What are (a) the lowest frequency, (b) the second lowest frequency, and (c) the third lowest frequency for standing waves on a wire that is10.0 m long, has a mass of 100 g, and is stretched under a tension of 250 N?

Short Answer

Expert verified
  1. The lowest frequency is 7.91 Hz
  2. The second lowest frequency is 15.8 Hz
  3. The third lowest frequency is 23.7 Hz

Step by step solution

01

Given data

The length of the wire is L = 10.0 m

The mass of the wire isM = 100 g = 0.100 kg

The tension in the wire isτ=250N

02

Understanding the concept of frequency

By simplifying the equation for frequencies using the formulas of the possible wavelengths, their corresponding frequencies, the wave speed, and the linear mass density, we can find them, and the lowest frequencies for the standing wave.

Formula:

The resonant frequency of a wave,f=vλ.....(1)

The speed of the wave v=τμ......(2)

The nth frequency of a wave, fn=nv2L.......(3)

03

Step 3(a): Calculation of the lowest frequency

The possible wavelengths are given by:

λ=2Ln

where, L is the length of the wire andis an integer

The corresponding frequencies are given by

Using the linear density formula in equation (2), we get

v=τLM(μ=ML)

Thus, substituting the above value in equation (3) and the given values, we get

fn=n2τLMfn=n225010.0×0.100=7.91nHz..........(4)

The lowest frequency is given by:

f1=7.91Hz

Hence, the lowest value of frequency is 7.91 Hz

04

Step 4(b): Calculation of the second lowest frequency

The second lowest frequency using equation (4) is given by:

f2=7.91×2=15.8Hz

Hence, the value of second lowest frequency is 15.8 Hz

05

Step 5(c): Calculation of third lowest frequency

Similarly, the third lowest frequency using equation (4) is given by:

f3=7.91×3=23.7Hz

Hence, the value of third lowest frequency is 23.7 Hz

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with Vaia!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A string under tension τi oscillates in the third harmonic at frequency f3, and the waves on the string have wavelength λ3. If the tension is increased to τf=4τi and the string is again made to oscillate in the third harmonic. What then are (a) the frequency of oscillation in terms of f3 and (b) the wavelength of the waves in terms of λ3?

A 1.50 mwire has a mass of 8.70 gand is under a tension of 120 N. The wire is held rigidly at both ends and set into oscillation. (a) What is the speed of waves on the wire? What is the wavelength of the waves that produce (b) one-loop and (c) two loop standing waves? What is the frequency of the waves that produce (d) one-loop and (e) two-loop standing waves?

Two sinusoidal 120 Hzwaves, of the same frequency and amplitude, are to be sent in the positive direction of an xaxis that is directed along a cord under tension. The waves can be sent in phase, or they can be phase-shifted. Figure 16-47 shows the amplitude yof the resulting wave versus the distance of the shift (how far one wave is shifted from the other wave). The scale of the vertical axis is set byys=6.0mm. If the equations for the two waves are of the formy(x,t)=ymsin(kx-ωt), what are (a)ym, (b) k, (c)ω, and (d) the correct choice of sign in front ofω?

A wave on a string is described by y(x,t)=15.0sin(πx/8-4πt), where xand yare in centimeters and tis in seconds. (a) What is the transverse speed for a point on the string at x = 6.00 cm when t = 0.250 s? (b) What is the maximum transverse speed of any point on the string? (c) What is the magnitude of the transverse acceleration for a point on the string at x = 6.00 cm when t = 0.250 s? (d) What is the magnitude of the maximum transverse acceleration for any point on the string?

Body armor. When a high-speed projectile such as a bullet or bomb fragment strikes modern body armor, the fabric of the armor stops the projectile and prevents penetration by quickly spreading the projectile’s energy over a large area. This spreading is done by longitudinal and transverse pulses that move radiallyfrom the impact point, where the projectile pushes a cone-shaped dent into the fabric. The longitudinal pulse, racing along the fibers of the fabric at speedahead of the denting, causes the fibers to thin and stretch, with material flowing radially inward into the dent. One such radial fiber is shown in Fig. 16-48a. Part of the projectile’s energy goes into this motion and stretching. The transverse pulse, moving at a slower speedvt, is due to the denting. As the projectile increases the dent’s depth, the dent increases in radius, causing the material in the fibers to move in the same direction as the projectile (perpendicular to the transverse pulse’s direction of travel). The rest of the projectile’s energy goes into this motion. All the energy that does not eventually go into permanently deforming the fibers ends up as thermal energy. Figure 16-48bis a graph of speed vversus time tfor a bullet of mass 10.2g fired from a .38 Special revolver directly into body armor. The scales of the vertical and horizontal axes are set byvs=300m/sandts=4.00μs. TakevI=2000m/s, and assume that the half-angle θof the conical dent is60°. At the end of the collision, what are the radii of (a) the thinned region and (b) the dent (assuming that the person wearing the armor remains stationary)?

See all solutions

Recommended explanations on Physics Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.

Sign-up for free