the magnitude of the angular momentum? (b) What is the magnitude of the angular velocity of the disk?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free