A car starts from rest and moves around a circular track of radius30.0M. Its speed increases at the constant rate of 0.500M/S2. (a) What is the magnitude of its net linear acceleration 15.0slater? (b) What angle does this net acceleration vector make with the car’s velocity at this time?

Short Answer

Expert verified
  1. The magnitude of net linear acceleration 15s later is, a=1.94m/s2
  2. The angle this net acceleration vector makes with the car’s velocity is, θ=75.1.

Step by step solution

01

Understanding the given information

  1. The radius is, r = 30.0m.
  2. The constant acceleration of car is, a = 0.500m/s2.
  3. Time is t = 15.0s.
02

Concept and Formula used for the question

By using kinematic equation, we can find the linear velocity v.By usingthis v, we can find the angular velocity ωand angular acceleration α, and using all these values, we can find the magnitude of net linear acceleration15 slater and theangle this net acceleration vector makes with the car’s velocity.

  1. The kinematic equation is v=v0+at
  2. The angular velocity is ω=vr
  3. The angular acceleration is α=ωt
  4. The tangential acceleration isat=αr
  5. The radial acceleration is ar=ω2r
  6. The magnitude of acceleration is role="math" localid="1661063908108" |a|=(ar2+at2)
  7. The angle this net acceleration vector makes with the car’s velocity is θ=tan-1(arat)
03

(a) Calculation for the magnitude of net linear acceleration  later

We know that the kinematic equation is

v=v0+at

But v0=0, so the linear velocity v is given by

v=at

Substitute the all the value in the above equation.

v=0.500m/s2×15s=7.50m/s

The angular velocity ωis given by

ω=vr

Substitute the all the value in the above equation.

ω=7.50m/s30.0m=0.250rad/s

Now, the angular acceleration is given by

α=ωt

Substitute the all the value in the above equation.

α=0.250rad/s15s=0.017rad/s2

The radial acceleration is given by

ar=ω2r

Substitute the all the value in the above equation.

ar=0.250rad/s22×30.0m=1.875m/s2

The tangential acceleration is given by

at=αr

Substitute the all the value in the above equation.

at=0.0166rad/s2×30.0m=0.50m/s2

Thus, the magnitude of net linear acceleration is

|a|=(ar2+at2)

Substitute the all the value in the above equation.

|a|=1.875m/s22+0.50m/s22=1.94m/s2

Hence the linear acceleration is, 1.94m/s2.

04

(b) Calculation for the angle the net acceleration vector makes with the car’s velocity at this time

The angle this net acceleration vector makes with the car’s velocity at this time is

θ=tan-1arat

Substitute the all the value in the above equation.

θ=tan-11.875m/s20.500m/s2=75.1o

Hence the angle is, 75.1o.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

In Figure a wheel of radius 0.20m is mounted on a frictionless horizontal axis. The rotational inertia of the wheel about the axis is 0.40kg.m2. A mass less cord wrapped around the wheel’s circumference is attached to a6.0kg box. The system is released from rest. When the box has a kinetic energy of 6.0j,

(a) The wheel’s rotational kinetic energy and

(b) The distance the box has fallen?

A uniform spherical shell of mass M=4.5kgand radius R=8.5cmcan r otate about a vertical axis on frictionless bearings (Fig.10-47). A massless cord passes around the equator of the shell, over a pulley of rotational inertia l=3.0×10-3kgm2and radius,r=5.0cmand is attached to a small object of mass .m=0.60kgThere is no friction on the pulley’s axle; the cord does not slip on the pulley. What is the speed of the object when it has fallen 82cmafter being released from rest? Use energy considerations.

In Fig. 1035, three 0.0100 kgparticles have been glued to a rod of length L=6.00 cmand negligible mass and can rotate around a perpendicular axis through point Oat one end. How much work is required to change the rotational rate

(a) from 0torole="math" localid="1660925307834" 20.0 rad/s,

(b) from20.0 rad/sto40.0 rad/s, and

(c) from40.0 rad/sto60.0 rad/s?

(d) What is the slope of a plot of the assembly’s kinetic energy (in joules) versus the square of its rotation rate (in radians squared per second squared)?

A uniform helicopter rotor blade is 7.80mlong, has a mass of110kg , and is attached to the rotor axle by a single bolt. (a) What is the magnitude of the force on the bolt from the axle when the rotor is turning at320rev/min? (Hint: For this calculation the blade can be considered to be a point mass at its center of mass. Why?) (b) Calculate the torque that must be applied to the rotor to bring it to full speed from rest in6.70s . Ignore air resistance. (The blade cannot be considered to be a point mass for this calculation. Why not? Assume the mass distribution of a uniform thin rod.) (c) How much work does the torque do on the blade in order for the blade to reach a speed of 320rev/min?

In Fig.10-41, two blocks, of mass m1=400gandm2=600g, are connected by a massless cord that is wrapped around a uniform disk of massM=500gand radius R=12.0cm. The disk can rotate without friction about a fixed horizontal axis through its centre; the cord cannot slip on the disk. The system is released from rest. Find (a) the magnitude of the acceleration of the blocks, (b) the tension in the cord at the left, and (c) the tensionT2in the cord at the right.

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free